Evaluation of coatings, mortars and mix design for protection of concrete against sulphur oxidising bacteria

Abstract Deterioration of concrete in cooling tower basins by microbiologically influenced corrosion (MIC) is a concern in geothermal power plants. The effect of supplementary cementitious materials, epoxy coatings, latex-modified mortars and calcium aluminate cement mortar for protecting concrete from MIC was investigated. Laboratory exposure tests to a particular type of sulphur and iron oxidising bacteria, Thiobacillus ferrooxidans , were performed to rank candidate materials and these were followed by field exposure tests of the best materials in a cooling tower basin. It was determined that partial replacement of cement with 40% blast furnace slag or 5% to 10% silica fume improved resistance to MIC. A replacement level of 60% slag resulted in similar performance to concrete made with ordinary Portland or sulphate resistant cement. Epoxy- and styrene butadiene latex-modified mortars offered protection to concrete but still underwent a degree of attack. Epoxy coatings were found to be effective in protecting concrete. Calcium aluminate cement mortar showed excellent durability in laboratory and field tests.

[1]  Nele De Belie,et al.  Effectiveness of admixtures, surface treatments and antimicrobial compounds against biogenic sulfuric acid corrosion of concrete , 2009 .

[2]  Surendra P. Shah,et al.  Effects of curing conditions on properties of concrete using slag replacement , 2000 .

[3]  Michael D.A. Thomas,et al.  Performance of Slag Concrete in Marine Environment , 2008 .

[4]  Mark Alexander,et al.  Performance of sewer pipe concrete mixtures with portland and calcium aluminate cements subject to mineral and biogenic acid attack , 2011 .

[5]  Peter Pryfogle,et al.  Monitoring Biological Activity at Geothermal Power Plants , 2005 .

[6]  A. Neville.  Properties of Concrete , 1968 .

[7]  Roger Sydney,et al.  Control concrete sewer corrosion via the crown spray process , 1996 .

[8]  D. Walters.  COMPARISON OF LATEX-MODIFIED PORTLAND CEMENT MORTARS , 1990 .

[9]  Martin O’Connell,et al.  Biochemical attack on concrete in wastewater applications: A state of the art review , 2010 .

[10]  K. Scrivener,et al.  High-performance concretes from calcium aluminate cements , 1999 .

[11]  Eberhard Bock,et al.  Biogenic and Chemical Sulfuric Acid Corrosion of Mortars , 1999 .

[12]  Luc Taerwe,et al.  Chemical and microbiological tests to simulate sulfuric acid corrosion of polymer-modified concrete , 2001 .

[13]  Satoshi Okabe,et al.  Succession of Sulfur-Oxidizing Bacteria in the Microbial Community on Corroding Concrete in Sewer Systems , 2006, Applied and Environmental Microbiology.

[14]  W. Sand,et al.  Microbial corrosion of concrete , 1991, Experientia.

[15]  Luc Taerwe,et al.  Influence of polymer addition on biogenic sulfuric acid attack of concrete , 2002 .

[16]  Ha Videla,et al.  Manual of biocorrosion , 1996 .

[17]  Willy Verstraete,et al.  EXPERIMENTAL RESEARCH AND PREDICTION OF THE EFFECT OF CHEMICAL AND BIOGENIC SULFURIC ACID ON DIFFERENT TYPES OF COMMERCIALLY PRODUCED CONCRETE SEWER PIPES , 2004 .

[18]  Imre Biczók,et al.  Concrete corrosion and concrete protection , 1967 .

[19]  U. Citernesi,et al.  Microbiological aspects of concrete and iron deterioration in geothermal power-plants , 1985 .

[20]  R. Coleman,et al.  Thiobacillus neopolitanus implicated in the degradation of concrete tanks used for potable water storage , 1993 .

[21]  H. Thornton.  Acid Attack of Concrete Caused by Sulfur Bacteria Action. , 1977 .