Effects of fuel cracking on combustion characteristics of a supersonic model combustor

Abstract The compositions of endothermic hydrocarbon fuels in cooling channels of regenerative cooled scramjet engines change along with fuel cracking. To investigate the effect of fuel compositions variation resulting from cracking on the combustion characteristics of supersonic combustors, a series of combustion tests with a wide range of equivalence ratios were conducted in a direct-connected test rig under the inflow conditions of Ma=3.46 and Tt=1430 K. The combustion characteristics of room temperature ethylene and vaporized China no. 3 aviation kerosene (RP-3) with negligible cracking were analyzed and compared based on the measured static pressure distributions along the combustor wall, fuel specific impulses, flame luminosity images and the one-dimensional average flow parameter distributions calculated by a quasi-one-dimensional data analysis method. The experimental results showed that the differences between the combustion characteristics of vaporized RP-3 and ethylene were sensitive to equivalence ratio. Under low equivalence ratios, vaporized RP-3 and ethylene had remarkably different combustion characteristics. Ethylene had an obvious higher static pressure level, specific impulse and combustion efficiency than vaporized RP-3 for its higher activity. The difference of combustion performance between vaporized RP-3 and ethylene was narrowed with the increase of equivalence ratio and the corresponding combustion condition improvement. When the equivalence ratio increased to 1.09, vaporized RP-3 and ethylene had tiny difference in combustion performance.

[1]  Yongsheng Guo,et al.  Pyrolysis of hydrocarbon fuel ZH-100 under different pressures , 2009 .

[2]  Nickolay Smirnov,et al.  Detonation engine fed by acetylene–oxygen mixture , 2014 .

[3]  Drummond J. Philip,et al.  Future Direction of Supersonic Combustion Research: Air Force/NASA Workshop on Supersonic Combustion , 1997 .

[4]  Gong Yu,et al.  Combustion and Ignition of Thermally Cracked Kerosene in Supersonic Model Combustors , 2007 .

[5]  Hao Li,et al.  Numerical investigation of the nonreacting and reacting flow fields in a transverse gaseous injection channel with different species , 2014 .

[6]  W. R. Wagner,et al.  Advanced regenerative-cooling techniques for future space transportation systems , 1975 .

[7]  Nickolay Smirnov,et al.  Onset of detonation in polydispersed fuel–air mixtures , 2007 .

[8]  T. Edwards.  Liquid Fuels and Propellants for Aerospace Propulsion: 1903-2003 , 2003 .

[9]  Guozhu Liu,et al.  Catalytic cracking of n-dodecane over HZSM-5 zeolite under supercritical conditions: Experiments and kinetics , 2010 .

[10]  Zhenguo Wang,et al.  Mixing-related low frequency oscillation of combustion in an ethylene-fueled supersonic combustor , 2015 .

[11]  Daniel James Micka,et al.  Combustion stabilization, structure, and spreading in a laboratory dual-mode scramjet combustor , 2010 .

[12]  C. Sung,et al.  Injection of Supercritical Aviation kerosene fuel into quiescent atmospheric environment , 2009 .

[13]  Nickolay Smirnov,et al.  Ignition of fuel sprays by shock wave mathematical modeling and numerical simulation , 2013 .

[14]  He Huang,et al.  Fuel-Cooled Thermal Management for Advanced Aeroengines , 2004 .

[15]  Jianguo Li,et al.  Thermal cracking of aviation kerosene for scramjet applications , 2009 .

[16]  Nickolay Smirnov,et al.  Evaporation and ignition of droplets in combustion chambers modeling and simulation , 2012 .

[17]  Jianhan Liang,et al.  Spark ignition process in a scramjet combustor fueled by hydrogen and equipped with multi-cavities at Mach 4 flight condition , 2012 .

[18]  Vigor Yang,et al.  Modeling of supercritical vaporization, mixing, and combustion processes in liquid-fueled propulsion systems , 2000 .

[19]  John Hoke,et al.  Evaluation of Catalytic and Thermal Cracking in a JP-8 Fueled Pulsed Detonation Engine (Postprint) , 2007 .

[20]  A. C. Nixon,et al.  Endothermic fuels for hypersonic vehicles , 1968 .

[21]  Heat Transfer of Aviation Kerosene at Supercritical Conditions , 2009 .

[22]  Characterization of a Supersonic Model Combustor with Partially-Cracked Kerosene , 2005 .

[23]  Zhenguo Wang,et al.  Experimental Investigation of Supersonic Model Combustor with Distributed Injection of Supercritical Kerosene , 2014 .

[24]  Jin Zhou,et al.  Experimental investigation on flow patterns of RP-3 kerosene under sub-critical and supercritical pressures , 2014 .

[25]  Philippe Gillard,et al.  Synthetic and jet fuels pyrolysis for cooling and combustion applications , 2010 .

[26]  Experimental Study on Combustion of Thermally-Cracked Kerosene in Model Supersonic Combustors , 2006 .

[27]  Chih-Jen Sung,et al.  Investigation of Vaporized Kerosene Injection and Combustion in a Supersonic Model Combustor , 2006 .

[28]  Nickolay Smirnov,et al.  Microgravity investigation of laminar flame propagation in monodisperse gas droplet mixtures , 2007 .

[29]  X. Fan.  Performance of Supersonic Model Combustors with Distributed Injection of Supercritical Kerosene , 2007 .