Immersion frying for the thermal drying of sewage sludge: an economic assessment.

This paper presents an economic study of a novel thermal fry-drying technology which transforms sewage sludge and recycled cooking oil (RCO) into a solid fuel. The process is shown to have significant potential advantage in terms of capital costs (by factors of several times) and comparable operating costs. Three potential variants of the process have been simulated and costed in terms of both capital and operating requirements for a commercial scale of operation. The differences are in the energy recovery systems, which include a simple condensation of the evaporated water and two different heat pump configurations. Simple condensation provides the simplest process, but the energy efficiency gain of an open heat pump offset this, making it economically somewhat more attractive. In terms of operating costs, current sludge dryers are dominated by maintenance and energy requirements, while for fry-drying these are comparatively small. Fry-drying running costs are dominated by provision of makeup waste oil. Cost reduction could focus on cheaper waste oil, e.g. from grease trap waste.

[1]  P. Lowe,et al.  Developments in the Thermal Drying of Sewage Sludge , 1995 .

[2]  K. Hanaki,et al.  Identification and quantification of sulfur and nitrogen containing odorous compounds in wastewater , 1995 .

[3]  Comparison of the Peng−Robinson and Soave−Redlich−Kwong Equations of State Using a New Zero-Pressure-Based Mixing Rule for the Prediction of High-Pressure and High-Temperature Phase Equilibria , 1998 .

[4]  Kim Michael Christiansen.  Waste : annual topic update 1998 , 1999 .

[5]  H. Grüter,et al.  Drying of Sewage Sludge – An Important Step in Waste Disposal , 1990 .

[6]  R. Moreira,et al.  Vacuum frying of potato chips , 2002 .

[7]  Yusai Yamahata,et al.  Experimental Study on Application of Paddle Dryers for Sludge Cake Drying , 1985 .

[8]  Martin Hassebrauck,et al.  Two examples of thermal drying of sewage sludge , 1996 .

[9]  A AlkhayatW,et al.  Estimating manning levels for process plants. , 1984 .

[10]  W. Tsai.  An overview of environmental hazards and exposure risk of hydrofluorocarbons (HFCs). , 2005, Chemosphere.

[11]  J. Vaxelaire,et al.  Thermal drying of residual sludge , 2000 .

[12]  R. Powell.  CFC phase-out: have we met the challenge? , 2002 .

[13]  Angélique Léonard.  Étude du séchage convectif de boues de station d'épuration - Suivi de la texture par microtomographie à rayons X , 2003 .

[14]  Tadeusz Kudra,et al.  Sticky Region in Drying—Definition and Identification , 2003 .

[15]  Don W. Green,et al.  Perry's Chemical Engineers' Handbook , 2007 .

[16]  M. Dubé,et al.  Biodiesel production from waste cooking oil: 1. Process design and technological assessment. , 2003, Bioresource technology.

[17]  G. J. McRae,et al.  ENVIRONMENTALLY CONSCIOUS CHEMICAL PROCESS DESIGN , 1998 .

[18]  William M. Vatavuk,et al.  Updating the CE Plant Cost Index , 2002 .

[19]  Tjalfe G Poulsen,et al.  Strategic environmental assessment of alternative sewage sludge management scenarios , 2003, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[20]  J. Werther,et al.  Sewage sludge combustion , 1999 .

[21]  Albrecht R. Bresters.  Sludge treatment and disposal : management approaches and experiences , 1998 .

[22]  V. Rudolph,et al.  Brazilian Journal of Chemical Engineering THE DRYING OF SEWAGE SLUDGE BY IMMERSION FRYING , 2005 .

[23]  J. T. Freire,et al.  HEAT TRANSFER IN SPOUTED BEDS , 1993 .

[24]  M. E. Castell-Perez,et al.  Deep Fat Frying: Fundamentals and Applications , 1999 .

[25]  C. Twu,et al.  MEASUREMENT AND CONTROL Get a Handle on Advanced Cubic Equations of State , 2002 .

[26]  T. S. C. Gross.  Thermal Drying of Sewage Sludge , 1993 .

[27]  A. Whipps.  A REVIEW OF THE DANGEROUS SUBSTANCES AND EXPLOSIVE ATMOSPHERE REGULATIONS IN RELATION TO THE WATER INDUSTRY , 2004 .

[28]  P. Vesilind,et al.  Limits of sludge dewaterability , 1997 .

[29]  Chorng H. Twu,et al.  Getting a handle on advanced cubic equations of state , 2002 .

[30]  Arun S. Mujumdar,et al.  SLUDGE DEWATERING AND DRYING , 2002 .

[31]  A. L. Beaman,et al.  Olfactometric characterisation of sludge odours , 2000 .

[32]  Tadeusz Kudra,et al.  Energy Aspects in Drying , 2004 .

[33]  Oil uptake in deep-fat frying: review , 1998 .

[34]  Saffa Riffat,et al.  Natural refrigerants for refrigeration and air-conditioning systems , 1997 .

[35]  Brian E. Farkas,et al.  ANALYSIS OF CONVECTIVE HEAT TRANSFER DURING IMMERSION FRYING , 2000 .

[36]  P. Arlabosse,et al.  Heat and Mass Transfer During Fry-Drying of Sewage Sludge , 2006 .

[37]  Cecil Lue-Hing,et al.  Sludge management in highly urbanized areas , 1996 .

[38]  Gael D. Ulrich,et al.  A Guide to Chemical Engineering Process Design and Economics , 1984 .

[39]  Richard Turton,et al.  Analysis, Synthesis and Design of Chemical Processes , 2002 .

[40]  Ray Sinnott,et al.  Chemical Engineering Design , 2007 .

[41]  Andrew Porteous,et al.  Energy from waste incineration — a state of the art emissions review with an emphasis on public acceptability , 2001 .

[42]  Hans K. Fauske,et al.  Boiling Heat Transfer and Two-Phase Flow , 1966 .

[43]  K. Hanaki,et al.  Fate of dissolved odorous compounds in sewage treatment plants , 1998 .

[44]  P. Richardson,et al.  Boiling heat transfer and two-phase flow , 1956 .

[45]  Didier Lecomte,et al.  Life Cycle Assessment (LCA) Applied to the Design of an Innovative Drying Process for Sewage Sludge , 2006 .

[46]  Klaus D. Timmerhaus,et al.  Plant design and economics for chemical engineers , 1958 .

[47]  M. Dubé,et al.  Biodiesel production from waste cooking oil: 2. Economic assessment and sensitivity analysis. , 2003, Bioresource technology.

[48]  Walter L. Badger,et al.  Introduction to Chemical Engineering , 1955 .