Development and testing of an Automated Building Commissioning Analysis Tool (ABCAT)

Abstract Experience has shown that buildings on average may consume 20% more energy than required for occupant comfort which by one estimate leads to $18 billion wasted annually on energy costs in commercial buildings in the United States. Experience and large scale studies of the benefits of commissioning have shown the effectiveness of these services in improving the energy efficiency of commercial buildings. While commissioning services do help reduce energy consumption and improve performance of buildings, the benefits of the commissioning tend to degrade over time. In order to prolong the benefits of commissioning, a prototype fault detection and diagnostic tool intended to aid in reducing excess energy consumption known as an Automated Building Commissioning Analysis Tool (ABCAT) has been developed and tested. ABCAT is a first principles based whole building level top down tool which does not require the level of expertise and investment associated with detailed component level methods. ABCAT utilizes a calibrated mathematical model to predict energy consumption for given weather conditions. A detailed description of the methodology is presented along with testing results. Results from retrospective and live test case applications are presented where the tool was used to successfully identify significant energy consumption deviations.

[1]  David E. Claridge,et al.  A Four-Parameter Change-Point Model for Predicting Energy Consumption in Commercial Buildings , 1992 .

[2]  J House,et al.  An Expert Rule Set For Fault Detection In Air-Handling Units | NIST , 2001 .

[3]  David E. Claridge,et al.  EMODEL: A NEW TOOL FOR ANALYZING BUILDING ENERGY USE DATA , 1993 .

[4]  Mary Ann Piette,et al.  Evaluation of Retrocommissioning Persistence in Large Commercial Buildings , 2004 .

[5]  Jeff Haberl,et al.  Literature Review of Uncertainty of Analysis Methods (Inverse Model Toolkit), Report to the Texas Commission on Environmental Quality , 2004 .

[6]  Jeff Haberl,et al.  Engineering uncertainty analysis in the evaluation of energy and cost savings of cooling system alternatives based on field-monitored data , 1999 .

[7]  Philip Haves,et al.  STUDY OF ON-LINE SIMULATION FOR WHOLE BUILDING LEVEL ENERGY CONSUMPTION FAULT DETECTION AND OPTIMIZATION , 2003 .

[8]  D. E. Claridge,et al.  Signatures of Heating and Cooling Energy Consumption for Typical AHUs , 1998 .

[9]  L. Demsetz,et al.  Building data visualization for diagnostics , 1996 .

[10]  Soolyeon Cho.  The Persistence of Savings Obtained from Commissioning of Existing Buildings , 2008 .

[11]  Jeff Haberl,et al.  Predicting hourly building energy usage , 1994 .

[12]  Martin Fischer,et al.  A method to compare simulated and measured data to assess building energy performance , 2012 .

[13]  David E. Claridge,et al.  The Cost-Effectiveness of Commissioning , 2005 .

[14]  Mary Ann Piette,et al.  Comparison of emerging diagnostic tools for large commercial HVAC systems , 2001 .

[15]  Margaret F. Fels,et al.  The stability of PRISM estimates , 1986 .

[16]  J. S. Haberl,et al.  Use of metered data analysis to improve building operation and maintenance: Early results from two federal complexes , 1988 .

[17]  J. S. Haberl,et al.  Diagnosing building operational problems , 1989 .

[18]  Joseph Andrew Clarke,et al.  Simulation-assisted control in building energy management systems , 2002 .

[19]  Peng Xu,et al.  Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems , 2002 .

[20]  Suwon Song,et al.  Development of New Methodologies for Evaluating the Energy Performance of New Commercial Buildings , 2006 .

[21]  Philip Haves,et al.  Analysis of an information monitoring and diagnostic system to improve building operations , 2001 .

[22]  David E. Claridge,et al.  Development and Testing of an Automated Building Commissioning Analysis Tool (ABCAT) , 2010 .

