Effect of energy efficient building elements on summer cooling of buildings

[1]  Guohui Gan,et al.  A parametric study of Trombe walls for passive cooling of buildings , 1998 .

[2]  Zhiliang Zhang,et al.  Numerical study on the heat storing capacity of concrete walls with air cavities , 2009 .

[3]  H. S. Matthews,et al.  Cost-Effectiveness of Green Roofs , 2010 .

[4]  Charles J. Kibert,et al.  Sustainable Construction : Green Building Design and Delivery , 2005 .

[5]  Rahul V. Ralegaonkar,et al.  Design development of a static sunshade using small scale modeling technique , 2005 .

[6]  Maria Kolokotroni,et al.  Cool roof technology in London: An experimental and modelling study , 2013 .

[7]  M. F. El-Refaie.  Performance analysis of external shading devices , 1987 .

[8]  Dominique Derome,et al.  Exposure to Condensation Moisture of Sheathing in Retrofitted Leaky Wall Assemblies , 2006 .

[9]  P. S. S. Srinivasan,et al.  A performance of hollow clay tile (HCT) laid reinforced cement concrete (RCC) roof for tropical summer climates , 2007 .

[10]  Armando C. Oliveira,et al.  Solar chimneys: simulation and experiment , 2000 .

[11]  P. J. García Nieto,et al.  Analysis and optimization of the heat-insulating light concrete hollow brick walls design by the finite element method , 2007 .

[12]  A. N. Fried,et al.  Thermal properties of a variable cavity wall , 2001 .

[13]  Kunal Jain,et al.  Indigenous architecture of two Indian deserts and modern climatic responsive solutions , 1996 .

[14]  Nikhil K. Kapur.  A comparative analysis of the radiant effect of external sunshades on glass surface temperatures , 2004 .

[15]  Ali Bolatturk,et al.  Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey , 2008 .

[16]  N. K. Bansal,et al.  Calculation of appropriate size fixed sunshade overhangs over windows of different orientations , 1986 .

[17]  Jean-Jacques Bezian,et al.  Numerical study of a ventilated facade panel , 1996 .

[18]  Rajiv Gupta,et al.  Design development and thermal performance evaluation of static sunshade and brick cavity wall: An experimental study , 2013 .

[19]  S. Szokolay,et al.  The Building Envelope , 2021, Building Services Engineering.

[20]  Håkan Håkansson,et al.  Description of ParaSol v3.0 and comparison with measurements , 2007 .

[21]  Francesco Leccese,et al.  Ventilated facades energy performance in summer cooling of buildings , 2003 .

[22]  Francesco Leccese,et al.  Energy analysis of ventilated and microventilated roofs , 2005 .

[23]  G. N. Tiwari,et al.  A comparison of passive cooling techniques , 1994 .

[24]  Angus Gentle,et al.  Optimized cool roofs: Integrating albedo and thermal emittance with R-value , 2011 .

[25]  Riccardo Maria Pulselli,et al.  Energy and emergy based cost–benefit evaluation of building envelopes relative to geographical location and climate , 2009 .

[26]  William A. Beckman,et al.  TRNSHD - A PROGRAM FOR SHADING AND INSOLATION CALCULATIONS , 2000 .

[27]  Fariborz Haghighat,et al.  CFD Analysis of Turbulent Natural Ventilation in Double-Skin Façade: Thermal Mass and Energy Efficiency , 2010 .

[28]  Rajiv Gupta,et al.  Annual Thermal Performance of a Hollow Roof in Combination with a Cavity Wall and Static Sunshade: Experimental Study of Energy-Efficient Rooms , 2013 .

[29]  A. W. Pratt.  Variable heat flow through walls of cavity construction, naturally exposed , 1965 .

[30]  C. Balocco.  A simple model to study ventilated facades energy performance , 2002 .

[31]  Yair Etzion.  An improved solar shading design tool , 1992 .

[32]  Chitrarekha Kabre.  WINSHADE: A COMPUTER DESIGN TOOL FOR SOLAR CONTROL , 1998 .

[33]  Wilhelm A. Friess,et al.  Wall insulation measures for residential villas in Dubai: A case study in energy efficiency , 2012 .

[34]  Hiroshi Matsumoto,et al.  A naturally ventilated cavity roof as potential benefits for improving thermal environment and cooli , 2011 .

[35]  R. Lamberts,et al.  Investigation of green roof thermal performance in temperate climate: A case study of an experimenta , 2011 .