Fabrication of an antireflective polymer optical film with subwavelength structures using a roll-to-roll micro-replication process

An antireflective optical film with subwavelength structures replicated by use of a roll-to-roll micro-replication process (RMRP) is investigated. Firstly, a single layer of a nanostructure on a polymer film is designed for an antireflection purpose by the finite difference time domain method in the visible light spectrum. Structures of a conical cylinder array, with spatial period of 400 nm, diameter of 200 nm and height of 350 nm, are numerically obtained. Then, such structures are fabricated by RMRP combining originated structure fabrication realized by deep ultra-violet lithography and dry etching, Ni mold electroplating and replication by using the roll-to-roll process imprinting into the flexible polyethylene terephthalate substrate. A nanostructure roller mold bonded with Ni molds has been successfully fabricated and coated with the self-assembly monolayer process for the purpose of fabricating an anti-adhesion film and improving the lifetime of the Ni molds. The duplicated nanostructure films show a good optical quality of antireflection (AR ≤ 2.45% in a 400–700 nm spectral range) and are in good agreement with the theoretical predictions. The experimental results show that the developed process is a promising and cost-effective method for the continuous duplication of flexible devices with nano-scaled feature sizes used in nanophotonics by RMRP.

[1]  S. Chou,et al.  Roller nanoimprint lithography , 1998 .

[2]  D. Rouvray.  Such Silver Currents: the Story of William and Lucy Clifford 1845–1929 , 2002 .

[3]  George M. Whitesides,et al.  Spontaneous formation of ordered structures in thin films of metals supported on an elastomeric polymer , 1998, Nature.

[4]  M. Weck,et al.  Fabrication of microcomponents using ultraprecision machine tools , 1997 .

[5]  K. Hane,et al.  High efficient light-emitting diodes with antireflection subwavelength gratings , 2002, IEEE Photonics Technology Letters.

[6]  William H. Southwell,et al.  Practical Design and Production of Optical Thin Films , 1997 .

[7]  Guy Voirin,et al.  One-step 3D shaping using a gray-tone mask for optical and microelectronic applications , 1994 .

[8]  K. Hane,et al.  Subwavelength Antireflection Gratings for GaSb in Visible and Near-Infrared Wavelengths , 2003 .

[9]  K. Hane,et al.  Broadband antireflection gratings fabricated upon silicon substrates. , 1999, Optics letters.

[10]  Chi‐Feng Chen,et al.  Diffractive beam splitting microlens for fiber coupling fabricated by UV imprinting process , 2008 .

[11]  A. Gombert,et al.  Some application cases and related manufacturing techniques for optically functional microstructures on large areas , 2004 .

[12]  W H Southwell,et al.  Antireflection surfaces in silicon using binary optics technology. , 1992, Applied optics.

[13]  Walter Bacher,et al.  Hot embossing - The molding technique for plastic microstructures , 1998 .

[14]  L. J. Guo,et al.  Nanoimprint Lithography: Methods and Material Requirements , 2007 .

[15]  Volker Wittwer,et al.  Antireflective submicrometer surface-relief gratings for solar applications , 1998 .

[16]  Ronald R. Willey,et al.  Practical Design and Production of Optical Thin Films , 1996 .

[17]  J. Nishii,et al.  Antireflection microstructures fabricated upon fluorine-doped SiO(2) films. , 2001, Optics letters.

[18]  Ernst-Bernhard Kley,et al.  Fabrication and application of subwavelength gratings , 1997, Photonics West.

[19]  J. Bérenger.  Perfectly matched layer for the FDTD solution of wave-structure interaction problems , 1996 .

[20]  M. Heckele,et al.  Review on micro molding of thermoplastic polymers , 2004 .

[21]  Tomi Haatainen,et al.  Continuous roll to roll nanoimprinting of inherently conducting polyaniline , 2007 .

[22]  K. Hane,et al.  Subwavelength Antireflection Gratings for Light Emitting Diodes and Photodiodes Fabricated by Fast Atom Beam Etching , 2001, Digest of Papers. Microprocesses and Nanotechnology 2001. 2001 International Microprocesses and Nanotechnology Conference (IEEE Cat. No.01EX468).

[23]  Michael T. Gale,et al.  Replication technology for optical microsystems , 2005 .

[24]  Masat Izu,et al.  Roll-to-roll manufacturing of amorphous silicon alloy solar cells with in situ cell performance diagnostics , 2003 .

[25]  Michael T. Gale.  Replicated Diffractive Optics and Micro-Optics , 2003 .

[26]  Kanti Jain,et al.  Flexible Electronics and Displays: High-Resolution, Roll-to-Roll, Projection Lithography and Photoablation Processing Technologies for High-Throughput Production , 2005, Proceedings of the IEEE.

[27]  R. Morf,et al.  Submicrometer gratings for solar energy applications. , 1995, Applied optics.

[28]  A. Gombert,et al.  7.3: Holographic Antiglare and Antireflection Films for Flat Panel Displays , 2003 .

[29]  Y Li,et al.  Pulsed-mode laser Sagnac interferometry with applications in nonlinear optics and optical switching. , 1986, Applied Optics.

[30]  Kazuhiro Hane,et al.  Broadband Antireflection Gratings for Glass Substrates Fabricated by Fast Atom Beam Etching , 2000 .

[31]  G. Michael Morris,et al.  Design, fabrication, and characterization of subwavelength periodic structures for semiconductor antireflection coating in the visible domain , 1996, Optical Systems Design.

[32]  G. Michael Morris,et al.  Antireflection behavior of silicon subwavelength periodic structures for visible light , 1997 .

[33]  H. Dreuth,et al.  Thermoplastic structuring of thin polymer films , 1999 .