Biomedical Applications of Biodegradable Polyesters
暂无分享,去创建一个
Ali Fathi | Fariba Dehghani | Iman Manavitehrani | F. Dehghani | Ali Fathi | Hesham Badr | Sean Daly | Ali Negahi Shirazi | I. Manavitehrani | S. Daly | Ali Negahi Shirazi | Hesham Badr
[1] H. Zreiqat,et al. Surface modification of poly(propylene carbonate) by aminolysis and layer-by-layer assembly for enhanced cytocompatibility. , 2012, Colloids and surfaces. B, Biointerfaces.
[2] David Dean,et al. Evaluation of the in vitro cytotoxicity of cross-linked biomaterials. , 2013, Biomacromolecules.
[3] J C Middleton,et al. Synthetic biodegradable polymers as orthopedic devices. , 2000, Biomaterials.
[4] G. Sui,et al. Poly-L-lactic acid/hydroxyapatite hybrid membrane for bone tissue regeneration. , 2007, Journal of biomedical materials research. Part A.
[5] Filippo Causa,et al. Polylactic acid fibre-reinforced polycaprolactone scaffolds for bone tissue engineering. , 2008, Biomaterials.
[6] E. Llorens,et al. Biocompatibility and drug release behavior of scaffolds prepared by coaxial electrospinning of poly(butylene succinate) and polyethylene glycol. , 2015, Materials science & engineering. C, Materials for biological applications.
[7] F. Dehghani,et al. Reinforced Poly(Propylene Carbonate) Composite with Enhanced and Tunable Characteristics, an Alternative for Poly(lactic Acid). , 2015, ACS applied materials & interfaces.
[8] Charlotte K. Williams. Synthesis of functionalized biodegradable polyesters. , 2007, Chemical Society reviews.
[9] P. Supaphol,et al. Electrospun poly(L-lactic acid)/hydroxyapatite composite fibrous scaffolds for bone tissue engineering † , 2009 .
[10] E. Martuscelli,et al. The fractionated crystallization phenomenon in poly(3-hydroxybutyrate)/poly(ethylene oxide) blends , 1993 .
[11] C. Ambrose,et al. In vitro degradation of polymeric networks of poly(propylene fumarate) and the crosslinking macromer poly(propylene fumarate)-diacrylate. , 2003, Biomaterials.
[12] Kristi S. Anseth,et al. Fundamental studies of a novel, biodegradable PEG-b-PLA hydrogel , 2000 .
[13] M. Xiao,et al. Preparation and properties of biodegradable blend containing poly (propylene carbonate) and starch acetate with different degrees of substitution , 2011 .
[14] L. Avérous,et al. Poly(lactic acid): plasticization and properties of biodegradable multiphase systems , 2001 .
[15] C. Kontoyannis,et al. Simultaneous determination of allantoin and glycolic acid in snail mucus and cosmetic creams with high performance liquid chromatography and ultraviolet detection. , 2013, Journal of chromatography. A.
[16] B. Wang,et al. Synthesis and properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/chitin nanocrystals composite scaffolds for tissue engineering , 2014 .
[17] G. Higgins,et al. Polyglycolic acid sutures. Laboratory and clinical evaluation of a new absorbable suture material. , 1970, Archives of surgery.
[18] Qingshan Chen,et al. Cross-linking Characteristics and Mechanical Properties of an Injectable Biomaterial Composed of Polypropylene Fumarate and Polycaprolactone Co-polymer , 2011, Journal of biomaterials science. Polymer edition.
[19] Protein adsorption and smooth muscle cell adhesion on biodegradable agmatine-modified poly(propylene fumarate-co-ethylene glycol) hydrogels. , 2003, Journal of biomedical materials research. Part A.
[20] W. Janvikul,et al. Development of poly(butylene succinate)/calcium phosphate composites for bone engineering , 2014 .
[21] Jiajun Xie,et al. A primary study of poly(propylene fumarate)-2-hydroxyethyl methacrylate copolymer scaffolds for tarsal plate repair and reconstruction in rabbit eyelids. , 2015, Journal of materials chemistry. B.
[22] S. R. Dahl,et al. Determination of γ-hydroxybutyrate (GHB), β-hydroxybutyrate (BHB), pregabalin, 1,4-butane-diol (1,4BD) and γ-butyrolactone (GBL) in whole blood and urine samples by UPLC-MSMS. , 2012, Journal of chromatography. B, Analytical technologies in the biomedical and life sciences.
[23] A. Doğan,et al. Boron containing poly-(lactide-co-glycolide) (PLGA) scaffolds for bone tissue engineering. , 2014, Materials science & engineering. C, Materials for biological applications.
[24] Wei Huang,et al. PHBV microspheres--PLGA matrix composite scaffold for bone tissue engineering. , 2010, Biomaterials.
[25] Kan Wang,et al. Poly(ethylene glycol)-grafted poly(propylene fumarate) networks and parabolic dependence of MC3T3 cell behavior on the network composition. , 2010, Biomaterials.
[26] J. Hao,et al. Semi-interpenetrating networks of bacterial poly(3-hydroxybutyrate) with net-poly(ethylene glycol) , 2001 .
[27] N. Annabi,et al. The effect of elastin on chondrocyte adhesion and proliferation on poly (ɛ-caprolactone)/elastin composites. , 2011, Biomaterials.
