Enhanced Dewatering of Waste Sludge With Polyacrylamide/Montmorillonite Composite and Its Conditioning Mechanism

In order to improve the waste sludge dewaterability of polyacrylamide (PAM), the composite conditioner of PAM/montmorillonite (MMT) was prepared. The structure and intermolecular hydrogen bonding of the composite were studied, and the effects of PAM/MMT weight ratio and dosage on the dewaterability of the waste sludge were systematically investigated. The results revealed that the MMT platelets were in an exfoliated state in the PAM matrix, and hydrogen bonding between –OH groups of MMT and –NH groups of PAM led to relatively high elastic modulii (G') values and low tan δ values, indicating the possible formation of a physically cross-linked network in aqueous solution. The addition of MMT significantly reduced the specific resistance to filtration (SRF) of the waste sludge, with a minimum value being achieved at a 1:1 PAM/MMT weight ratio. The UV transmittance and the turbidity of the supernatant of the waste sludge were also improved at a proper PAM/MMT weight ratio. The synergistic effect of the two components in the composite through the charge neutrality and bridging action of PAM as well as the adsorption capacity of MMT resulted in an enhanced dewaterability of waste sludge.

[1]  Khai Ern Lee,et al.  Comparative study on the effectiveness of hydrophobically modified cationic polyacrylamide groups in the flocculation of kaolin , 2011 .

[2]  Meifang Zhu,et al.  Preparation and Property of Poly(N-isopropylacrylamide) (PNIPAAm)/Clay/Linear Polyacrylamide (PAAm) Nanocomposite Hydrogels , 2010 .

[3]  S. Xia,et al.  Enhanced dewatering of waste sludge with microbial flocculant TJ-F1 as a novel conditioner. , 2010, Water research.

[4]  K. Thapa,et al.  Lignite aided dewatering of digested sewage sludge. , 2009, Water research.

[5]  Li-Ming Shao,et al.  Stratification structure of sludge flocs with implications to dewaterability. , 2008, Environmental science & technology.

[6]  A. Rahmatpour,et al.  Preparation and Swelling Behavior of Partially Hydrolyzed Polyacrylamide Nanocomposite Hydrogels in Electrolyte Solutions , 2007 .

[7]  A. James,et al.  The effect of polyacrylamide charge density and molecular weight on the flocculation and sedimentation behaviour of kaolinite suspensions , 2006 .

[8]  W. Ming,et al.  Polymer−Clay Nanocomposite Latex Particles by Inverse Pickering Emulsion Polymerization Stabilized with Hydrophobic Montmorillonite Platelets , 2006 .

[9]  M. Kaneko,et al.  Melt intercalation of poly(l-lactide) chains into clay galleries , 2005 .

[10]  Eric Elliott,et al.  Mechanism of Forming Organic/Inorganic Network Structures during In-situ Free-Radical Polymerization in PNIPA−Clay Nanocomposite Hydrogels , 2005 .

[11]  M. Osman,et al.  Tensile properties of polyethylene-layered silicate nanocomposites , 2005 .

[12]  G. Camino,et al.  EVA‐Montmorillonite Nanocomposites: Effect of Processing Conditions , 2004 .

[13]  Toru Takehisa,et al.  Effects of Clay Content on the Properties of Nanocomposite Hydrogels Composed of Poly(N-isopropylacrylamide) and Clay , 2002 .

[14]  Toru Takehisa,et al.  Nanocomposite Hydrogels: A Unique Organic–Inorganic Network Structure with Extraordinary Mechanical, Optical, and Swelling/De‐swelling Properties , 2002 .

[15]  I. Chung,et al.  Synthesis of exfoliated polyacrylonitrile/Na-MMT nanocomposites via emulsion polymerization , 2002 .

[16]  S. Kim,et al.  Synthesis of exfoliated PMMA/Na-MMT nanocomposites via soap-free emulsion polymerization , 2001 .

[17]  G. Gu,et al.  Effect of acid and surfactant treatment on activated sludge dewatering and settling. , 2001, Water research.

[18]  R. Dick,et al.  Specific Resistance Measurements: Methods and Procedures , 1985 .