Evaluation of heavy metals in hazardous automobile shredder residue thermal residue and immobilization with novel nano-size calcium dispersed reagent.

This study was conducted to synthesize and apply a nano-size calcium dispersed reagent as an immobilization material for heavy metal-contaminated automobile shredder residues (ASR) dust/thermal residues in dry condition. Simple mixing with a nanometallic Ca/CaO/PO4 dispersion mixture immobilized 95-100% of heavy metals in ASR dust/thermal residues (including bottom ash, cavity ash, boiler and bag filter ash). The quantity of heavy metals leached from thermal residues after treatment by nanometallic Ca/CaO/PO4 was lower than the Korean standard regulatory limit for hazardous waste landfills. The morphology and elemental composition of the nanometallic Ca/CaO-treated ASR residue were characterized by field emission scanning election microscopy combined with electron dispersive spectroscopy (FE-SEM/EDS). The results indicated that the amounts of heavy metals detectable on the ASR thermal residue surface decreased and the Ca/PO4 mass percent increased. X-ray diffraction (XRD) pattern analysis indicated that the main fraction of enclosed/bound materials on ASR residue included Ca/PO4- associated crystalline complexes, and that immobile Ca/PO4 salts remarkably inhibited the desorption of heavy metals from ASR residues. These results support the potential use of nanometallic Ca/CaO/PO4 as a simple, suitable and highly efficient material for the gentle immobilization of heavy metals in hazardous ASR thermal residue in dry condition.

[1]  Ling Zhao,et al.  Biochar- and phosphate-induced immobilization of heavy metals in contaminated soil and water: implication on simultaneous remediation of contaminated soil and groundwater , 2014, Environmental Science and Pollution Research.

[2]  Tetsuji Okuda,et al.  High immobilization of soil cesium using ball milling with nano-metallic Ca/CaO/NaH2PO4: implications for the remediation of radioactive soils , 2012, Environmental Chemistry Letters.

[3]  Michael A. Marino,et al.  Heavy metal soil remediation: The effects of attrition scrubbing on a wet gravity concentration process , 1997 .

[4]  Yong-Chil Seo,et al.  Management status of end-of-life vehicles and characteristics of automobile shredder residues in Korea. , 2004, Waste management.

[5]  L. Di Palma,et al.  Production of aggregate from non-metallic automotive shredder residues. , 2006, Journal of hazardous materials.

[6]  T. Okuda,et al.  Enhanced heavy metal immobilization in soil by grinding with addition of nanometallic Ca/CaO dispersion mixture. , 2012, Chemosphere.

[7]  J. Pera,et al.  Valorization of automotive shredder residue in building materials , 2004 .

[8]  S. Paria,et al.  Solidification/Stabilization of Organic and Inorganic Contaminants using Portland Cement: A Literature Review , 2006 .

[9]  Hwa Young Lee Characteristics and heavy metal leaching of ash generated from incineration of automobile shredder residue. , 2007, Journal of hazardous materials.

[10]  Tetsuji Okuda,et al.  Separation of polyvinyl chloride (PVC) from automobile shredder residue (ASR) by froth flotation with ozonation. , 2007, Journal of hazardous materials.

[11]  Shin-ichi Sakai,et al.  Full-scale plant study on fly ash treatment by the acid extraction process , 1996 .

[12]  S. Nakayama,et al.  Immobilization of strontium by crystalline zirconium phosphate , 2003 .

[13]  J. Derome Detoxification and amelioration of heavy-metal contaminated forest soils by means of liming and fertilisation. , 2000, Environmental pollution.

[14]  Herng-Yuh Lin,et al.  Stabilization of cadmium contaminated soils using synthesized zeolite , 1998 .

[15]  Daphne Mirabile,et al.  Thermal valorisation of automobile shredder residue: injection in blast furnace. , 2002, Waste management.

[16]  Ana Guerrero,et al.  Efficiency of fly ash belite cement and zeolite matrices for immobilizing cesium. , 2006, Journal of hazardous materials.

[17]  A. Cunliffe,et al.  Pyrolysis of composite plastic waste , 2003, Environmental technology.

[18]  V. Simić,et al.  End-of-life vehicle recycling - A review of the state-of-the-art , 2013 .

[20]  S. Sakai,et al.  Brominated flame retardants and heavy metals in automobile shredder residue (ASR) and their behavior in the melting process , 2008 .

[21]  L. Ma,et al.  Phosphate-induced metal immobilization in a contaminated site. , 2003, Environmental pollution.

[22]  R. Stegmann Treatment of contaminated soil : fundamentals, analysis, applications , 2001 .

[23]  A Polettini,et al.  Properties of Portland cement--stabilised MSWI fly ashes. , 2001, Journal of hazardous materials.

[24]  P. Castaldi,et al.  Heavy metal immobilization by chemical amendments in a polluted soil and influence on white lupin growth. , 2005, Chemosphere.

[25]  G Mancini,et al.  On the ASR and ASR thermal residues characterization of full scale treatment plant. , 2014, Waste management.

[26]  Yoon-Seok Chang,et al.  The evaluation of PCDD/Fs from various Korean incinerators , 1999 .

[27]  Kayo Sawada,et al.  Immobilization of lead compounds in fly ash by mixing with asphalt, sulfur and sodium hydroxide , 2001 .

[28]  T Matsuto,et al.  Pretreatment of automobile shredder residue (ASR) for fuel utilization. , 2008, Chemosphere.

[29]  Michel Mench,et al.  Evaluation of hydroxyapatite as a metal immobilizing soil additive for the remediation of polluted soils. Part 1. Influence of hydroxyapatite on metal exchangeability in soil, plant growth and plant metal accumulation , 1999 .

[30]  Fabrizio Passarini,et al.  A comparison among different automotive shredder residue treatment processes , 2010 .

[31]  M. Ahmaruzzaman,et al.  A review on the utilization of fly ash , 2010 .

[32]  M. Chuan,et al.  Solubility of heavy metals in a contaminated soil: Effects of redox potential and pH , 1996 .

[33]  A. Zouboulis,et al.  In situ stabilization of toxic metals in polluted soils using phosphates: theoretical prediction and experimental verification. , 2005, Journal of hazardous materials.

[34]  M. Lai,et al.  Diffusion in mechanical alloying , 1997 .