[28] Yufeng Zheng,et al. Electrospinning of PLGA/gelatin randomly-oriented and aligned nanofibers as potential scaffold in tissue engineering , 2010 .
[29] Kan Wang,et al. Methacryl-polyhedral oligomeric silsesquioxane as a crosslinker for expediting photo-crosslinking of Poly(propylene fumarate): Material properties and bone cell behavior , 2011 .
[30] P. Bártolo,et al. Production and Characterisation of PCL/ES Scaffolds for Bone Tissue Engineering☆ , 2015 .
[31] Cunxian Song,et al. Injectable thermosensitive hydrogels for intra‐articular delivery of methotrexate , 2011 .
[32] Mei Tu,et al. Fabrication and in vivo osteogenesis of biomimetic poly(propylene carbonate) scaffold with nanofibrous chitosan network in macropores for bone tissue engineering , 2012, Journal of Materials Science: Materials in Medicine.
[33] Xiangfang Peng,et al. Electrospinning Homogeneous Nanofibrous Poly(propylene carbonate)/Gelatin Composite Scaffolds for Tissue Engineering , 2014 .
[34] K. Shakesheff,et al. Polymer carriers for drug delivery in tissue engineering. , 2007, Advanced drug delivery reviews.
[35] Hirenkumar K. Makadia,et al. Poly Lactic-co-Glycolic Acid ( PLGA ) as Biodegradable Controlled Drug Delivery Carrier , 2011 .
[36] S. Bartlett,et al. Reconstruction of the Immature Craniofacial Skeleton With a Carbonated Calcium Phosphate Bone Cement: Interaction With Bioresorbable Mesh , 2003, The Journal of craniofacial surgery.
[37] Jae Sun Yoo,et al. Novel injectable pH and temperature sensitive block copolymer hydrogel. , 2005, Biomacromolecules.
[38] F. Alexis. Factors affecting the degradation and drug-release mechanism of poly(lactic acid) and poly[(lactic acid)-co-(glycolic acid)] , 2005 .
[39] Shanfeng Wang,et al. Injectable and Biodegradable Nanohybrid Polymers with Simultaneously Enhanced Stiffness and Toughness for Bone Repair , 2012 .
[40] J. H. Kim,et al. New application of poly(butylene succinate) (PBS) based ionomer as biopolymer: a role of ion group for hydroxyapatite (HAp) crystal formation , 2009, Journal of Materials Science.
[41] J. Fisher,et al. Synthesis of poly(propylene fumarate) , 2009, Nature Protocols.
[42] Guoqiang Chen,et al. The effect of 3-hydroxybutyrate and its derivatives on the growth of glial cells. , 2007, Biomaterials.
[43] P. Chang,et al. Preparation and properties of biodegradable poly(propylene carbonate)/thermoplastic dried starch composites , 2008 .
[44] D. Day,et al. Fabrication and characterization of poly-(ε)-caprolactone and bioactive glass composites for tissue engineering applications. , 2015, Materials science & engineering. C, Materials for biological applications.
[45] R. Li,et al. Essential work of fracture analysis for starch filled poly(propylene carbonate) composites , 2007 .
[46] N. M. Ranjha,et al. Synthesis and characterization of polycaprolactone/acrylic acid (PCL/AA) hydrogel for controlled drug delivery , 2011 .
[47] Paulo Jorge Da Silva bartolo,et al. Characterisation of PCL and PCL/PLA Scaffolds for Tissue Engineering☆ , 2013 .
[48] Zhiguo Zhao,et al. Antimicrobial Activity of Electrospun Poly(butylenes succinate) Fiber Mats Containing PVP-Capped Silver Nanoparticles , 2013, Applied Biochemistry and Biotechnology.
[49] Geunhyung Kim,et al. Three-dimensional electrospun polycaprolactone (PCL)/alginate hybrid composite scaffolds. , 2014, Carbohydrate polymers.
[50] Lei Cai,et al. Parabolic dependence of material properties and cell behavior on the composition of polymer networks via simultaneously controlling crosslinking density and crystallinity. , 2010, Biomaterials.
[51] Guoping Chen,et al. The influence of structural design of PLGA/collagen hybrid scaffolds in cartilage tissue engineering. , 2010, Biomaterials.
[52] W. Rahman,et al. Applications of Poly(lactic Acid) , 2013 .
[53] Ying Zhang,et al. The use of reactive polymer coatings to facilitate gene delivery from poly (epsilon-caprolactone) scaffolds. , 2009, Biomaterials.
[54] V. B. Konkimalla,et al. Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review. , 2012, Journal of controlled release : official journal of the Controlled Release Society.
[55] Charlotte K. Williams,et al. Ring‐Opening Copolymerization (ROCOP): Synthesis and Properties of Polyesters and Polycarbonates , 2015 .
[56] James M Tour,et al. Rheological behaviour and mechanical characterization of injectable poly(propylene fumarate)/single-walled carbon nanotube composites for bone tissue engineering , 2005, Nanotechnology.
[57] Y. Chao,et al. Co‐encapsulation of Biodegradable Nanoparticles with Silicon Quantum Dots and Quercetin for Monitored Delivery , 2013, Advanced healthcare materials.
[58] E. Jabbari,et al. Cytotoxicity of Paclitaxel in Biodegradable Self-Assembled Core-Shell Poly(Lactide-Co-Glycolide Ethylene Oxide Fumarate) Nanoparticles , 2008, Pharmaceutical Research.
