Improved mechanical properties of Cu8Ni4Sn alloy as functionally graded composites with preserving its thermal and electrical properties

[1]  M. Zawrah,et al.  Recycling of aluminum dross and silica fume wastes for production of mullite-containing ceramics: Powder preparation, sinterability and properties , 2022, Ceramics International.

[2]  M. Taha,et al.  Tribo-mechanical measurements and in vivo performance of zirconia-containing biphasic calcium phosphate material implanted in a rat model for bone replacement applications , 2022, Materials Chemistry and Physics.

[3]  E. M. Ahmed,et al.  Characterization and performance evaluation of Cu-based/TiO2 nano composites , 2022, Scientific Reports.

[4]  D. Ramírez-Vinasco,et al.  Compressibility behaviour of conventional AlN-Cu mixtures and Cu-(AlN-Cu) composite powder mixtures , 2022, Powder Technology.

[5]  M. Zawrah,et al.  Fabrication of Al/Al2O3/ SiC/graphene hybrid nanocomposites from Al-dross by powder metallurgy: Sinterability, mechanical and electrical properties , 2022, Ceramics International.

[6]  M. Taha,et al.  Evaluation of the electrical and dielectric behavior of the apatite layer formed on the surface of hydroxyapatite/hardystonite/copper oxide hybrid nanocomposites for bone repair applications , 2022, Ceramics International.

[7]  T. Larionova,et al.  Thermal Conductivity of Composite Materials Copper-Fullerene Soot , 2022, Materials.

[8]  M. Taha,et al.  Improvement of the microstructure and mechanical properties by hybridizing the surface of AA7075 by hexagonal boron nitride with carbide particles using the FSP process , 2022, Journal of Materials Research and Technology.

[9]  Mashhour A. Alazwari,et al.  Influence of Friction Stir Process on the Physical, Microstructural, Corrosive, and Electrical Properties of an Al–Mg Alloy Modified with Ti–B Additives , 2022, Materials.

[10]  M. Taha,et al.  Effects of metastable θ′ precipitates on the strengthening, wear and electrical behaviors of Al 2519-SiC/fly ash hybrid nanocomposites synthesized by powder metallurgy technique , 2022, Silicon.

[11]  N. Radhika,et al.  Evolution of Microstructure and Mechanical properties of [Cu–10Ni]–Si3N4 Nanocomposites developed using Mechanical Alloying and Spark Plasma Sintering , 2021, Journal of Alloys and Compounds.

[12]  Ayshah S. Alatawi,et al.  Improved toughness, electrical conductivity and optical properties of bioactive borosilicate glasses for orthopedic applications , 2021, Applied Physics A.

[13]  Üsame Ali Usca,et al.  Investigation on microstructure, mechanical, and tribological performance of Cu base hybrid composite materials , 2021, Journal of Materials Research and Technology.

[14]  Q. Lei,et al.  Microstructure and properties of Cu-TiNi composites prepared by vacuum hot pressing , 2021, Journal of Alloys and Compounds.

[15]  M. Ismail,et al.  Thermal Conductivity of Copper Matrix Composites Reinforced with Multi-wall Carbon Nanotubes , 2021, Journal of Physics: Conference Series.

[16]  Y. Mazaheri,et al.  Improving mechanical and tribological performances of pure copper matrix surface composites reinforced by Ti2AlC MAX phase and MoS2 nanoparticles , 2021 .

[17]  Essam B. Moustafa,et al.  Evaluation of the Dynamic Behavior, Elastic Properties, and in Vitro Bioactivity of Some Borophosphosilicate Glasses for Orthopedic Applications , 2021, Journal of Non-Crystalline Solids.

[18]  M. Taha,et al.  A Study to Evaluate the Bioactivity Behavior and Electrical Properties of Hydroxyapatite/Ag2O-Borosilicate Glass Nanocomposites for Biomedical Applications , 2021, Journal of Inorganic and Organometallic Polymers and Materials.

[19]  Essam B. Moustafa,et al.  Role of hybrid nanoparticles on thermal, electrical conductivity, microstructure, and hardness behavior of nanocomposite matrix , 2021, Journal of Materials Research and Technology.

[20]  M. Taha,et al.  Review on Using Powder Metallurgy Method for Production of Metal-Based Nanocomposites , 2021, Egyptian Journal of Chemistry.

[21]  Taha,et al.  Mechanical and Electrical Properties of Nano Al-Matrix Composites Reinforced with SiC and Prepared by Powder Metallurgy , 2021, Biointerface Research in Applied Chemistry.

[22]  M. Taha,et al.  The Effect of Different Fly Ash and Vanadium Carbide Contents on the Various Properties of Hypereutectic Al-Si Alloys-Based Hybrid Nanocomposites , 2021, Silicon.

[23]  H. Abomostafa,et al.  Synthesis, Structural and Biomedical Characterization of Hydroxyapatite/Borosilicate Bioactive Glass Nanocomposites , 2021, Journal of Inorganic and Organometallic Polymers and Materials.

[24]  V. Senthilkumar,et al.  Effect of SiC on Mechanical and Microstructural Characteristics of Al Based Functionally Graded Material , 2021, Silicon.

