Adhesive strength and micromechanics of wood bonded at low temperature

[1]  R. Mitter,et al.  Technological performance of formaldehyde-free adhesive alternatives for particleboard industry , 2019, International Journal of Adhesion and Adhesives.

[2]  C. Hunt,et al.  Understanding Wood Bonds–Going Beyond What Meets the Eye: A Critical Review , 2018, Progress in Adhesion and Adhesives.

[3]  M. Birkett,et al.  Low temperature tensile lap-shear testing of adhesively bonded polyethylene pipe , 2017 .

[4]  O. Hagman,et al.  Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives , 2015, European Journal of Wood and Wood Products.

[5]  P. Bekhta,et al.  Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer , 2014 .

[6]  Anastasios P. Vassilopoulos,et al.  Early-age tensile properties of structural epoxy adhesives subjected to low-temperature curing , 2012 .

[7]  Anastasios P. Vassilopoulos,et al.  Effects of low-temperature curing on physical behavior of cold-curing epoxy adhesives in bridge construction , 2012 .

[8]  A. Jäger,et al.  Identification of stiffness tensor components of wood cell walls by means of nanoindentation , 2011 .

[9]  U. Müller,et al.  Elastic Properties of Adhesive Polymers. III. Adhesive Polymer Films Under Dry and Wet Conditions Characterized by Means of Nanoindentation , 2010 .

[10]  Michael Schmidt,et al.  Verklebung von Buchenholz für tragende Holzbauteile , 2010, European Journal of Wood and Wood Products.

[11]  Charles R. Frihart,et al.  Adhesive Groups and How They Relate to the Durability of Bonded Wood , 2009 .

[12]  F. Kamke,et al.  Penetration of Liquid Urea-Formaldehyde Adhesive into Beech Wood , 2007 .

[13]  Seung‐Hwan Lee,et al.  Adhesive penetration of wood cell walls investigated by scanning thermal microscopy (SThM) , 2007 .

[14]  W. Gindl,et al.  Mechanical characterisation of wood-adhesive interphase cell walls by nanoindentation , 2006 .

[15]  U. Müller,et al.  Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf- and lap joint testing method , 2006, Holz als Roh- und Werkstoff.

[16]  Ulrich Müller,et al.  Direct measurement of strain distribution along a wood bond line. Part 2: Effects of adhesive penetration on strain distribution , 2005 .

[17]  P. Fratzl,et al.  Mechanical properties of spruce wood cell walls by nanoindentation , 2004 .

[18]  S. Stanzl-Tschegg,et al.  Effects of surface ageing on wettability, surface chemistry, and adhesion of wood , 2004, Holz als Roh- und Werkstoff.

[19]  W. Gindl,et al.  Cell-wall hardness and Young's modulus of melamine-modified spruce wood by nano-indentation , 2002 .

[20]  R. Wimmer,et al.  Using UV-Microscopy to Study Diffusion of Melamine-Urea-Formaldehyde Resin in Cell Walls of Spruce Wood , 2002 .

[21]  Michael A. Ritter,et al.  EFFECT OF COLD TEMPERATURES ON STRESS-LAMINATED TIMBER BRIDGE DECKS , 1998 .

[22]  John F. Siau,et al.  Wood--influence of moisture on physical properties , 1995 .

[23]  F. Kamke,et al.  Quantitative Analysis of Gross Adhesive Penetration in Wood Using Fluorescence Microscopy , 1992 .

[24]  M. Irle,et al.  Physical Aspects of Wood Adhesive Bond Formation with Formaldehyde Based Adhesives Part I. The Effect of Curing Conditions on the Physical Properties of Urea Formaldehyde Films , 1987 .

[25]  W. Cǒté,et al.  Principles of Wood Science and Technology: I Solid Wood , 1977 .