Performance Improvement of the IPMSM Position Sensor-less Vector Control System by the On-line Motor Parameter Error Compensation and the Practical Dead-time Compensation

This paper proposes the performance improvement methods for the IPMSM position sensor-less vector control system. The stability of the position sensor-less control is influenced by the motor parameter error and dead time compensation error. Especially, it becomes problem in case of the extreme temperature variation and at low speed. The influence on the position estimation is analyzed for the proposed method which using an armature current flux adaptive observer. For performance improvement and simplification of control system, the offline parameter measurement of a stator resistance, permanent magnet flux, d,q-axis inductances, and dead-time compensation are proposed. And the on-line parameter error compensation method is applied to reduce the position error, which uses only the observer signal without any additional sensor or signal injection. In addition, the practical dead-time compensation method is proposed based on the experimental measurement. Experimental results of the test system using the proposed methods showed good performance.

[1]  Shigeo Morimoto,et al.  Position and speed sensorless control system of permanent magnet synchronous motor with parameter identification , 2007 .

[2]  M. Ehsani,et al.  A novel position sensor elimination technique for the interior permanent-magnet synchronous motor drive , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[3]  Shinji Doki,et al.  Sensorless Controls of Salient-Pole Permanent Magnet Synchronous Motors Using Extended Electromotive Force Models , 2002 .

[4]  Hiroshi Watanabe,et al.  DC-Brushless Servo System Without Rotor Position And Speed Sensor , 1987, Other Conferences.

[5]  Kiyoshi Sakamoto,et al.  A Simplified Vector Control of Position Sensorless Permanent Magnet Synchronous Motor for Electrical Household Appliances , 2004 .

[6]  R. D. Lorenz,et al.  Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speeds , 1998 .

[7]  M. J. Corley,et al.  Rotor position and velocity estimation for a permanent magnet synchronous machine at standstill and high speeds , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[8]  Shigeo Morimoto,et al.  Position and speed sensorless control system of permanent magnet synchronous motor with parameter identification , 2007 .

[9]  Takaharu Takeshita Back EMF Estimation-Based Sensorless Salient-Pole Brushless DC Motor Drives , 1997 .

[10]  Tomonobu Senjyu,et al.  On-line dead-time compensation method for permanent magnet synchronous motor drive , 2002, 2002 IEEE International Conference on Industrial Technology, 2002. IEEE ICIT '02..