Analytical characterization and experimental validation of performances of piezoelectric vibration energy scavengers

One of the main requirements in wireless sensor operation is the availability of autonomous power sources sufficiently compact to be embedded in the same housing and, when the application involves living people, wearable. A possible technological solution satisfying these needs is energy harvesting from the environment. Vibration energy scavenging is one of the most studied approaches in this frame. In this work the conversion of kinetic into electric energy via piezoelectric coupling in resonant beams is studied. Various design approaches are analyzed and relevant parameters are identified. Numerical methods are applied to stress and strain analyses as well as to evaluate the voltage and charge generated by electromechanical coupling. The aim of the work is increasing the specific power generated per unit of scavenger volume by optimizing its shape. Besides the conventional rectangular geometry proposed in literature, two trapezoidal shapes, namely the direct and the reversed trapezoidal configuration, are analyzed. They are modeled to predict their dynamic behavior and energy conversion performance. Analytical and FEM models are compared and resulting figures of merit are drawn. Results of a preliminary experimental validation are also given. A systematic validation of characteristic specimens via an experimental campaign is ongoing.

[1]  Paul K. Wright,et al.  A piezoelectric vibration based generator for wireless electronics , 2004 .

[2]  D. Guyomar,et al.  Toward energy harvesting using active materials and conversion improvement by nonlinear processing , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[3]  G. Genta.  Vibration of structures and machines , 1993 .

[4]  Daniel J. Inman,et al.  Energy Harvesting Technologies , 2008 .

[5]  Stefano Carabelli,et al.  Electromechanical Tuning of Self-Sensing Piezoelectric Transducers , 1998 .

[6]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[7]  Jan M. Rabaey,et al.  Improving power output for vibration-based energy scavengers , 2005, IEEE Pervasive Computing.

[8]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[9]  Joseph A. Paradiso,et al.  Energy scavenging for mobile and wireless electronics , 2005, IEEE Pervasive Computing.

[10]  Leonard Meirovitch,et al.  Dynamics And Control Of Structures , 1990 .

[11]  George P. Simon,et al.  Characterization of mechanical vibration damping by piezoelectric materials , 1996 .

[12]  Joseph A. Paradiso,et al.  Human Generated Power for Mobile Electronics , 2004 .

[13]  T. L. Z. O. J. and.  Piezoelectric ceramics characterization , 2001 .

[14]  M.H.W. Bonse.  Capacitive Position Transducers: Theoretical Aspects and Practical Applications , 1995 .

[15]  Sumi Helal,et al.  The Engineering Handbook of Smart Technology for Aging, Disability, and Independence , 2008 .

[16]  Daniel J. Inman,et al.  On the optimal energy harvesting from a vibration source using a PZT stack , 2009 .

[17]  S. M. Shahruz,et al.  Limits of performance of mechanical band-pass filters used in energy scavenging , 2006 .