Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building

Abstract This study investigated the feasibility of PCM as a retrofitting option to reduce the zone air temperature and improve occupant thermal comfort under free running condition in an existing house in Melbourne, Australia. Both the experimental and numerical approach were applied in this study. In the experimental study, PCM was installed in the ceiling of one of the rooms and indoor air temperatures of two rooms (one with PCM and the other without PCM) were recorded. A simulation model was developed using building simulation software EnergyPlus and validated using the recorded experimental temperature data. The results showed up to 1.1°C reduction in BED 2 indoor air temperature during daytime and 34% reduction in thermal discomfort hours through the passive installation of PCM on the ceilings. Several simulations including different user behaviour scenario (windows and internal door operations) were carried out to identify the influence of user behaviour on the effectiveness of PCM. It was observed that integration of PCM is more effective in reducing thermal discomfort hours if windows are kept open at night for night purging and the internal doors are remained closed at all time to prohibit any mixing with surrounding zones without PCM. Further improvement in PCM effectiveness was observed when similar amount of PCM was spread in the ceiling and walls.

[1]  Lv Shilei,et al.  Impact of phase change wall room on indoor thermal environment in winter , 2006 .

[2]  Dong Chen,et al.  Estimation of air infiltration for Australian housing energy analysis , 2015 .

[3]  I. M. Bugaje,et al.  Enhancing the thermal response of latent heat storage systems , 1997 .

[4]  Marcus Bianchi,et al.  Verification and validation of EnergyPlus phase change material model for opaque wall assemblies , 2012 .

[5]  Brent R. Young,et al.  Application of PCM Energy Storage in Combination with Night Ventilation for Space Cooling , 2015, Thermal Energy Storage with Phase Change Materials.

[6]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .

[7]  J. Fukai,et al.  Improvement of thermal characteristics of latent heat thermal energy storage units using carbon-fiber brushes: experiments and modeling , 2003 .

[8]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[9]  Giuseppe Peter Vanoli,et al.  Energy refurbishment of existing buildings through the use of phase change materials: Energy savings and indoor comfort in the cooling season , 2014 .

[10]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[11]  André Bontemps,et al.  Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material , 2006 .

[12]  David J. Sailor,et al.  Phase Change Materials as Thermal Storage for High Performance Homes , 2011 .

[13]  David J. Sailor,et al.  Evaluation of phase change materials for improving thermal comfort in a super-insulated residential building , 2014 .

[14]  Martin Belusko,et al.  Investigation of the thermal resistance of timber attic spaces with reflective foil and bulk insulation, heat flow up , 2011 .

[15]  John L. Wilson,et al.  Parametric analysis for performance enhancement of phase change materials in naturally ventilated buildings , 2016 .

[16]  Jay G. Sanjayan,et al.  Energy saving potential of phase change materials in major Australian cities , 2014 .

[17]  Helmut Weinläder,et al.  A ventilated cooling ceiling with integrated latent heat storage—Monitoring results , 2014 .

[18]  Mohammed M. Farid,et al.  Experimental and numerical investigations on the effect of using phase change materials for energy conservation in residential buildings , 2011 .

[19]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[20]  Y. Tian,et al.  Thermal Analysis in Phase Change Materials (PCMs) Embedded With Metal Foams , 2010 .

[21]  Luisa F. Cabeza,et al.  Phase change materials and thermal energy storage for buildings , 2015 .

[22]  Jay G. Sanjayan,et al.  A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites , 2015 .

[23]  André Bontemps,et al.  Realization, test and modelling of honeycomb wallboards containing a Phase Change Material , 2011 .

[24]  A. Tayeb.  Use of some industrial wastes as energy storage media , 1996 .

[25]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[26]  W. Lu,et al.  Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs) , 2010 .

[27]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[28]  Joseph Virgone,et al.  Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation , 2008 .

[29]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[30]  R. Velraj,et al.  Effect of double layer phase change material in building roof for year round thermal management , 2008 .

[31]  Victor M. Ferreira,et al.  Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution , 2012 .