[25]  J. Hernández-Saz,et al.  Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing , 2021 .

[26]  E. Bucharsky,et al.  Developing a hybrid Al–SiC-graphite functionally graded composite material for optimum composition and mechanical properties , 2020 .

[27]  M. Fattahi,et al.  Formation mechanism for synthesis of Ti3SnC2 MAX phase , 2020 .

[28]  M. Taha,et al.  Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying , 2020, International Journal of Minerals, Metallurgy and Materials.

[29]  B. Trindade,et al.  In-situ development of Fe3C and TiC reinforcements during the mechanosynthesis of Cu–10Sn–15Ti/diamonds composite powders by high energy ball milling: Microstructural, thermal, and mechanical characterization , 2020 .

[30]  M. Radovic,et al.  Effects of Al substitution with Si and Sn on tribological performance of Ti3AlC2 , 2020 .

[31]  M. Ibrahim,et al.  Biocompatibility, physico-chemical and mechanical properties of hydroxyapatite-based silicon dioxide nanocomposites for biomedical applications , 2020 .

[32]  Rajeev Agrawal,et al.  Microstructural, tribological and compression behaviour of Copper matrix reinforced with Graphite-SiC hybrid composites , 2020 .

[33]  Ravi Potluri,et al.  Microstructural, mechanical and tribological characterization on the Al based functionally graded material fabricated powder metallurgy , 2020 .

[34]  H. Kim,et al.  Enhanced tensile properties and electrical conductivity of Cu-CNT nanocomposites processed via the combination of flake powder metallurgy and high pressure torsion methods , 2020 .

[35]  Ping Liu,et al.  Preparation of CNTs/Cu composites with good electrical conductivity and excellent mechanical properties , 2020 .

[36]  M. Ibrahim,et al.  In vitro bioactivity, molecular structure and mechanical properties of zirconia-carbonated hydroxyapatite nanobiocomposites sintered at different temperatures , 2020 .

[37]  V. Senthil,et al.  Influence of B4C nanoparticles on mechanical behaviour of Silicon brass nanocomposite through mechanical alloying and hot pressing , 2019, Ceramics International.

[38]  R. Kadoli,et al.  Powder metallurgy process towards functional gradation of Al-Al2O3 metal ceramic mixture samples , 2019, IOP Conference Series: Materials Science and Engineering.

[39]  D. Ağaoğulları.  Effects of ZrC content and mechanical alloying on the microstructural and mechanical properties of hypoeutectic Al-7 wt.% Si composites prepared by spark plasma sintering , 2019, Ceramics International.

[40]  X. Qu,et al.  Fabrication, mechanical properties and electrical conductivity of Al2O3 reinforced Cu/CNTs composites , 2019, Journal of Alloys and Compounds.

[41]  Yumin Zhang,et al.  Strengthening mechanisms based on reinforcement distribution uniformity for particle reinforced aluminum matrix composites , 2018, Transactions of Nonferrous Metals Society of China.

[42]  K. Sugio,et al.  Evaluation of Effective Thermal Conductivity of Metal Matrix Composites by Using Image-Based Calculation , 2018, Materials Science Forum.

[43]  M. Ibrahim,et al.  Influence of the addition of carbonated hydroxyapatite and selenium dioxide on mechanical properties and in vitro bioactivity of borosilicate inert glass , 2018, Ceramics International.

[44]  N. Radhika,et al.  Fabrication of Cu-Sn/SiC Metal Matrix Composites and Investigation of its Mechanical and Dry Sliding Wear Properties , 2018 .

[45]  M. Ibrahim,et al.  Effect of sintering temperatures on the in vitro bioactivity, molecular structure and mechanical properties of titanium/carbonated hydroxyapatite nanobiocomposites , 2017 .

[46]  M. Chmielewski,et al.  Microstructure and thermal properties of Cu-SiC composite materials depending on the sintering technique , 2017 .

[47]  M. Elmahdy,et al.  Microstructure and Properties of Cu-ZrO2 Nanocomposites Synthesized by in Situ Processing , 2017 .

[48]  S. Reich,et al.  Composites of aluminum alloy and magnesium alloy with graphite showing low thermal expansion and high specific thermal conductivity , 2017, Science and technology of advanced materials.

[49]  Abdulaziz S. Alaboodi,et al.  Strengthening Mechanisms on (Cu–10Zn)100−x–x wt% Al2O3 (x = 0, 3, 6, 9 and 12) Nanocomposites Prepared by Mechanical Alloying and Vacuum Hot Pressing: Influence of Reinforcement Content , 2017, Transactions of the Indian Institute of Metals.

[50]  D. Chaira,et al.  Effect of Graphite and SiC Addition into Cu and SiC Particle Size Effect on Fabrication of Cu–Graphite–SiC MMC by Powder Metallurgy , 2017, Transactions of the Indian Institute of Metals.

[51]  P. Abachi,et al.  Preparation of in-situ Cu/NbC nanocomposite and its functionally graded behavior for electrical contact applications , 2015 .

[52]  W. Poole,et al.  Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles , 2009 .

[53]  J. M. Coulson,et al.  Heat Transfer , 2018, Finite Element Method for Solids and Structures.