La manufactura aditiva y los materiales compuestos en el diseño de prótesis transtibiales de uso deportivo

In the present work the state of the art that preserves the additive manufacturing is reviewed in terms of the advances in the improvement of its materials, specifically, through the incorporation of composite materials, such as carbon fiber. In addition, a review of the conventional processes of the manufacture of composites and analyzes the degree of the application of the manufacture and the composite materials in the manufacture of the transtibial prosthesis for sport use, with the objective of identifying improvement opportunities.

[1]  B. Stucker,et al.  Material Jetting , 2020, Additive Manufacturing Technologies.

[2]  I. Gibson,et al.  Design for Additive Manufacturing , 2020, Additive Manufacturing Technologies.

[3]  F. Martina,et al.  Design for Additive Manufacturing , 2019 .

[4]  Jerzy Warminski,et al.  Dynamics of the middle ear ossicles with an SMA prosthesis , 2017 .

[5]  R. Day,et al.  Aerospace composite cured by quickstep and autoclave processing techniques: Evaluation and comparison of reaction progress , 2017 .

[6]  Chee Kai Chua,et al.  Fundamentals and applications of 3D printing for novel materials , 2017 .

[7]  N. Coppedé,et al.  Smart composites materials: A new idea to add gas-sensing properties to commercial carbon-fibers by functionalization with ZnO nanowires , 2017 .

[8]  Yanchun Zhai,et al.  Optimal lay-ups to maximize loss factor of cross-ply composite plate , 2017 .

[9]  Joshua M. Pearce,et al.  Tensile strength of commercial polymer materials for fused filament fabrication 3D printing , 2017 .

[10]  Luca Sorrentino,et al.  Manufacture of high performance isogrid structure by Robotic Filament Winding , 2017 .

[11]  Anne Simmons,et al.  Mechanical characterization and comparison of energy storage and return prostheses. , 2017, Medical engineering & physics.

[12]  Dichen Li,et al.  3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance , 2017 .

[13]  A. Romero,et al.  Development of feedstocks based on steel matrix composites for metal injection moulding , 2017 .

[14]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[15]  S. Nutt,et al.  Effect of prepreg format on defect control in out-of-autoclave processing , 2017 .

[16]  Eugenio Guglielmino,et al.  Life cycle assessment in yacht industry: A case study of comparison between hand lay-up and vacuum infusion , 2017 .

[17]  I. Telichev,et al.  Experimental and numerical study of hypervelocity impact damage in composite materials fabricated by filament winding , 2016 .

[18]  Nathalie Labonnote,et al.  Additive construction: State-of-the-art, challenges and opportunities , 2016 .

[19]  Bradley A. Newcomb.  Processing, structure, and properties of carbon fibers , 2016 .

[20]  Brad E Dicianno,et al.  Innovations With 3‐Dimensional Printing in Physical Medicine and Rehabilitation: A Review of the Literature , 2016, PM & R : the journal of injury, function, and rehabilitation.

[21]  D. Gu.  Materials creation adds new dimensions to 3D printing , 2016 .

[22]  Lixin Wu,et al.  Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing , 2016 .

[23]  Abdul W. Basit,et al.  Stereolithographic (SLA) 3D printing of oral modified-release dosage forms. , 2016, International journal of pharmaceutics.

[24]  Sunpreet Singh,et al.  Development of ABS based wire as feedstock filament of FDM for industrial applications , 2016 .

[25]  Yaoyao Fiona Zhao,et al.  A survey of the design methods for additive manufacturing to improve functional performance , 2016 .

[26]  J. Oliveira,et al.  Rheological behaviour of cork-polymer composites for injection moulding , 2016 .

[27]  J. Aurrekoetxea,et al.  The effect of process parameters on ultraviolet cured out of die bent pultrusion process , 2016 .

[28]  A. Marques,et al.  Pultrusion of fibre reinforced thermoplastic pre-impregnated materials , 2016 .

[29]  A. Todoroki,et al.  Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation , 2016, Scientific Reports.