[59] J. Vacanti,et al. A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering. , 2003, Biomaterials.
[60] P. Kohl,et al. Air-channel fabrication for microelectromechanical systems via sacrificial photosensitive polycarbonates , 2003 .
[61] Quan Zhu,et al. Structural characterization and thermal and mechanical properties of poly(propylene carbonate)/MgAl-LDH exfoliation nanocomposite via solution intercalation , 2006 .
[62] Nasim Annabi,et al. Fabrication of porous PCL/elastin composite scaffolds for tissue engineering applications , 2011 .
[63] D. R. Lloyd,et al. Microporous membranes of PLLA/PCL blends for periosteal tissue scaffold , 2013 .
[64] R. Black,et al. PCL-PU composite vascular scaffold production for vascular tissue engineering: attachment, proliferation and bioactivity of human vascular endothelial cells. , 2006, Biomaterials.
[65] Z. Qian,et al. Medical Hypothesis, Discovery &innovation the Peg-pcl-peg Hydrogel as an Implanted Ophthalmic Delivery System after Glaucoma Filtration Surgery; a Pilot Study , 2022 .
[66] S. Tjong,et al. Melt processable and biodegradable aliphatic polycarbonate derived from carbon dioxide and propylene oxide , 2003 .
[67] Q. Fu,et al. Fabrication of well-controlled porous foams of graphene oxide modified poly(propylene-carbonate) using supercritical carbon dioxide and its potential tissue engineering applications , 2013 .
[68] A. Mikos,et al. Cell adhesion on poly(propylene fumarate-co-ethylene glycol) hydrogels. , 2002, Journal of biomedical materials research.
[69] Joseph Stokes,et al. Electrospun composites of PHBV, silk fibroin and nano-hydroxyapatite for bone tissue engineering. , 2013, Materials science & engineering. C, Materials for biological applications.
[70] Suming Li,et al. Hydrolytic degradation of devices based on poly(DL-lactic acid) size-dependence. , 1995, Biomaterials.
[71] Hideomi Koinuma,et al. Copolymerization of carbon dioxide and epoxide , 1969 .
[72] J. Uribe,et al. Failure of polymerized lactic acid tacks in shoulder surgery. , 2003, Journal of shoulder and elbow surgery.
[73] J. Fisher,et al. Photocrosslinking characteristics and mechanical properties of diethyl fumarate/poly(propylene fumarate) biomaterials. , 2002, Biomaterials.
[74] Claudio Migliaresi,et al. Biodegradable fibres of poly(L-lactic acid) produced by melt spinning , 1997 .
[75] E. Jabbari,et al. Gelation and degradation characteristics of in situ photo-crosslinked poly(l-lactide-co-ethylene oxide-co-fumarate) hydrogels , 2007 .
[76] Wei Zhang,et al. Fabrication and in vitro biocompatibility of biomorphic PLGA/nHA composite scaffolds for bone tissue engineering. , 2014, Materials science & engineering. C, Materials for biological applications.
[77] M. Asano,et al. Synthesis of low-molecular-weight copoly(l-lactic acid/ɛ-caprolactone) by direct copolycondensation in the absence of catalysts, and enzymatic degradation of the polymers , 1990 .
[78] Michael P Shaver,et al. Aliphatic polyester polymer stars: synthesis, properties and applications in biomedicine and nanotechnology. , 2011, Chemical Society reviews.
[79] G. Luinstra. Poly(Propylene Carbonate), Old Copolymers of Propylene Oxide and Carbon Dioxide with New Interests: Catalysis and Material Properties , 2008 .
[80] R. Kaushik,et al. Poly-ϵ-caprolactone microspheres and nanospheres: an overview , 2004 .
[81] David P. Martin,et al. Applications of Polyhydroxyalkanoates (PHA) in Medicine and Pharmacy , 2002 .
[82] Martin C. Garnett,et al. Physicochemical Evaluation of Nanoparticles Assembled from Poly(lactic acid)−Poly(ethylene glycol) (PLA−PEG) Block Copolymers as Drug Delivery Vehicles , 2001 .
[83] Swee Hin Teoh,et al. Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo. , 2009, Journal of biomedical materials research. Part A.
[84] Xiamei Zhong,et al. An approach to improve the efficiency of polymerization and enhance biological activity of poly(lactide‐co‐ethylene oxide fumarate) hydrogels , 2014 .
[85] A. Urbanska,et al. Tissue-engineered chitosan/bioactive glass bone scaffolds integrated with PLGA nanoparticles: A therapeutic design for on-demand drug delivery , 2015 .
[86] F. Linde,et al. Tensile and compressive properties of cancellous bone. , 1991, Journal of biomechanics.
[87] Cato T Laurencin,et al. Biomedical Applications of Biodegradable Polymers. , 2011, Journal of polymer science. Part B, Polymer physics.
[88] S. Desobry,et al. Poly-Lactic Acid: Production, Applications, Nanocomposites, and Release Studies. , 2010, Comprehensive reviews in food science and food safety.
[89] Nan Liu,et al. Thermal properties and degradability of poly(propylene carbonate)/poly(β-hydroxybutyrate-co-β-hydroxyvalerate) (PPC/PHBV) blends , 2009 .
[90] H. Baharvand,et al. Preparation and surface characterization of poly-L-lysine-coated PLGA microsphere scaffolds containing retinoic acid for nerve tissue engineering: in vitro study. , 2009, Colloids and surfaces. B, Biointerfaces.
