In-Plane Mechanical Properties of Birch Plywood

[1]  E. Maawad,et al.  Predicting strength of Finnish birch veneers based on three different failure criteria , 2021, Holzforschung.

[2]  B. Marcon,et al.  Panel Shear of Plywood in Structural Sizes - Assessment Improvement Using Digital Image Correlation , 2021, Experimental Techniques.

[3]  Peter Halbauer,et al.  The Influence of Thickness on the Tensile Strength of Finnish Birch Veneers under Varying Load Angles , 2021 .

[4]  Annette M. Harte,et al.  Review of state of the art of dowel laminated timber members and densified wood materials as sustainable engineered wood products for construction and building applications , 2020 .

[5]  Bhavna Sharma,et al.  Whole timber construction: A state of the art review , 2019, Construction and Building Materials.

[6]  V. Popovska,et al.  Impact of Veneer Layouts on Plywood Tensile Strength , 2017 .

[7]  Keith Crews,et al.  A comparative study of using static and ultrasonic material testing methods to determine the anisotropic material properties of wood , 2016 .

[8]  Frank Lam,et al.  Failure analysis of typical glubam with bidirectional fibers by off-axis tension tests , 2014 .

[9]  H. Yoshihara,et al.  Effect of Specimen Configuration and Lamination Construction on the Measurement of the In-plane Shear Modulus of Plywood Obtained by the Asymmetric Four-point Bending Test , 2013 .

[10]  P. J. García Nieto,et al.  Non-linear numerical analysis of plywood board timber connections by DOE-FEM and full-scale experimental validation , 2013 .

[11]  Hiroshi Yoshihara,et al.  INFLUENCE OF THE SPECIMEN DEPTH TO LENGTH RATIO AND LAMINATION CONSTRUCTION ON YOUNG’S MODULUS AND IN-PLANE SHEAR MODULUS OF PLYWOOD MEASURED BY FLEXURAL VIBRATION , 2012 .

[12]  Ľ.,et al.  NAIL LOADS FOR TRUSS CONNECTIONS USING STEEL VS . FIVE-PLY AND FOUR-PLY FIR AND SPRUCE PLYWOOD GUSSETS , 2011 .

[13]  A. Brunner,et al.  Silviculture of birch (Betula pendula Roth and Betula pubescens Ehrh.) in northern Europe. , 2010 .

[14]  H. Yoshihara.  Poisson's ratio of plywood measured by tension test , 2009 .

[15]  P. Bekhta,et al.  Properties of plywood manufactured from compressed veneer as building material , 2009 .

[16]  José Morais,et al.  Measurement of the shear properties of clear wood by the Arcan test , 2009 .

[17]  Francisco Arriaga-Martitegui,et al.  Characteristic values of the mechanical properties of radiata pine plywood and the derivation of basic values of the layers for a calculation method , 2008 .

[18]  H. Yoshihara,et al.  Shear Stress/Shear Strain Relation of Wood Obtained by Asymmetric Four-Point Bending Test of Side-Tapered Specimen , 2005 .

[19]  Fabrice Pierron,et al.  A comparison between the iosipescu and off-axis shear test methods for the characterization of Pinus Pinaster Ait , 2004 .

[20]  Edmond Saliklis,et al.  CORRELATING OFF-AXIS TENSION TESTS TO SHEAR MODULUS OF WOOD-BASED PANELS , 2000 .

[21]  N. Baldassino,et al.  Determining mechanical properties and main characteristic values of Poplar plywood by medium-sized test pieces , 1998 .

[22]  U. s Dept Agric,et al.  Wood Handbook: Wood As an Engineering Material , 1987 .

[23]  E. M. Wu,et al.  A General Theory of Strength for Anisotropic Materials , 1971 .

[24]  O. Hoffman.  The Brittle Strength of Orthotropic Materials , 1967 .

[25]  Stephen W. Tsai,et al.  Anisotropic strength of composites , 1965 .

[26]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[27]  L. Klein.  Phenolic Resins for Plywood , 1941 .