Ink-Jet Printing of Wax-Based Alumina Suspensions

Suspensions of fine alumina powder in a paraffin wax have been successfully formulated with viscosity values sufficiently low to allow ink-jet printing using a commercial printer. A commercial-grade paraffin wax, with stearylamine and a polyester, were used as the dispersant system. Suspensions with powder loadings up to 40 vol% were passed through the ink-jet printer head. Unfired ceramic bodies with a feature size of <100 μm have been successfully fabricated with waxes that had a powder loading of 30 vol%. The influence of suspension fluid properties on the ink-jet printing process has been studied, and the importance of the acoustic resonance within the ink-jet printing apparatus has been demonstrated.

[1]  C. Tropea,et al.  Droplet-wall collisions: Experimental studies of the deformation and breakup process , 1995 .

[2]  J. Song,et al.  Ultrafine ceramic powder injection moulding: The role of dispersants , 1996 .

[3]  Brian Derby,et al.  Direct ink-jet deposition of ceramic green bodies: I - Formulation of build materials , 1998 .

[4]  Brian Derby,et al.  Ink Jet Deposition of Ceramic Suspensions: Modeling and Experiments of Droplet Formation , 2000 .

[5]  B. Derby,et al.  Ink Jet Printing of PZT Aqueous Ceramic Suspensions , 1999 .

[6]  John Evans,et al.  Microengineering of Ceramics by Direct Ink‐Jet Printing , 1999 .

[7]  S. Chandra,et al.  Parameters controlling solidification of molten wax droplets falling on a solid surface , 1999 .

[8]  Michael J. Cima,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .

[9]  S. Schiaffino,et al.  Molten droplet deposition and solidification at low Weber numbers , 1997 .

[10]  C. E. Slade.  Freeforming Ceramics Using a Thermal Jet Printer , 1998 .

[11]  C. Stow,et al.  An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface , 1981, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[12]  John Evans,et al.  Solid freeforming of ceramics using a drop-on-demand jet printer , 1997 .

[13]  Brian Derby,et al.  Direct inkjet deposition of ceramic green bodies: II - Jet behaviour and deposit formation , 1998 .

[14]  L. Bergström.  Rheological Properties of Concentrated, Nonaqueous Silicon Nitride Suspensions , 1996 .

[15]  J. E. Fromm,et al.  Numerical calculation of the fluid dynamics of drop-on-demand jets , 1984 .