[91] D. Hutmacher,et al. The return of a forgotten polymer : Polycaprolactone in the 21st century , 2009 .
[92] X. Jing,et al. Enzymatic degradation of poly(ε-caprolactone)/poly(dl-lactide) blends in phosphate buffer solution , 1999 .
[93] A. Mikos,et al. Effect of hydrophilicity and agmatine modification on degradation of poly(propylene fumarate-co-ethylene glycol) hydrogels. , 2003, Journal of biomedical materials research. Part A.
[94] M. E. Hoque,et al. Fabrication and characterization of hybrid PCL/PEG 3D scaffolds for potential tissue engineering applications , 2014 .
[95] A. Albertsson,et al. Quantitative determination of degradation products an effective means to study early stages of degradation in linear and branched poly(butylene adipate) and poly(butylene succinate) , 2004 .
[96] M. Prabhakaran,et al. Biocomposite scaffolds for bone regeneration: Role of chitosan and hydroxyapatite within poly-3-hydroxybutyrate-co-3-hydroxyvalerate on mechanical properties and in vitro evaluation. , 2015, Journal of the mechanical behavior of biomedical materials.
[97] Lichun Lu,et al. Bone-tissue-engineering material poly(propylene fumarate): correlation between molecular weight, chain dimensions, and physical properties. , 2006, Biomacromolecules.
[98] PeiYan Ni,et al. Injectable and thermo-sensitive PEG-PCL-PEG copolymer/collagen/n-HA hydrogel composite for guided bone regeneration. , 2012, Biomaterials.
[99] J. Youk,et al. Electrospinning and structural characterization of ultrafine poly(butylene succinate) fibers , 2005 .
[100] Junying Sun,et al. Evaluation of PHBV/calcium silicate composite scaffolds for cartilage tissue engineering , 2014 .
[101] Lih-Sheng Turng,et al. Characterization of thermoplastic polyurethane/polylactic acid (TPU/PLA) tissue engineering scaffolds fabricated by microcellular injection molding. , 2013, Materials science & engineering. C, Materials for biological applications.
[102] W S Pietrzak,et al. Bioabsorbable Polymer Science for the Practicing Surgeon , 1997, The Journal of craniofacial surgery.
[103] I. Hamley,et al. Multiple Sol-Gel Transitions of PEG-PCL-PEG Triblock Copolymer Aqueous Solution. , 2010, Macromolecular rapid communications.
[104] Quanshun Li,et al. Lipase/esterase-catalyzed synthesis of aliphatic polyesters via polycondensation: A review , 2012 .
[105] J. Puiggalí,et al. Synthesis, Properties and Applications of Biodegradable Polymers Derived from Diols and Dicarboxylic Acids: From Polyesters to Poly(ester amide)s , 2014, International journal of molecular sciences.
[106] Gaurav Baranwal,et al. Composite hydrogel of chitosan-poly(hydroxybutyrate-co-valerate) with chondroitin sulfate nanoparticles for nucleus pulposus tissue engineering. , 2015, Colloids and surfaces. B, Biointerfaces.
[107] Wim E Hennink,et al. Preparation and characterization of a three-dimensional printed scaffold based on a functionalized polyester for bone tissue engineering applications. , 2011, Acta biomaterialia.
[108] Lichun Lu,et al. A Biodegradable and Cross-Linkable Multiblock Copolymer Consisting of Poly(propylene fumarate) and Poly(ε-caprolactone): Synthesis, Characterization, and Physical Properties , 2005 .
[109] Finosh G. Thankam,et al. Biosynthetic hydrogels--studies on chemical and physical characteristics on long-term cellular response for tissue engineering. , 2014, Journal of biomedical materials research. Part A.
[110] Antonios G Mikos,et al. Nanoreinforcement of poly(propylene fumarate)-based networks with surface modified alumoxane nanoparticles for bone tissue engineering. , 2004, Biomacromolecules.
[111] Federica Chiellini,et al. Highly porous polycaprolactone-45s5 bioglass? scaffolds for bone tissue engineering , 2010 .
[112] A. Di Rienzo,et al. Thermosensitive block copolymer hydrogels based on poly(ɛ-caprolactone) and polyethylene glycol for biomedical applications: state of the art and future perspectives. , 2015, Journal of biomedical materials research. Part A.
[113] J. Santerre,et al. Biodegradation and in vivo biocompatibility of a degradable, polar/hydrophobic/ionic polyurethane for tissue engineering applications. , 2011, Biomaterials.
[114] C. Laurencin,et al. Biodegradable polymers as biomaterials , 2007 .
[115] Ali P Ebrahimi,et al. Mechanical properties of normal and diseased cerebrovascular system. , 2009, Journal of vascular and interventional neurology.
[116] Antonios G Mikos,et al. Injectable matrices and scaffolds for drug delivery in tissue engineering. , 2007, Advanced drug delivery reviews.
[117] Xiamei Zhong,et al. Fabrication of interpenetrating polymer network to enhance the biological activity of synthetic hydrogels , 2013 .
[118] Aldo R. Boccaccini,et al. Preparation and characterisation of poly(lactide-co-glycolide) (PLGA) and PLGA/Bioglass® composite tubular foam scaffolds for tissue engineering applications , 2005 .