[30]  Omar Ahmed Mohamed,et al.  Optimization of fused deposition modeling process parameters for dimensional accuracy using I-optimality criterion , 2016 .

[31]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[32]  Xiaohong Qin,et al.  Additive manufacturing of multi-directional preforms for composites: opportunities and challenges , 2015 .

[33]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[34]  Gershon Elber,et al.  Orientation analysis of 3D objects toward minimal support volume in 3D-printing , 2015, Comput. Graph..

[35]  Charlie C. L. Wang,et al.  Support slimming for single material based additive manufacturing , 2015, Comput. Aided Des..

[36]  F. Piller,et al.  Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited , 2015 .

[37]  Ryan B. Wicker,et al.  Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing , 2015 .

[38]  Leyland Pitt,et al.  Disruptions, decisions, and destinations: enter the age of 3-D printing and additive manufacturing , 2015, IEEE Engineering Management Review.

[39]  S. Setunge,et al.  Bond characterization of adhesively bonded joints made with the resin infusion (RI) process , 2015 .

[40]  Jaroslaw Kotlinski,et al.  Mechanical properties of commercial rapid prototyping materials , 2014 .

[41]  Anton J.M. Schoot Uiterkamp,et al.  A global sustainability perspective on 3D printing technologies , 2014 .

[42]  Yong He,et al.  Optimization of tool-path generation for material extrusion-based additive manufacturing technology ☆ , 2014 .

[43]  David Chapelle,et al.  Unified approach of filament winding applied to complex shape mandrels , 2014 .

[44]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[45]  K. Zeng,et al.  Electrical and mechanical properties of ABS/EPDM composites filled with carbon black , 2014 .

[46]  Z. Zhang,et al.  Hot compaction and mechanical properties of ramie fabric/epoxy composite fabricated using vacuum assisted resin infusion molding , 2014 .

[47]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[48]  P. Dudek,et al.  FDM 3D Printing Technology in Manufacturing Composite Elements , 2013 .

[49]  Edwin Chica,et al.  Lost wax casting process of the runner of a propeller turbine for small hydroelectric power plants , 2013 .

[50]  A. Bandyopadhyay,et al.  Bone tissue engineering using 3D printing , 2013 .

[51]  Adam Huang,et al.  Fatigue analysis of FDM materials , 2013 .

[52]  J. Shim,et al.  Amputee locomotion: determining the inertial properties of running-specific prostheses. , 2013, Archives of Physical Medicine and Rehabilitation.

[53]  Hugh M. Herr,et al.  A Variable-Impedance Prosthetic Socket for a Transtibial Amputee Designed from Magnetic Resonance Imaging Data , 2013 .

[54]  Vamsi K. Yadavalli,et al.  Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices , 2013 .

[55]  Mike McNamee,et al.  Challenging human and sporting boundaries: The case of Oscar Pistorius , 2012 .

[56]  Sidi M. Berri,et al.  The Bearing Strength of Pin Loaded Woven Composites Manufactured by Vacuum Assisted Resin Transfer Moulding and Hand Lay-Up Techniques , 2012 .

[57]  Ming Liu,et al.  A Prototype for Smart Prosthetic Legs-Analysis and Mechanical Design , 2011 .

[58]  Hirpa G. Lemu,et al.  3D Printing for Rapid Manufacturing: Study of Dimensional and Geometrical Accuracy , 2011, APMS.

[59]  Ehud Kroll,et al.  Enhancing aerospace engineering students' learning with 3D printing wind‐tunnel models , 2011 .

[60]  Nicolas Vuillerme,et al.  Biomechanics and physiological parameters during gait in lower-limb amputees: a systematic review. , 2011, Gait & posture.

[61]  J. W. Howard,et al.  Composite sandwich structures with rapid prototyped cores , 2011 .

[62]  L. Klenerman,et al.  The Jaipur foot. , 2008, The Journal of bone and joint surgery. British volume.

[63]  S. Milz,et al.  Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing , 2005, Journal of materials science. Materials in medicine.

[64]  H. Awaji,et al.  Fabrication on porous alumina tube by centrifugal molding , 2005 .

