A Plug-and-Play Monitoring and Control Architecture for Disturbance Compensation in Rolling Mills

In modern industrial processes, production quality, system performance, process reliability, and safety issues have received considerable attention. This paper proposes a plug-and-play (PnP) monitoring and control architecture that results in a simple reliable design procedure. The proposed PnP architecture is integrated with process monitoring and control systems, by which system performance can be enhanced without modifying or replacing the existing control system. Based on the proposed PnP architecture, a PnP process monitoring and disturbance compensation for rolling mills is proposed. The performance and effectiveness of the proposed approach is demonstrated using an industrial rolling mill benchmark.

[1]  A. Morse.  Supervisory control of families of linear set-point controllers , 1993, Proceedings of 32nd IEEE Conference on Decision and Control.

[2]  Steven X. Ding,et al.  A New Soft-Sensor-Based Process Monitoring Scheme Incorporating Infrequent KPI Measurements , 2015, IEEE Transactions on Industrial Electronics.

[3]  Derong Liu,et al.  Networked Control Systems: Theory and Applications , 2008 .

[4]  Richard D. Braatz,et al.  Fault Detection and Diagnosis in Industrial Systems , 2001 .

[5]  Bruce A. Francis,et al.  A course in H [infinity] control theory , 1987 .

[6]  A. Morse.  Supervisory control of families of linear set-point controllers Part I. Exact matching , 1996, IEEE Trans. Autom. Control..

[7]  Marcello Farina,et al.  Plug-and-Play Decentralized Model Predictive Control for Linear Systems , 2013, IEEE Transactions on Automatic Control.

[8]  Mohieddine Jelali,et al.  An overview of control performance assessment technology and industrial applications , 2006 .

[9]  Marco Sorrentino,et al.  A Model-Based Key Performance Index for Energy Assessment and Monitoring of Telecommunication Cooling Systems , 2014, IEEE Transactions on Sustainable Energy.

[10]  A. Liegeois,et al.  Automatic supervisory control of the configuration and behavior of multi-body mechanisms , 1977 .

[11]  Steven X. Ding,et al.  Model-based Fault Diagnosis Techniques: Design Schemes, Algorithms, and Tools , 2008 .

[12]  Aidan O'Dwyer,et al.  Handbook of PI and PID controller tuning rules , 2003 .

[13]  T. Georgiou,et al.  Optimal robustness in the gap metric , 1989, Proceedings of the 28th IEEE Conference on Decision and Control,.

[14]  Steven X. Ding,et al.  Data-driven design of monitoring and diagnosis systems for dynamic processes: A review of subspace technique based schemes and some recent results , 2014 .

[15]  S. Joe Qin,et al.  Control performance monitoring — a review and assessment , 1998 .

[16]  Kaixiang Peng,et al.  Online Monitoring System Design for Roll Eccentricity in Rolling Mills , 2016, IEEE Transactions on Industrial Electronics.

[17]  Okyay Kaynak,et al.  Improved PLS Focused on Key-Performance-Indicator-Related Fault Diagnosis , 2015, IEEE Transactions on Industrial Electronics.

[18]  Steven X. Ding,et al.  Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems , 2014 .

[19]  Youmin Zhang,et al.  Integrated active fault-tolerant control using IMM approach , 2001 .

[20]  Steven X. Ding,et al.  Real-Time Implementation of Fault-Tolerant Control Systems With Performance Optimization , 2014, IEEE Transactions on Industrial Electronics.

[21]  Yong Zhang,et al.  Data-driven realizations of kernel and image representations and their application to fault detection and control system design , 2014, Autom..

[22]  Huijun Gao,et al.  Vibration Isolation for Active Suspensions With Performance Constraints and Actuator Saturation , 2015, IEEE/ASME Transactions on Mechatronics.

[23]  Shen Yin,et al.  Performance Monitoring for Vehicle Suspension System via Fuzzy Positivistic C-Means Clustering Based on Accelerometer Measurements , 2015, IEEE/ASME Transactions on Mechatronics.

[24]  Biao Huang,et al.  Dynamic Modeling, Predictive Control and Performance Monitoring: A Data-driven Subspace Approach , 2008 .

[25]  Hamid Reza Karimi,et al.  Residual Generator-Based Controller Design via Process Measurements , 2014 .

[26]  Klaus-Dieter Thoben,et al.  Integration of supply networks for customization with modularity in cloud and make-to-upgrade strategy , 2013 .

[27]  Gang Tao,et al.  Adaptive Control Design and Analysis , 2003 .

[28]  Stephen J. Wright,et al.  Numerical Optimization , 2018, Fundamental Statistical Inference.

[29]  Inseok Hwang,et al.  A Survey of Fault Detection, Isolation, and Reconfiguration Methods , 2010, IEEE Transactions on Control Systems Technology.

[30]  Jakob Stoustrup,et al.  Plug & play control: Control technology towards new challenges , 2009, 2009 European Control Conference (ECC).

[31]  Jianbin Qiu,et al.  Descriptor reduced-order sliding mode observers design for switched systems with sensor and actuator faults , 2017, Autom..

[32]  J. Doyle,et al.  Robust and optimal control , 1995, Proceedings of 35th IEEE Conference on Decision and Control.

[33]  Jan Dimon Bendtsen,et al.  Plug-and-Play Control—Modifying Control Systems Online , 2013, IEEE Transactions on Control Systems Technology.