Microstructure and oxidation behavior of a novel bilayer (c-AlPO4–SiCw–mullite)/SiC coating for carbon fiber reinforced CMCs

[1]  Hui‐Ming Cheng,et al.  Long-term oxidation behaviors of C/SiC composites with a SiC/UHTC/SiC three-layer coating in a wide temperature range , 2019, Corrosion Science.

[2]  W. Zhou,et al.  Microstructural evolution of SiC coating on C/C composites exposed to 1500 °C in ambient air , 2019, Ceramics International.

[3]  Y. Long,et al.  Mechanical properties of CVD-SiC coatings with Si impurity , 2018, Ceramics International.

[4]  Liu Guangde,et al.  Oxidation behavior and high-temperature flexural property of CVD-SiC-coated PIP-C/SiC composites , 2018, Ceramics International.

[5]  Yan Jiang,et al.  Microstructure and oxidation behaviors of dense mullite‑silicon carbide‑silicon coating for graphite fabricated by dipping-pyrolysis and reactive infiltration , 2018, Surface and Coatings Technology.

[6]  Rajendran Senthil Kumar,et al.  Sol-infiltrated multilayer SiC/yttrium silicate coatings for imparting enhanced oxidation resistance to C-SiC composites , 2018, Ceramics International.

[7]  Yang Li,et al.  LPCVD-based SiO 2 /SiC multi-layers coating on graphite for improved anti-oxidation at wide-ranged temperatures , 2018, Composites Part B: Engineering.

[8]  Chaobo Huang,et al.  Microstructures and mechanical properties of aligned electrospun carbon nanofibers from binary composites of polyacrylonitrile and polyamic acid , 2018, Journal of Materials Science.

[9]  Y. Xiang,et al.  Mullite whisker toughened mullite coating to enhance the thermal shock resistance of SiC pre-coated carbon/carbon composites , 2017 .

[10]  W. Krenkel,et al.  In-situ growth of SiC nanostructures and their influence on anti-oxidation capability of C/SiC composites , 2017 .

[11]  Zhuan Li,et al.  Oxidation behavior of C/C composites with SiC/ZrSiO 4 –SiO 2 coating , 2017 .

[12]  Ying Wang,et al.  Fabrication and oxidation resistant behavior of plasma sprayed Si/Yb2Si2O7/LaMgAl11O19 coating for Cf/SiC composites at 1673 K , 2017 .

[13]  W. Krenkel,et al.  Fatigue behavior and residual strength evolution of 2.5D C/C-SiC composites , 2016 .

[14]  Jianfeng Huang,et al.  A mullite oxidation protective coating on SiC coated carbon/carbon composites by hot dipping , 2016 .

[15]  W. Krenkel,et al.  Strength evolution of cyclic loaded LSI-based C/C-SiC composites , 2016 .

[16]  Yu Xiaoyu,et al.  Thermal cycling behavior and oxidation resistance of SiC whisker-toughened-mullite/SiC coated carbon/carbon composites in burner rig tests , 2016 .

[17]  Yu Xiaoyu,et al.  Microstructure and oxidation behavior of sol–gel mullite coating on SiC-coated carbon/carbon composites , 2015 .

[18]  H. Cheng,et al.  An integrated composite with a porous C-f/C-ZrB2-SiC core between two compact outer layers of C-f/C-ZrB2-SiC and C-f/C-SiC , 2015 .

[19]  Lai-fei Cheng,et al.  Effect of SiC coating and heat treatment on the thermal radiation properties of C/SiC composites , 2014 .

[20]  Weidong Liu,et al.  Mechanical and oxidation resistance properties of 3D carbon fiber-reinforced mullite matrix composites prepared by sol–gel process , 2014 .

[21]  H. Jianfeng,et al.  Oxidation protective AlPO4 coating for SiC coated carbon/carbon composites for application at 1773 K and 1873 K , 2014 .

[22]  Hui-di Zhou,et al.  Tribological and Thermal Properties of Mullite Coating Prepared by Atmospheric Plasma Spraying , 2014, Journal of Thermal Spray Technology.

[23]  Jianfeng Huang,et al.  Microstructure and oxidation resistance of C-AlPO4–mullite coating prepared by hydrothermal electrophoretic deposition for SiCC/C composites , 2013 .

[24]  Xiaohong Shi,et al.  Mullite Oxidation Resistant Coating for SiC-coated Carbon/Carbon Composites by Supersonic Plasma Spraying , 2013 .

[25]  Lai-fei Cheng,et al.  Polymer-derived yttrium silicate coatings on 2D C/SiC composites , 2013 .

[26]  Ting Yang,et al.  Microstructure and anti-oxidation property of mullite oxidation protective coating prepared by hydrothermal electrophoretic deposition for SiC–C/C composites , 2011 .

[27]  Hejun Li,et al.  Effect of spraying power on microstructure and bonding strength of MoSi2-based coatings prepared by supersonic plasma spraying , 2011 .

[28]  Fei Deng,et al.  The effect of zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame , 2011 .

[29]  Lai-fei Cheng,et al.  The Oxidation Behavior of SiC–ZrC–SiC-Coated C/SiC Minicomposites at Ultrahigh Temperatures , 2010 .

[30]  Lai-fei Cheng,et al.  Preparation and oxidation protection of CVD SiC/a-BC/SiC coatings for 3D C/SiC composites , 2009 .

[31]  Hongbo Zhang,et al.  Oxidation behavior of oxidation protective coatings for C/C-SiC composites at 1 500 °C , 2009 .

[32]  Li Kezhi,et al.  A SiC whisker-toughened SiC-CrSi2 oxidation protective coating for carbon/carbon composites , 2007 .

[33]  Shi Xiaohong,et al.  Microstructure and anti-oxidation property of CrSi2–SiC coating for carbon/carbon composites , 2006 .

[34]  Xiaohong Shi,et al.  SiC whisker-toughened SiC oxidation protective coating for carbon/carbon composites , 2006 .

[35]  M. Ferraris,et al.  Cordierite–mullite coating for SiCf/SiC composites , 2002 .

[36]  V. Sarin,et al.  Structure and high-temperature stability of compositionally graded CVD mullite coatings , 2001 .

[37]  V. Sarin,et al.  The development of CVD mullite coatings for high temperature corrosive applications , 1997 .