Light-harvesting multi-walled carbon nanotubes and CdS hybrids: Application to photocatalytic hydrogen production from water

This study reports the synthesis and surface characterization of multi-walled carbon nanotubes (CNT), CdS, and metal catalyst (M) hybrids (CdS/CNT/M), and their novel application to photocatalytic hydrogen production under visible light (λ > 400 nm) in the presence of electron donor (Na2S and Na2SO3). In the binary hybrids between CNT and CdS (CdS/CNT) the CNT annealed at 500 °C (h-CNT) has the larger amount of hydrogen production than crude (c-CNT) or acid-treated CNT (a-CNT) due to highly improved purity and suitable work function. When hybridized with CdS and M, however, a-CNT has the largest amount of hydrogen production (a-CNT > h-CNT > c-CNT) even though all the CNTs have similar functional groups for binding metal catalyst on their surfaces. Photocurrent measurements also indicated that CdS/a-CNT/Pt ternary generates a higher photocurrent than that of CdS/a-CNT binary (ternary > binary > CdS alone). In such ternary hybrids, Pt, Ni, and Ru are found to be effective in catalyzing proton/water but other metals (Pd, Au, Ag, Cu) showed very low activities with the following order: Pt > Ni > Ru > Pd > Au > Ag > Cu. The enhanced hydrogen production in the binary and ternary hybrids is ascribed partially to suitably positioned work functions among the hybrid components and thereby vectorial charge transfer through the work function energy gradient. Detailed surface studies were also described using Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM).

[1]  F. Du,et al.  Nitrogen-Doped Carbon Nanotube Arrays with High Electrocatalytic Activity for Oxygen Reduction , 2009, Science.

[2]  Franco Cacialli,et al.  Oxidised carbon nanotubes as solution processable, high work function hole-extraction layers for organic solar cells , 2009 .

[3]  W. Choi,et al.  Photoelectrochemical Investigation on Electron Transfer Mediating Behaviors of Polyoxometalate in UV-Illuminated Suspensions of TiO2 and Pt/TiO2 , 2003 .

[4]  Quan-hong Yang,et al.  Multi-step purification of carbon nanotubes , 2002 .

[5]  C. R. Martin,et al.  Metal-Nanocluster-Filled Carbon Nanotubes: Catalytic Properties and Possible Applications in Electrochemical Energy Storage and Production , 1999 .

[6]  Elizabeth C. Dickey,et al.  PURIFICATION AND STRUCTURAL ANNEALING OF MULTIWALLED CARBON NANOTUBES AT GRAPHITIZATION TEMPERATURES , 2001 .

[7]  Anusorn Kongkanand,et al.  Electron storage in single wall carbon nanotubes. Fermi level equilibration in semiconductor-SWCNT suspensions. , 2007, ACS nano.

[8]  P. Collins,et al.  Identifying and counting point defects in carbon nanotubes , 2005, Nature materials.

[9]  Wei Xia,et al.  Surface characterization of oxygen-functionalized multi-walled carbon nanotubes by high-resolution X-ray photoelectron spectroscopy and temperature-programmed desorption , 2007 .

[10]  I. Willner,et al.  Efficient generation of photocurrents by using CdS/carbon nanotube assemblies on electrodes. , 2004, Angewandte Chemie.

[11]  M. Prato,et al.  Carbon nanotubes in electron donor-acceptor nanocomposites. , 2005, Accounts of chemical research.

[12]  S. Hotchandani,et al.  Single-Wall Carbon Nanotube Films for Photocurrent Generation. A Prompt Response to Visible-Light Irradiation , 2004 .

[13]  Edward Sacher,et al.  Functionalization of multiwalled carbon nanotubes by mild aqueous sonication. , 2005, The journal of physical chemistry. B.

[14]  Franco Cacialli,et al.  Work Functions and Surface Functional Groups of Multiwall Carbon Nanotubes , 1999 .

[15]  J. Justin Gooding,et al.  Nanostructuring electrodes with carbon nanotubes: A review on electrochemistry and applications for sensing , 2005 .

