A Microfluidic Platform for the Rapid Determination of Distribution Coefficients by Gravity-Assisted Droplet-Based Liquid-Liquid Extraction.

The determination of pharmacokinetic properties of drugs, such as the distribution coefficient (D) is a crucial measurement in pharmaceutical research. Surprisingly, the conventional (gold standard) technique used for D measurements, the shake-flask method, is antiquated and unsuitable for the testing of valuable and scarce drug candidates. Herein, we present a simple microfluidic platform for the determination of distribution coefficients using droplet-based liquid-liquid extraction. For simplicity, this platform makes use of gravity to enable phase separation for analysis and is 48 times faster and uses 99% less reagents than performing an equivalent measurement using the shake-flask method. Furthermore, the D measurements achieved in our platform are in good agreement with literature values measured using traditional shake-flask techniques. Since D is affected by volume ratios, we use the apparent acid dissociation constant, pK', as a proxy for intersystem comparison. Our platform determines a pK' value of 7.24 ± 0.15, compared to 7.25 ± 0.58 for the shake-flask method in our hands and 7.21 for the shake-flask method in the literature. Devices are fabricated using injection molding, the batchwise fabrication time is <2 min per device (at a cost of $1 U.S. per device), and the interdevice reproducibility is high.

[1]  J. Posner,et al.  Partition coefficient measurements in picoliter drops using a segmented flow microfluidic device. , 2009, Analytical chemistry.

[2]  A. deMello,et al.  The past, present and potential for microfluidic reactor technology in chemical synthesis. , 2013, Nature chemistry.

[3]  Takashi Korenaga,et al.  Quantitative extraction using flowing nano-liter droplet in microfluidic system , 2006 .

[4]  K. Jensen,et al.  Integrated continuous microfluidic liquid-liquid extraction. , 2007, Lab on a chip.

[5]  Rafael J. Taboryski,et al.  Injection molded chips with integrated conducting polymer electrodes for electroporation of cells , 2010 .

[6]  Takehiko Kitamori,et al.  Microchip-based liquid-liquid extraction for gas-chromatography analysis of amphetamine-type stimulants in urine. , 2006, Journal of chromatography. A.

[7]  Klavs F Jensen,et al.  Surfactant-enhanced liquid-liquid extraction in microfluidic channels with inline electric-field enhanced coalescence. , 2005, Lab on a chip.

[8]  V. Studer,et al.  Microfluidic droplet-based liquid-liquid extraction. , 2008, Analytical chemistry.

[9]  Dong Liang,et al.  Initial study of two-phase laminar flow extraction chip for sample preparation for gas chromatography. , 2006, Lab on a chip.

[10]  Determination of log D via automated microfluidic liquid-liquid extraction. , 2008, Journal of medicinal chemistry.

[11]  Zhao-Lun Fang,et al.  Microfluidic chip-based liquid-liquid extraction and preconcentration using a subnanoliter-droplet trapping technique. , 2005, Lab on a chip.

[12]  H. Herzig,et al.  Microfluidic droplet-based liquid-liquid extraction and on-chip IR spectroscopy detection of cocaine in human saliva. , 2013, Analytical chemistry.

[13]  R. M. Threatte,et al.  Fluorescence of 6-methoxyquinoline, quinine, and quinidine in aqueous media. , 1974, Journal of pharmaceutical sciences.

[14]  Robert W. Lewis,et al.  Thiolene and SIFEL-based Microfluidic Platforms for Liquid-Liquid Extraction. , 2014, Sensors and actuators. B, Chemical.

[15]  J. Craig,et al.  Malaria Journal the Relationship of Physico-chemical Properties and Structure to the Differential Antiplasmodial Activity of the Cinchona Alkaloids , 2022 .

[16]  J. Baret Surfactants in droplet-based microfluidics. , 2012, Lab on a chip.

[17]  F. Clarke,et al.  Ionization constants by curve fitting: application to the determination of partition coefficients. , 1984, Journal of pharmaceutical sciences.

[18]  P Novo,et al.  On-chip sample preparation and analyte quantification using a microfluidic aqueous two-phase extraction coupled with an immunoassay. , 2014, Lab on a chip.

[19]  Mikkel Fougt Hansen,et al.  Fabrication and modelling of injection moulded all-polymer capillary microvalves for passive microfluidic control , 2014 .