[119] Shih-Jen Chen,et al. Nanotechnology‐based drug delivery treatments and specific targeting therapy for age‐related macular degeneration , 2015, Journal of the Chinese Medical Association : JCMA.
[120] Zhiyi Li,et al. Preparation and characterization of plla composite scaffolds by ScCO2‐induced phase separation , 2012 .
[121] Brian J. Tighe,et al. A review of biodegradable polymers: uses, current developments in the synthesis and characterization of biodegradable polyesters, blends of biodegradable polymers and recent advances in biodegradation studies , 1998 .
[122] S. Gogolewski,et al. Effect of in vivo and in vitro degradation on molecular and mechanical properties of various low-molecular-weight polylactides. , 1997, Journal of biomedical materials research.
[123] I. Vroman,et al. Biodegradable Polymers , 2009, Materials.
[124] Valeria Chiono,et al. An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering , 2014, International journal of molecular sciences.
[125] K. Tajima,et al. Isolation and characterization of Bacillus sp. INT005 accumulating polyhydroxyalkanoate (PHA) from gas field soil. , 2003, Journal of bioscience and bioengineering.
[126] Miqin Zhang,et al. Fabrication and cellular compatibility of aligned chitosan–PCL fibers for nerve tissue regeneration , 2011 .
[127] Pooja Arora,et al. Implant biomaterials: A comprehensive review. , 2015, World journal of clinical cases.
[128] Ekaterina I. Shishatskaya,et al. Results of biomedical investigations of PHB and PHB/PHV fibers , 2003 .
[129] A. Weiss,et al. Elastin based cell-laden injectable hydrogels with tunable gelation, mechanical and biodegradation properties. , 2014, Biomaterials.
[130] T. Emrick,et al. Strategies in aliphatic polyester synthesis for biomaterial and drug delivery applications , 2006 .
[131] J Tessmar,et al. Mediating specific cell adhesion to low-adhesive diblock copolymers by instant modification with cyclic RGD peptides. , 2005, Biomaterials.
[132] A. Steinbüchel,et al. Poly(3-Hydroxybutyrate) Degradation in Ralstonia eutropha H16 Is Mediated Stereoselectively to (S)-3-Hydroxybutyryl Coenzyme A (CoA) via Crotonyl-CoA , 2013, Journal of bacteriology.
[133] Thomas Kissel,et al. Hydrolytic degradation of poly(lactide-co-glycolide) films: effect of oligomers on degradation rate and crystallinity. , 2003, International journal of pharmaceutics.
[134] E. Menaszek,et al. New generation poly(ε-caprolactone)/gel-derived bioactive glass composites for bone tissue engineering: Part I. Material properties. , 2015, Materials science & engineering. C, Materials for biological applications.
[135] John P Fisher,et al. Evaluating changes in structure and cytotoxicity during in vitro degradation of three-dimensional printed scaffolds. , 2015, Tissue engineering. Part A.
[136] A. Mikos,et al. Synthesis and characterization of biodegradable cationic poly(propylene fumarate-co-ethylene glycol) copolymer hydrogels modified with agmatine for enhanced cell adhesion. , 2002, Biomacromolecules.
[137] T. Vermonden,et al. Functional aliphatic polyesters for biomedical and pharmaceutical applications. , 2011, Journal of controlled release : official journal of the Controlled Release Society.
[138] Geunhyung Kim,et al. Electrohydrodynamic direct printing of PCL/collagen fibrous scaffolds with a core/shell structure for tissue engineering applications , 2015 .
[139] Alexander Steinbüchel,et al. Increased diversification of polyhydroxyalkanoates by modification reactions for industrial and medical applications , 2007, Applied Microbiology and Biotechnology.
[140] Xiamei Zhong,et al. Fabrication of biomimetic poly(propylene carbonate) scaffolds by using carbon dioxide as a solvent, monomer and foaming agent , 2012 .
[141] Luca Ceseracciu,et al. Rigid biodegradable photopolymer structures of high resolution using deep-UV laser photocuring , 2011 .
[142] Xiu-li Wang,et al. Synthesis and Properties of Biodegradable Poly(butylene succinate-co-diethylene glycol succinate) Copolymers , 2012 .
[143] M. Nakano,et al. Examination of biodegradability of poly(ethylene carbonate) and poly(propylene carbonate) in the peritoneal cavity in rats. , 1983, Chemical & pharmaceutical bulletin.
[144] Wan Ting Sow,et al. Calcium phosphate coated Keratin-PCL scaffolds for potential bone tissue regeneration. , 2015, Materials science & engineering. C, Materials for biological applications.
[145] Xuesi Chen,et al. Aliphatic poly(ester‐carbonate)s bearing amino groups and its RGD peptide grafting , 2008 .
[146] M. Niaounakis. Medical, Dental, and Pharmaceutical Applications , 2015 .
[147] Yuebin B. Guo,et al. Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance , 2012, Materials.
[148] T. Sheffield,et al. Thermally cross-linked oligo(poly(ethylene glycol) fumarate) hydrogels support osteogenic differentiation of encapsulated marrow stromal cells in vitro. , 2004, Biomacromolecules.
[149] Tae Gwan Park,et al. Degradation of poly(d,l-lactic acid) microspheres: effect of molecular weight , 1994 .
[150] N. Hibino,et al. Reinforced pericardium as a hybrid material for cardiovascular applications. , 2014, Tissue engineering. Part A.
