Rheological and low temperature properties of asphalt composites containing rock asphalts

Abstract This paper presents the findings from a study conducted to evaluate the potential impact of different types of rock asphalts on performance of asphalt composites. Fine aggregate matrix (FAM) mixtures were prepared by incorporating three different types of rock asphalts – Buton, QC and UM for this study. The methodology used in this study avoided the extraction of asphalt binder from rock asphalt and simplified the process of evaluating the potential impact of rock asphalts on mixture performance. Rheological properties were measured using frequency–temperature sweep tests with a dynamic shear rheometer and creep–relaxation tests with a bending beam rheometer. Tensile strengths of the composites at low temperatures were also measured by applying monotonically increasing deflection. The critical cracking temperatures were computed using a hypothetical cooling rate for the purposes of comparing material durability. Results from this study demonstrated that addition of rock asphalts increases material stiffness and slightly reduces relaxation potential of asphalt composites at low temperatures. A comparison of properties before and after long-term aging also revealed a slightly lower rate of aging for mixtures modified with rock asphalt as compared to the control mix.

[1]  E. Sternberg,et al.  On Transient Thermal Stresses in Viscoelastic Materials With Temperature-Dependent Properties , 1961 .

[2]  Y. Richard Kim,et al.  Effect of volumetric factors on the mechanical behavior of asphalt fine aggregate matrix and the relationship to asphalt mixture properties , 2013 .

[3]  Matthew W Witczak,et al.  Asphalt Mix Master Curve Construction Using Sigmoidal Fitting Function with Non-Linear Least Squares Optimization , 2003 .

[4]  D. Little,et al.  Dynamic Modulus Prediction of Asphalt Concrete Mixtures through Computational Micromechanics , 2015 .

[5]  D. Little,et al.  Semiempirical, Analytical, and Computational Predictions of Dynamic Modulus of Asphalt Concrete Mixtures , 2010 .

[6]  Shu-tang Liu,et al.  Analysis and application of relationships between low-temperature rheological performance parameters of asphalt binders , 2010 .

[7]  R. Elliott,et al.  Characteristics of elastomeric and plastomeric binders in contact with natural asphalts , 2008 .

[8]  R. Christensen.  Theory of viscoelasticity : an introduction , 1971 .

[9]  David A Anderson,et al.  Field Performance of Modified Asphalt Binders Evaluated with Superpave Test Methods: I-80 Test Project , 1999 .

[10]  Mehmet Yilmaz,et al.  Effects of SBS and different natural asphalts on the properties of bituminous binders and mixtures , 2013 .

[11]  P. P. Riviera,et al.  Performance-Related Characterization of Bituminous Binders and Mixtures Containing Natural Asphalt , 2012 .

[12]  Robert L. Lytton,et al.  FATIGUE AND HEALING CHARACTERIZATION OF ASPHALT MIXTURES , 2003 .

[13]  A. Chowdhury,et al.  EVALUATION OF BINDER AGING AND ITS INFLUENCE IN AGING OF HOT MIX ASPHALT CONCRETE: LITERATURE REVIEW AND EXPERIMENTAL DESIGN , 2009 .

[14]  Mahmoud Ameri,et al.  Technical study on the Iranian Gilsonite as an additive for modification of asphalt binders used in pavement construction , 2011 .

[15]  Bambang Ismanto Siswosoebrotho,et al.  LABORATORY EVALUATION OF LAWELE BUTON NATURAL ASPHALT IN ASPHALT CONCRETE MIXTURE , 2005 .

[16]  Leslie Morland,et al.  Stress Analysis for Linear Viscoelastic Materials with Temperature Variation , 1960 .