Development of wireless sensor network for combustible gas monitoring

a b s t r a c t This paper describes the development and the characterization of a wireless gas sensor network (WGSN) for the detection of combustible or explosive gases. The WGSN consists of a sensor node, a relay node, a network coordinator, and a wireless actuator. The sensor node attains early gas detection using an on board 2D semiconductor sensor. Because the sensor consumes a substantial amount of power, which negatively affects the node lifetime, we employ a pulse heating profile to achieve significant energy savings. The relay node receives and forwards traffic from sensor nodes towards the network coordinator and vice versa. When an emergency is detected, the network coordinator alarms an operator through the GSM/GPRS or Ethernet network, and may autonomously control the source of gas emission through the wireless actuator. Our experimental results demonstrate how to determine the optimal temperature of the sensor's sensitive layer for methane detection, show the response time of the sensor to various gases, and evaluate the power consumption of the sensor node. The demonstrated WGSN could be used for a wide range of gas monitoring applications.

[1]  R. G. Pavelko,et al.  Alumina MEMS Platform for Impulse Semiconductor and IR Optic Gas Sensors , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[2]  S. So,et al.  LaserSPECks: Laser SPECtroscopic Trace-Gas Sensor Networks - Sensor Integration and Applications , 2007, 2007 6th International Symposium on Information Processing in Sensor Networks.

[3]  V. V. Malyshev,et al.  Dynamic properties and sensitivity of semiconductor metal-oxide thick-film sensors to various gases in air gaseous medium , 2003 .

[4]  Chee-Yee Chong,et al.  Sensor networks: evolution, opportunities, and challenges , 2003, Proc. IEEE.

[5]  Zhencai Zhu,et al.  Energy-Efficient Chain-Type Wireless Sensor Network for Gas Monitoring , 2009, 2009 Second International Conference on Information and Computing Science.

[6]  Sang Jin Lee,et al.  Wireless electronic nose network for real-time gas monitoring system , 2009, 2009 IEEE International Workshop on Robotic and Sensors Environments.

[7]  Dermot Diamond,et al.  Landfill Gas Monitoring at Borehole Wells using an Autonomous Environmental Monitoring System , 2008 .

[8]  K. Tsukada,et al.  Hydrogen gas detection system prototype with wireless sensor networks , 2005, IEEE Sensors, 2005..

[9]  Roberto Passerone,et al.  Combustible gases and early fire detection: an autonomous system for wireless sensor networks , 2010, e-Energy.

[10]  Dennis P. Nolan.  Handbook of Fire and Explosion Protection Engineering Principles: for Oil, Gas, Chemical and Related Facilities , 1997 .

[11]  D. Diamond,et al.  Evaluation of a low cost wireless chemical sensor network for environmental monitoring , 2008, 2008 IEEE Sensors.

[12]  O. Berger,et al.  Miniaturized gas monitoring system employing several SAW sensors , 2001, Proceedings of the 2001 IEEE International Frequncy Control Symposium and PDA Exhibition (Cat. No.01CH37218).

[13]  Kandeepan Sithamparanathan,et al.  Energy Efficient Trade-Off between Communication and Sensing in Wireless Gas Sensor Node , 2010, MobiMedia.

[14]  Xiaoqiang Zhao,et al.  Development of Remote Waste Gas Monitor System , 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

[15]  Anuj Kumar,et al.  Indoor environment gas monitoring system based on the digital signal processor , 2009, 2009 International Multimedia, Signal Processing and Communication Technologies.