[16]  Anusorn Kongkanand,et al.  Single wall carbon nanotube scaffolds for photoelectrochemical solar cells. Capture and transport of photogenerated electrons. , 2007, Nano letters.

[17]  S. Fukuzumi,et al.  Stacked-cup carbon nanotubes for photoelectrochemical solar cells. , 2006, Angewandte Chemie.

[18]  S. Xie,et al.  Raman characterization of aligned carbon nanotubes produced by thermal decomposition of hydrocarbon vapor , 1997 .

[19]  W. Sigmund,et al.  Photocatalytic Carbon‐Nanotube–TiO2 Composites , 2009 .

[20]  T. Lee,et al.  Photocatalytic Production of H2 on Nanocomposite Catalysts , 2007 .

[21]  B. Liang,et al.  Oxygen Functionalization of Multiwall Carbon Nanotubes by Microwave-Excited Surface-Wave Plasma Treatment , 2009 .

[22]  S. R. P. Silva,et al.  Tuning the work function of surface oxidised multi-wall carbon nanotubes via cation exchange , 2007 .

[23]  Ji Liang,et al.  X-ray diffraction characterization on the alignment degree of carbon nanotubes , 2001 .

[24]  M. Shiraishi,et al.  Work function of carbon nanotubes , 2001 .

[25]  Hu-lin Li,et al.  Self-assembly of palladium nanoparticles on functional multi-walled carbon nanotubes for formaldehyde oxidation , 2009 .

[26]  Araceli Rodríguez,et al.  Multiwalled Carbon Nanotubes for Liquid-Phase Oxidation. Functionalization, Characterization, and Catalytic Activity , 2006 .

[27]  M. Jackson,et al.  Chemically functionalized carbon nanotubes and their characterization using thermogravimetric analysis, fourier transform infrared, and raman spectroscopy , 2006 .

[28]  Ying Yu,et al.  Preparation of multi-walled carbon nanotube supported TiO2 and its photocatalytic activity in the reduction of CO2 with H2O , 2007 .

[29]  Richard M. Lueptow,et al.  Photoreactive TiO2/carbon nanotube composites: synthesis and reactivity. , 2008, Environmental science & technology.

[30]  Leong Ming Gan,et al.  Preparation and characterization of platinum-based electrocatalysts on multiwalled carbon nanotubes for proton exchange membrane fuel cells , 2002 .

[31]  James Alastair McLaughlin,et al.  High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs , 2005 .

[32]  Sang Kyoo Lim,et al.  Preparation of TiO2-embedded carbon nanofibers and their photocatalytic activity in the oxidation of gaseous acetaldehyde , 2008 .

[33]  P. Kamat,et al.  Single‐Walled Carbon Nanotube–CdS Nanocomposites as Light‐Harvesting Assemblies: Photoinduced Charge‐Transfer Interactions , 2005 .

[34]  James Alastair McLaughlin,et al.  Sputter deposition of highly dispersed platinum nanoparticles on carbon nanotube arrays for fuel cell electrode material , 2010 .

[35]  Christopher Matranga,et al.  Trapped CO2 in Carbon Nanotube Bundles , 2003 .

[36]  Douglas R. Kauffman,et al.  Carbon nanotube gas and vapor sensors. , 2008, Angewandte Chemie.

[37]  P. Karandikar,et al.  Carbon Nanotube (CNT) and Carbon Fiber Reinforced High Toughness Reaction Bonded Composites , 2009 .

[38]  Hyunwoong Park,et al.  Effects of the preparation method of the ternary CdS/TiO2/Pt hybrid photocatalysts on visible light-induced hydrogen production , 2008 .

[39]  Richard G Compton,et al.  Metal nanoparticles and related materials supported on carbon nanotubes: methods and applications. , 2006, Small.

[40]  E. Ruckenstein,et al.  Applicability of Dubinin–Astakhov equation to CO2 adsorption on single-walled carbon nanotubes , 2006 .

[41]  Wei Xia,et al.  Thermal Stability and Reducibility of Oxygen-Containing Functional Groups on Multiwalled Carbon Nanotube Surfaces: A Quantitative High-Resolution XPS and TPD/TPR Study , 2008 .