Kinematic Isotropy and the Optimum Design of Parallel Manipulators

The differential kinematic equations (DKE) of parallel manip ulators usually involve two Jacobian matrices that, depending on the role they play in the kinetostatic transformation between the joint and Cartesian variables, are commonly referred to as the forward and the inverse Jacobians. In this article, we make use of the special structure of these Jacobians to define a set of conditions under which a parallel manipulator can be rendered isotropic. These conditions are general, and pro vide a systematic method for the optimum kinematic design of parallel manipulators, with or without introducing structural constraints. The application of the proposed conditions is illus trated in detail through a few examples, one of which pertains to the design of a 6-DOF isotropic parallel manipulator.

[1]  Rajnikant V. Patel,et al.  The mechanical design of a seven-axes manipulator with kinematic isotropy , 1995, J. Intell. Robotic Syst..

[2]  K. C. Gupta,et al.  Design Considerations for Manipulator Workspace , 1982 .

[3]  Charles A. Klein,et al.  Spatial Robotic Isotropy , 1991, Int. J. Robotics Res..

[4]  Jorge Angeles,et al.  Instantaneous kinematics and design of a novel redundant parallel manipulator , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[5]  Kenneth J. Waldron,et al.  Geometric optimization of manipulator structures for working volume and dexterity , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[6]  Ou Ma.  Mechanical analysis of parallel manipulators with simulation, design, and control applications , 1991 .

[7]  J. Angeles,et al.  Kinematic Isotropy and the Conditioning Index of Serial Robotic Manipulators , 1992 .

[8]  C. Gosselin,et al.  The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator , 1988 .

[9]  Clément Gosselin,et al.  A Global Performance Index for the Kinematic Optimization of Robotic Manipulators , 1991 .

[10]  Richard P. Paul,et al.  Kinematics of Robot Wrists , 1983 .

[11]  Clément Gosselin,et al.  On the Kinematic Design of Spherical Three-Degree-of- Freedom Parallel Manipulators , 1993, Int. J. Robotics Res..

[12]  Tsuneo Yoshikawa,et al.  Manipulability of Robotic Mechanisms , 1985 .

[13]  Roger W. Brockett,et al.  Kinematic Dexterity of Robotic Mechanisms , 1994, Int. J. Robotics Res..

[14]  Tsuneo Yoshikawa,et al.  Dynamic Manipulability of Robot Manipulators , 1985 .

[15]  Ron P. Podhorodeski,et al.  A family of stewart platforms with optimal dexterity , 1993, J. Field Robotics.

[16]  Charles A. Klein,et al.  Dexterity Measures for the Design and Control of Kinematically Redundant Manipulators , 1987 .

[17]  J.Eddie Baker,et al.  An analysis of the Bricard linkages , 1980 .

[18]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[19]  Kenneth J. Waldron,et al.  Geometric Optimization of Serial Chain Manipulator Structures for Working Volume and Dexterity , 1986 .

[20]  John J. Craig,et al.  Articulated hands: Force control and kinematic issues , 1981 .

[21]  J. Angeles.  The Design of Isotropic Manipulator Architectures in the Presence of Redundancies , 1992 .