Intelligent structures based on the improved activation of shape memory polymers using Peltier cells

This study is focused on obtaining intelligent structures manufactured from shape memory polymers possessing the ability to change their geometry in successive or 'step-by-step' actions. This objective has been reached by changing the conventionally used shape memory activation systems (heating resistance, laser or induction heating). The solution set out consists in using Peltier cells as a heating system capable of heating (and activating) a specific zone of the device in the first activation, while the opposite zone keeps its original geometry. By carefully reversing the polarity of the electrical supply to the Peltier cell, in the second activation, the as yet unchanged zone is activated while the already changed zone in the first activation remains unaltered. We have described the criteria for the selection, calibration and design of this alternative heating (activation) system based on the thermoelectric effect, together with the development of different 'proof of concept' prototypes that have enabled us to validate the concepts put forward, as well as suggest future improvements for 'intelligent' shape memory polymer-based devices.

[1]  Márcio Celso Fredel,et al.  Stereolithography somos 7110 resin: mechanical behavior and fractography of parts post-cured by different methods , 2005 .

[2]  J. Giannatsis,et al.  Additive fabrication technologies applied to medicine and health care: a review , 2009 .

[3]  Mel M. Schwartz,et al.  New Materials, Processes, and Methods Technology , 2005 .

[4]  Ryan B. Wicker,et al.  Functionalizing stereolithography resins: effects of dispersed multi‐walled carbon nanotubes on physical properties , 2006 .

[5]  B. Wiedemann,et al.  Investigation into the influence of material and process on part distortion , 1995 .

[6]  Andreas Lendlein,et al.  Investigation of parameters to achieve temperatures required to initiate the shape-memory effect of magnetic nanocomposites by inductive heating , 2009 .

[7]  Xin Lan,et al.  Fiber reinforced shape-memory polymer composite and its application in a deployable hinge , 2009 .

[8]  Yang-Tse Cheng,et al.  Revealing triple-shape memory effect by polymer bilayers. , 2009, Macromolecular rapid communications.

[9]  Xin Lan,et al.  Review of electro-active shape-memory polymer composite , 2009 .

[10]  Andrés Díaz Lantada,et al.  Biodevices based on Shape-memory Polymers - Current Capabilities and Challenges , 2009, BIODEVICES.

[11]  R. Langer,et al.  Polymeric triple-shape materials , 2006, Proceedings of the National Academy of Sciences.

[12]  Jinsong Leng,et al.  Synergic effect of carbon black and short carbon fiber on shape memory polymer actuation by electricity , 2008 .

[13]  Hermann Seitz,et al.  Non‐toxic flexible photopolymers for medical stereolithography technology , 2007 .

[14]  Christian Lexcellent,et al.  An integrated shape memory alloy micro actuator controlled by thermoelectric effect , 2002 .

[15]  Jinsong Leng,et al.  Shape‐Memory Polymer in Response to Solution , 2008 .

[16]  N. Jawahar,et al.  Influence of layer thickness on mechanical properties in stereolithography , 2006 .

[17]  Xin Lan,et al.  Electroactive thermoset shape memory polymer nanocomposite filled with nanocarbon powders , 2009 .

[18]  L. Yahia,et al.  Medical applications of shape memory polymers , 2007, Biomedical materials.

[19]  Hisaaki Tobushi,et al.  Thermomechanical properties in a thin film of shape memory polymer of polyurethane series , 1996 .

[21]  Yiping Liu,et al.  Thermomechanical recovery couplings of shape memory polymers in flexure , 2003 .

[22]  R. Langer,et al.  Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications , 2002, Science.

[23]  Andrés Díaz Lantada.  Metodologia para el desarrollo de dispositivos medicos basados en el empleo de polimeros activos como sensores y actuadores , 2011 .

[24]  Wei Min Huang,et al.  On the effects of moisture in a polyurethane shape memory polymer , 2004 .

[25]  Patrick T. Mather,et al.  Review of progress in shape-memory polymers , 2007 .

[26]  Hisaaki Tobushi,et al.  Shape recovery and irrecoverable strain control in polyurethane shape-memory polymer , 2008, Science and technology of advanced materials.

[27]  Toshiyuki Takagi,et al.  A Shape Memory Alloy Actuator Using Peltier Modules and R-Phase Transition , 2000 .

[28]  A. Lendlein,et al.  Shape-memory polymers , 2002 .

[29]  Andrés Díaz Lantada,et al.  Intelligent Expandable Structures based on the Improved Activation of Shape-memory Polymers , 2018, BIODEVICES.

[30]  Angel Igelmo Ganzo,et al.  Transmisión del calor , 1979 .

[31]  Erica G. Hocking,et al.  Remote activation of nanomagnetite reinforced shape memory polymer foam , 2009 .

[32]  Jinsong Leng,et al.  Shape-Memory Polymers—A Class of Novel Smart Materials , 2009 .

[33]  A Lendlein,et al.  Shape-memory polymers as stimuli-sensitive implant materials. , 2005, Clinical hemorheology and microcirculation.

[34]  Yanju Liu,et al.  Electroactivate shape-memory polymer filled with nanocarbon particles and short carbon fibers , 2007 .

[35]  V. Lorenzo,et al.  Physical ageing of a PU-based shape memory polymer: Influence on their applicability to the development of medical devices , 2009 .

[36]  Xin Lan,et al.  Significantly reducing electrical resistivity by forming conductive Ni chains in a polyurethane shape-memory polymer/carbon-black composite , 2008 .

[37]  Yoseph Bar-Cohen,et al.  Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, Second Edition , 2004 .