Emitter ballasting resistor design for, and current handling capability of AlGaAs/GaAs power heterojunction bipolar transistors

A systematic investigation of the emitter ballasting resistor for power heterojunction bipolar transistors (HBTs) is presented. The current handling capability of power HBTs is found to improve with ballasting resistance. An equation for the optimal ballasting resistance is presented, where the effects of thermal conductivity of the substrate material and the temperature coefficient of the ballasting resistor are taken into account. Current levels of 400 to 800 mA/mm of emitter periphery at case temperatures of 25 to -80 degrees C for power AlGaAs/GaAs HBTs have been obtained using an on-chip lightly doped GaAs emitter ballasting resistor. Device temperature has been measured using both an infrared microradiometer and temperature-sensitive electrical parameters. Steady-state and transient thermal modeling are also performed. Although the measured temperature is spatially nonuniform, the modeling results show that such nonuniformities would occur for a uniform current distribution, as would be expected for an HBT with emitter ballasting resistors. >

[1]  David J. Roulston,et al.  Design study of AlGaAs/GaAs HBTs , 1990 .

[2]  C. T. Kirk,et al.  A theory of transistor cutoff frequency (fT) falloff at high current densities , 1962, IRE Transactions on Electron Devices.

[3]  H. Morkoç,et al.  Thermal design studies of high-power heterojunction bipolar transistors , 1989 .

[4]  F. Bergmann,et al.  Some new aspects of thermal instability of the current distribution in power transistors , 1966 .

[5]  P. Asbeck,et al.  High power GaAlAs/GaAs HBTs for microwave applications , 1987, 1987 International Electron Devices Meeting.

[6]  R. P. Arnold,et al.  A quantitative study of emitter ballasting , 1974 .

[7]  D.L. Blackburn,et al.  Thermal characterization of power transistors , 1976, IEEE Transactions on Electron Devices.

[8]  TXYZ a program for semiconductor IC thermal analysis , 1984 .

[9]  R. Rosenzweig,et al.  Design of a VHF power transistor with second-breakdown protection , 1965 .

[10]  David L. Blackburn,et al.  An Electrical Technique for the Measurement of the Peak Junction Temperature of Power Transistors , 1975, 13th International Reliability Physics Symposium.

[11]  H. Morkoç,et al.  Extremely low resistance nonalloyed ohmic contacts on GaAs using InAs/InGaAs and InAs/GaAs strained-layer superlattices , 1988 .

[12]  Michael S. Shur,et al.  Gaas Devices And Circuits , 1987 .

[13]  D. Tremere,et al.  Current gain and cutoff frequency falloff at high currents , 1969 .

[14]  S. M. Sze,et al.  Physics of semiconductor devices , 1969 .