[151] A. Albertsson,et al. In vitro and in vivo degradation profile of aliphatic polyesters subjected to electron beam sterilization. , 2011, Acta biomaterialia.
[152] Y. Ikada,et al. Biodegradable polyesters for medical and ecological applications , 2000 .
[153] X. Jing,et al. Enzymatic degradation of poly(ε-caprolactone) film in phosphate buffer solution containing lipases , 1997 .
[154] M. Khorasani,et al. Nano-hydroxyapatite reinforced polyhydroxybutyrate composites: a comprehensive study on the structural and in vitro biological properties. , 2013, Materials science & engineering. C, Materials for biological applications.
[155] X. Lou,et al. Novel functionalization routes of poly(ε-caprolactone) , 2000 .
[156] Xiamei Zhong,et al. Synthesis of a biodegradable polymer in gas expanded solution: effect of the process on cytocompatibility , 2013 .
[157] Y. Ikada,et al. Properties and morphology of poly(L-lactide). III. Effects of initial crystallinity on long-termin vitro hydrolysis of high molecular weight poly(L-lactide) film in phosphate-buffered solution , 2000 .
[158] Hiroshi Tamura,et al. Fabrication of Chitin/Poly(butylene succinate)/Chondroitin Sulfate Nanoparticles Ternary Composite Hydrogel Scaffold for Skin Tissue Engineering , 2014 .
[159] Amrita,et al. Pullulan-based composite scaffolds for bone tissue engineering: Improved osteoconductivity by pore wall mineralization. , 2015, Carbohydrate polymers.
[160] Fosong Wang,et al. Enhanced mechanical performance of poly(propylene carbonate) via hydrogen bonding interaction with o-lauroyl chitosan , 2011 .
[161] Dowan Kim,et al. Preparation and characterization of poly(propylene carbonate)/exfoliated graphite nanocomposite films with improved thermal stability, mechanical properties and barrier properties , 2013 .
[162] Nicholas J. Carpenter,et al. Effects of Adding Resorbable Phosphate Glass Fibres and PLA to Calcium Phosphate Bone Cements , 2014, Journal of applied biomaterials & functional materials.
[163] A. Salgado,et al. Assessment of the suitability of chitosan/polybutylene succinate scaffolds seeded with mouse mesenchymal progenitor cells for a cartilage tissue engineering approach. , 2008, Tissue engineering. Part A.
[164] Sheryl E. Philip,et al. Poly(3-hydroxybutyrate) multifunctional composite scaffolds for tissue engineering applications. , 2010, Biomaterials.
[165] A. Bonartsev,et al. Biosynthesis, biodegradation, and application of poly(3-hydroxybutyrate) and its copolymers - natural polyesters produced by diazotrophic bacteria , 2007 .
[166] M. Skrifvars,et al. Effect of bioactive extruded PLA/HA composite films on focal adhesion formation of preosteoblastic cells. , 2014, Colloids and surfaces. B, Biointerfaces.
[167] F. Dehghani,et al. Enhancing the mechanical properties and physical stability of biomimetic polymer hydrogels for micro-patterning and tissue engineering applications , 2014 .
[168] Iuliana Spiridon,et al. PLA/chitosan/keratin composites for biomedical applications. , 2014, Materials science & engineering. C, Materials for biological applications.
[169] J. Rieger,et al. Versatile functionalization and grafting of poly(epsilon-caprolactone) by Michael-type addition. , 2005, Chemical communications.
[170] Xinyu Shen,et al. Preparation and characterization of homogeneous chitosan-polylactic acid/hydroxyapatite nanocomposite for bone tissue engineering and evaluation of its mechanical properties. , 2009, Acta biomaterialia.
[171] Robert C. Breithaupt,et al. The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells. , 2011, Biomaterials.
[172] Ziniu Yu,et al. Determination of poly-beta-hydroxybutyric acid in Bacillus thuringiensis by capillary zone electrophoresis with indirect ultraviolet absorbance detection. , 2002, Journal of chromatography. A.
[173] Lih-Sheng Turng,et al. Electrospun aligned poly(propylene carbonate) microfibers with chitosan nanofibers as tissue engineering scaffolds. , 2015, Carbohydrate polymers.
[174] Finosh G. Thankam,et al. Infiltration and sustenance of viability of cells by amphiphilic biosynthetic biodegradable hydrogels , 2014, Journal of Materials Science: Materials in Medicine.
[175] Xiongbiao Chen,et al. Mechanical properties of natural cartilage and tissue-engineered constructs. , 2011, Tissue engineering. Part B, Reviews.
[176] Lei Cai,et al. Poly(ɛ-caprolactone) acrylates synthesized using a facile method for fabricating networks to achieve controllable physicochemical properties and tunable cell responses , 2010 .
[177] Ioannis S Chronakis,et al. Electrospun aliphatic polycarbonates as tailored tissue scaffold materials. , 2007, Biomaterials.
[178] A. Mikos,et al. Injectable biodegradable polymer composites based on poly(propylene fumarate) crosslinked with poly(ethylene glycol)-dimethacrylate. , 2000, Biomaterials.
[179] Jianyong Yu,et al. Mechanical properties of poly(butylene succinate) (PBS) biocomposites reinforced with surface modified jute fibre , 2009 .
[180] Xiamei Zhong,et al. Solvent free synthesis of organometallic catalysts for the copolymerisation of carbon dioxide and propylene oxide , 2010 .
