Resistance and elastic stiffness of RHS "T" joints: part I - axial brace loading

This paper presents a study on the behaviour of welded "T" joints between RHS sections under brace axial loading. A finite element model was developed to investigate the influence of some geometrical variables on the joint's response. The brace load (always in tension) was incremented up to joint failure, while the chord was kept unloaded. In the companion paper (part II) a complementary study including chord axial loading is presented. The force-displacement curves corresponding to the different geometries are analyzed and compared, focusing on the failure loads and elastic stiffness. Different failure criteria are discussed and applied to the present curves and a comparison of the numerical results with the Eurocode 3 provisions is presented and discussed.

[1]  Reidar Bjorhovde,et al.  Classification System for Beam‐to‐Column Connections , 1990 .

[2]  Jeffrey A. Packer.  Moment connections between rectangular hollow sections , 1993 .

[3]  J. A. Packer,et al.  Design Guidelines for Longitudinal Plate to HSS Connections , 1998 .

[4]  N. Kosteski,et al.  A finite element method based yield load determination procedure for hollow structural section connections , 2003 .

[5]  Pedro Colmar Gonçalves da Silva Vellasco,et al.  Experimental behaviour of end plate i-beam to concrete-filled rectangular hollow section column joints , 2002 .

[6]  X. Zhao,et al.  Hollow sections in structural applications , 2010 .

[7]  Jaap Wardenier,et al.  Semi-rigid connections between plates and rectangular hollow section columns , 1993 .

[8]  Chi King Lee,et al.  Static Strength of Cracked Square Hollow Section T Joints under Axial Loads. I: Experimental , 2006 .

[9]  Jeffrey A. Packer,et al.  Welded Tee-to-HSS Connections , 2003 .

[10]  Y. Yu.  The Static Strenght of Uniplanar and Multiplanar Connections in Rectangular Hollow Sections , 1997 .

[11]  Jeffrey A. Packer,et al.  Effective Weld Length for HSS T, Y, and X Connections , 1995 .

[12]  Jeffrey A. Packer,et al.  Yield line analysis of RHS connections with axial loads , 1998 .

[13]  M.M.K Lee,et al.  Strength, stress and fracture analyses of offshore tubular joints using finite elements , 1999 .

[14]  Jaap Wardenier,et al.  FE analysis for welded hollow-section joints and bolted joints , 2010 .

[15]  Jeffrey A Paker,et al.  Hollow structural section connections and trusses : a design guide , 1997 .

[16]  Gregory J. Hancock,et al.  Plastic mechanism analysis of T-joints in RHS subject to combined bending and concentrated force , 1993 .

[17]  Jeffrey A. Packer,et al.  Design guide for rectangular hollow section (RHS) joints under predominantly static loading , 1992 .

[18]  X. Zhao.  Deformation limit and ultimate strength of welded T-joints in cold-formed RHS sections , 2000 .

[19]  R. M. Korol,et al.  Finite Element Analysis of RHS T-Joints , 1982 .

[20]  Luciano R. O. de Lima,et al.  STRUCTURAL RESPONSE OF K AND T TUBULAR JOINTS UNDER STATIC LOADING , 2008 .