The authors report significant progress on infrared (IR) focal plane array (FPA) imaging signal processing circuits, built in NbN and operating at 10 K. The improvements to our NbN process are highlighted by the introduction of directly grounded junctions (DGJ). These DGJs substantially reduce parasitic inductance thereby compensating for the high sheet inductance of NbN films. The circuits being developed include a 16-bit SFQ counting ADC and several digital signal processing (DSP) units. We report test results of greatly improved ADC performance, which is the result of both improved designs and fabrication techniques. Signal processing units on individual chips have been designed, fabricated, and tested. They perform functions such as background subtraction, gain and responsivity correction, and data reduction. We report test results of the DSP chips performing these functions. Ultimately, these chips will be integrated on a multi-chip-module (MCM) with high bandwidth, low impedance interconnects and integrated with an IR focal plane array sensor.
[2]
L.A. Abelson,et al.
Superconductive multi-chip module process for high speed digital applications
,
1997,
IEEE Transactions on Applied Superconductivity.
[3]
G. Akerling,et al.
Robust superconducting die attach process
,
1997,
IEEE Transactions on Applied Superconductivity.
[4]
E. Ladizinsky,et al.
Characteristics of junctions and resistors fabricated using an all-NbN superconductor integrated circuit foundry process
,
1999,
IEEE Transactions on Applied Superconductivity.
[5]
D. Durand,et al.
NbN circuits and packaging for 10 Kelvin IR focal plane array sensor signal processing
,
1999,
IEEE Transactions on Applied Superconductivity.
[6]
A multiple pin, flip-chip system for microwave and gigabit per second cryogenic device testing at variable temperatures
,
2001
.