[65]  Барри Таусенсенд,et al.  The prosthetic foot , 2005 .

[66]  Dong Guo,et al.  Solid freeform fabrication of alumina ceramic parts through a lost mould method , 2003 .

[67]  H. Awaji,et al.  Processing of mullite–molybdenum graded hollow cylinders by centrifugal molding technique , 2003 .

[68]  L. Froyen,et al.  Lasers and materials in selective laser sintering , 2002 .

[69]  P. Wright,et al.  Anisotropic material properties of fused deposition modeling ABS , 2002 .

[70]  Joan E Sanders,et al.  Energy storage and return prostheses: does patient perception correlate with biomechanical analysis? , 2002, Clinical biomechanics.

[71]  Peter K. L. Ng,et al.  Prosthetic sockets fabrication using rapid prototyping technology , 2002 .

[72]  Neil Hopkinson,et al.  Rapid prototyping for direct manufacture , 2001 .

[73]  J. David Carlson,et al.  Smart prosthetics based on magnetorheological fluids , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[74]  H. Thomas Hahn,et al.  Characterization of the laminated object manufacturing (LOM) process , 2000 .

[75]  Duc Truong Pham,et al.  A comparison of rapid prototyping technologies , 1998 .

[76]  Michael J. Cima,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .

[77]  S. R. D. Roscoat,et al.  3D in situ observations of the compressibility and pore transport in Sheet Moulding Compounds during the early stages of compression moulding , 2017 .

[78]  Shigeru Obayashi,et al.  Multi-objective optimization for resin transfer molding process , 2017 .

[79]  Yaodong Xu,et al.  Experimental Study of ABS Material Shrinkage and Deformation Based on Fused Deposition Modeling , 2016 .

[80]  Thierry Rayna,et al.  From rapid prototyping to home fabrication: How 3D printing is changing business model innovation , 2016 .

[81]  Franz Konstantin Fuss,et al.  Effect of different mounting angles of prosthetic feet dedicated to sprinting on reaction forces , 2016 .

[82]  E. García-Plaza,et al.  Dimensional and Surface Texture Characterization in Fused Deposition Modelling (FDM) with ABS plus , 2015 .

[83]  B. Satyanarayana,et al.  Component Replication Using 3D Printing Technology , 2015 .

[84]  Albert J. Shih,et al.  Additive Manufacturing of Custom Orthoses and Prostheses – A Review☆ , 2015 .

[85]  Priscila Rodrigues Fernandes,et al.  Ergonomics Management with a Proactive Focus , 2015 .

[86]  Yaoyao Fiona Zhao,et al.  Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes , 2014 .

[87]  Jens P. Wulfsberg,et al.  Combination of Carbon Fibre Sheet Moulding Compound and Prepreg Compression Moulding in Aerospace Industry , 2014 .

[88]  Kotresh M. Gaddikeri,et al.  Challenges in Processing of a Cocured Wing Test Box Using Vacuum Enhanced Resin Infusion Technology (VERITy) , 2014 .

[89]  Hiroaki Hobara,et al.  Amputee locomotion: lower extremity loading using running-specific prostheses. , 2014, Gait & posture.

[90]  Pranjal Jain,et al.  ScienceDirect The Manufacturing Engineering Society International Conference , MESIC 2013 Feasibility Study of manufacturing using rapid prototyping : FDM Approach , 2013 .

[91]  G. Wypych.  ABS poly(acrylonitrile-co-butadiene-co-styrene) , 2012 .

[92]  Piaras Kelly,et al.  Compression resin transfer moulding (CRTM) in polymer matrix composites , 2012 .

[93]  A. Poursartip,et al.  Autoclave processing for composites , 2012 .

[94]  Suresh G. Advani,et al.  Manufacturing techniques for polymer matrix composites (PMCs) , 2012 .

[95]  C. P. Sharma.  Biointegration of Medical Implant Materials , 2010 .

[96]  Lee Nolan,et al.  Carbon fibre prostheses and running in amputees: a review. , 2008, Foot and ankle surgery : official journal of the European Society of Foot and Ankle Surgeons.