[181] Long Jiang,et al. Biodegradable Polymers and Polymer Blends , 2013 .
[182] Zibiao Li,et al. Towards the development of polycaprolactone based amphiphilic block copolymers: molecular design, self-assembly and biomedical applications. , 2014, Materials science & engineering. C, Materials for biological applications.
[183] M. Vert,et al. In vitro and in vivo degradation of lactic acid-based interference screws used in cruciate ligament reconstruction. , 1999, International journal of biological macromolecules.
[184] Josep A Planell,et al. Mechanical and structural characterisation of completely degradable polylactic acid/calcium phosphate glass scaffolds. , 2007, Biomaterials.
[185] A. Mikos,et al. Crosslinking characteristics of and cell adhesion to an injectable poly(propylene fumarate-co-ethylene glycol) hydrogel using a water-soluble crosslinking system. , 2003, Tissue engineering.
[186] Kamran Ghaedi,et al. Electrospun aligned PLGA and PLGA/gelatin nanofibers embedded with silica nanoparticles for tissue engineering. , 2015, International journal of biological macromolecules.
[187] W. Rahman,et al. Overview of Poly(lactic Acid) , 2013 .
[188] Ralf Gundling,et al. Mechanical Properties of Mesh Materials Used for Hernia Repair and Soft Tissue Augmentation , 2012, PloS one.
[189] Andrea Lazzeri,et al. Polyhydroxyalkanoate (PHA): Review of synthesis, characteristics, processing and potential applications in packaging , 2014 .
[190] A. Schindler,et al. Aliphatic polyesters. I. The degradation of poly(ϵ‐caprolactone) in vivo , 1981 .
[191] Hong Yang,et al. Surface physiological changes induced by lactic acid on pathogens in consideration of pKa and pH , 2014 .
[192] Buddy D. Ratner,et al. Introduction – Biomaterials Science: An Evolving, Multidisciplinary Endeavor , 2013 .
[193] Dongyan Liu,et al. Polylactic acid (PLA)/halloysite nanotube (HNT) composite mats: Influence of HNT content and modification , 2015 .
[194] C. Williams,et al. Bacterial synthesis of biodegradable polyhydroxyalkanoates , 2007, Journal of applied microbiology.
[195] S. Madihally,et al. A multilayered scaffold of a chitosan and gelatin hydrogel supported by a PCL core for cardiac tissue engineering. , 2013, Acta biomaterialia.
[196] E. Díaz,et al. In vitro degradation of Poly(caprolactone)/nHA composites , 2014 .
[197] Bruno Delorme,et al. Osteogenic differentiation of human bone marrow mesenchymal stem cells seeded on melt based chitosan scaffolds for bone tissue engineering applications. , 2009, Biomacromolecules.
[198] Li Lv,et al. Engineering Biosynthesis Mechanisms for Diversifying Polyhydroxyalkanoates. , 2015, Trends in biotechnology.
[199] Rubens Maciel Filho,et al. Poly-lactic acid synthesis for application in biomedical devices - a review. , 2012, Biotechnology advances.
[200] E. Fortunati,et al. Biodegradable polymer matrix nanocomposites for tissue engineering: A review , 2010 .
[201] Y. Kimura,et al. Chapter 1:PLA Synthesis. From the Monomer to the Polymer , 2014 .
[202] T. Volova,et al. A hybrid PHB–hydroxyapatite composite for biomedical application: production, in vitro and in vivo investigation , 2006, Journal of biomaterials science. Polymer edition.
[203] I. Kim,et al. Biological affinity and biodegradability of poly(propylene carbonate) prepared from copolymerization of carbon dioxide with propylene oxide , 2008 .
[204] J. Gardella,et al. In Vitro Hydrolytic Surface Degradation of Poly(glycolic acid): Role of the Surface Segregated Amorphous Region in the Induction Period of Bulk Erosion , 2001 .
[205] Melba Navarro,et al. Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds. , 2014, Materials science & engineering. C, Materials for biological applications.
[206] R. Reis,et al. Chitosan–poly(butylene succinate) scaffolds and human bone marrow stromal cells induce bone repair in a mouse calvaria model , 2012, Journal of tissue engineering and regenerative medicine.
[207] Xuesi Chen,et al. Toughening of poly(propylene carbonate) using rubbery non-isocyanate polyurethane: Transition from brittle to marginally tough , 2014 .
[208] Sung Wan Kim,et al. Caprolactonic poloxamer analog: PEG-PCL-PEG. , 2005, Biomacromolecules.
[209] E. Jabbari,et al. Viscoelastic characterization and modeling of gelation kinetics of injectable in situ cross-linkable poly(lactide-co-ethylene oxide-co-fumarate) hydrogels. , 2007, Biomacromolecules.
[210] C. Rey,et al. Production, by co-grinding in a media mill, of porous biodegradable polylactic acid–apatite composite materials for bone tissue engineering , 2009 .
[211] Chia-Fu Chou,et al. Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering. , 2014, Materials science & engineering. C, Materials for biological applications.
[212] Antonios G Mikos,et al. In vitro cytotoxicity of injectable and biodegradable poly(propylene fumarate)-based networks: unreacted macromers, cross-linked networks, and degradation products. , 2003, Biomacromolecules.
[213] Hyeongjin Lee,et al. Physical and bioactive properties of multi-layered PCL/silica composite scaffolds for bone tissue regeneration , 2014 .