[23]  Frank Painter.  Whole-Building Commercial HVAC System Simulation for Use in Energy Consumption Fault Detection , 2007 .

[24]  Richard C. Diamond,et al.  Performance validation and energy analysis of HVAC systems using simulation , 2000 .

[25]  Refrigerating.  2001 ASHRAE handbook : fundamentals , 2001 .

[26]  Fu Xiao,et al.  A system-level fault detection and diagnosis strategy for HVAC systems involving sensor faults , 2010 .

[27]  Mary Ann Piette,et al.  Comparative guide to emerging diagnostic tools for large commercial HVAC systems , 2001 .

[28]  Jonathan A. Wright,et al.  Demonstration of Fault Detection and Diagnosis Methods for Air-Handling Units , 2002 .

[29]  E. Mills.  Building commissioning: a golden opportunity for reducing energy costs and greenhouse gas emissions in the United States , 2010 .

[30]  C. Toole,et al.  Review on Persistence of Commissioning Benefits in New and Existing Buildings , 2006 .

[31]  David E. Claridge,et al.  An expert system for building energy consumption analysis: prototype results , 1987 .

[32]  Shengwei Wang,et al.  Sensor fault detection and validation of VAV terminals in air conditioning systems , 2005 .

[33]  T. Agami Reddy,et al.  Evaluation of the Suitability of Different Chiller Performance Models for On-Line Training Applied to Automated Fault Detection and Diagnosis (RP-1139) , 2003 .

[34]  Kristin H. Heinemeier.  User and Market Factors that Influence Diagnostic Tool Development , 1999 .

[35]  J. Klein Woud,et al.  On-line failure diagnosis for compression refrigeration plants , 1995 .

[36]  Jeff Haberl,et al.  Development of Graphical Indices for Viewing Building Energy Data: Part II , 1998 .

[37]  David E. Claridge,et al.  Continuous Commissioning Results Verification and Follow-up For an Institutional Building: A Case Study , 2002 .

[38]  Srinivas Katipamula,et al.  Review Article: Methods for Fault Detection, Diagnostics, and Prognostics for Building Systems—A Review, Part I , 2005 .

[39]  David E. Claridge,et al.  Persistence of Savings Obtained from Continuous Commissioning SM , 2001 .

[40]  Rolf Isermann,et al.  Process fault detection based on modeling and estimation methods - A survey , 1984, Autom..

[41]  M. Liu,et al.  Application of calibrated HVAC system models to identify component malfunctions and to optimize the operation and control schedules , 1995 .

[42]  Seung Uk Lee.  Automatic Calibration of a Building Energy Performance Model and Remote Fault Detection For Continuous Commissioning Using a Global Optimization Program , 2002 .

[43]  Philip Haves,et al.  Condition monitoring in HVAC subsystems using first principles models , 1996 .

[44]  Jie Chen,et al.  Model-based methods for fault diagnosis: some guide-lines , 1995 .

[45]  Todd M. Rossi,et al.  A Statistical, Rule-Based Fault Detection and Diagnostic Method for Vapor Compression Air Conditioners , 1997 .

[46]  Paul Raftery,et al.  Key factors methodology—A novel support to the decision making process of the building energy manager in defining optimal operation strategies , 2012 .

[47]  Minitab.  Statistical Methods for Quality Improvement , 2001 .

[48]  Krishnan Gowri,et al.  Automated Fault Detection and Diagnostics for Outdoor-Air Ventilation Systems and Economizers: Methodology and Results from Field Testing , 1999 .

[49]  David E. Claridge,et al.  Use of Calibrated HVAC System Models to Optimize System Operation , 1998 .

[50]  David E. Claridge,et al.  Simplified Building and Air-handling Unit Model Calibration and Applications , 2004 .

[51]  Jeff Haberl,et al.  Procedures for Calibrating Hourly Simulation Models to Measured Building Energy and Environmental Data , 1998 .

[52]  J. F. Kreider,et al.  Detecting whole building energy problems , 1999 .