[214] A. Mikos,et al. Synthesis of biodegradable poly(propylene fumarate) networks with poly(propylene fumarate)–diacrylate macromers as crosslinking agents and characterization of their degradation products , 2001 .
[215] Guoping Chen,et al. Osteochondral tissue engineering using a PLGA–collagen hybrid mesh , 2006 .
[216] M. Ehrenfeld,et al. A concept for scaffold-based tissue engineering in alveolar cleft osteoplasty. , 2015, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[217] R. Androsch,et al. In vitro and in vivo studies on blends of isotactic and atactic poly (3-hydroxybutyrate) for development of a dura substitute material. , 2006, Biomaterials.
[218] L. Avérous. Synthesis, Properties, Environmental and Biomedical Applications of Polylactic Acid , 2013 .
[219] H. Deng,et al. A promising alternative to conventional polyethylene with poly(propylene carbonate) reinforced by graphene oxide nanosheets , 2011 .
[220] David A. Cheresh,et al. Apoptosis of adherent cells by recruitment of caspase-8 to unligated integrins , 2001, The Journal of cell biology.
[221] S. Schneider,et al. New Method of Pediatric Cranioplasty for Skull Defect Utilizing Polylactic Acid Absorbable Plates and Carbonated Apatite Bone Cement , 2004, The Journal of craniofacial surgery.
[222] V. Pillay,et al. Enhancement of the biomineralization and cellular adhesivity of polycaprolactone-based hollow porous microspheres via dopamine bio-activation for tissue engineering applications , 2015 .
[223] R. Jerome,et al. Functionalization of poly(ε-caprolactone) by pendant hydroxyl, carboxylic acid and epoxide groups by atom transfer radical addition , 2005 .
[224] Wei Sun,et al. Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro. , 2007, Biomaterials.
[225] Guang Yang,et al. Preparation of Lactic Acid Based Polyurethanes Modified by Castor Oil , 2008 .
[226] S. A. H. Ravandi,et al. Mechanical properties and in vitro degradation of PLGA suture manufactured via electrospinning , 2014, Fibers and Polymers.
[227] A. Zamanian,et al. Investigating composite systems based on poly L-lactide and poly L-lactide/triclosan nanoparticles for tissue engineering and medical applications. , 2016, Materials science & engineering. C, Materials for biological applications.
[228] B. Marí,et al. Hydrolytic and enzymatic degradation of a poly(ε-caprolactone) network , 2012 .
[229] S. Stanzl-Tschegg,et al. Adhesive strength of bone-implant interfaces and in-vivo degradation of PHB composites for load-bearing applications. , 2016, Journal of the mechanical behavior of biomedical materials.
[230] Geunhyung Kim,et al. Electrospun PCL/phlorotannin nanofibres for tissue engineering: physical properties and cellular activities. , 2012, Carbohydrate polymers.
[231] Suming Li,et al. Novel bioresorbable hydrogels prepared from chitosan-graft-polylactide copolymers , 2012 .
[232] Gerrit A. Luinstra,et al. Material Properties of Poly(Propylene Carbonates) , 2011 .
[233] R. Liggins,et al. Paclitaxel loaded poly(L-lactic acid) microspheres: properties of microspheres made with low molecular weight polymers. , 2001, International journal of pharmaceutics.
[234] J. Waszczak,et al. Copper chloride complexes with poly(2-vinylpyridine): preparation and redox properties , 1988 .
[235] V. Coma,et al. Different Pla Grafting Techniques on Chitosan , 2011 .
[236] N. Mishra,et al. Fabrication and characterization of PCL/gelatin composite nanofibrous scaffold for tissue engineering applications by electrospinning method. , 2013, Materials science & engineering. C, Materials for biological applications.
[237] Jian Wang,et al. Multiwall carbon nanotubes/polycaprolactone composites for bone tissue engineering application. , 2012, Colloids and surfaces. B, Biointerfaces.
[238] J. Fisher,et al. Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model. , 2002, Journal of biomedical materials research.
[239] Christophe Detrembleur,et al. Novel Aliphatic Polyesters Based on Functional Cyclic (Di)Esters , 2003 .
[240] Xiao Han,et al. One-pot synthesis of macro-mesoporous bioactive glasses/polylactic acid for bone tissue engineering. , 2014, Materials science & engineering. C, Materials for biological applications.
[241] A. Boccaccini,et al. Multi-functional P(3HB) microsphere/45S5 Bioglass-based composite scaffolds for bone tissue engineering. , 2010, Acta biomaterialia.
[242] Hyoun‐Ee Kim,et al. Sol-gel derived nanoscale bioactive glass (NBG) particles reinforced poly(ε-caprolactone) composites for bone tissue engineering. , 2013, Materials science & engineering. C, Materials for biological applications.
[243] Philippe Lecomte,et al. Recent advances in the synthesis of aliphatic polyesters by ring-opening polymerization. , 2008, Advanced drug delivery reviews.
[244] A. Pietrabissa,et al. Development of tissue-engineered substitutes of the ear ossicles: PORP-shaped poly(propylene fumarate)-based scaffolds cultured with human mesenchymal stromal cells. , 2009, Journal of biomedical materials research. Part A.
[245] D. Bagrov,et al. Biodegradation kinetics of poly(3-hydroxybutyrate)-based biopolymer systems , 2010 .