A very simple empirical kinetic model of the acid‐catalyzed cure of urea–formaldehyde resins
暂无分享,去创建一个
[1] C. Costa,et al. Modeling Rheology In The Hot-Pressing Of MDF: Comparison Of Mechanical Models , 2007 .
[2] F. Tüdős,et al. DSC application for characterization of Urea/formaldehyde condensates , 1993, Holz als Roh- und Werkstoff.
[3] T. Mejdell,et al. Simulation model for urea-formaldehyde reactors , 2004 .
[4] C. Hse,et al. Formaldehyde emission and high-temperature stability of cured urea-formaldehyde resins , 2000, Journal of Wood Science.
[5] C. Costa,et al. A global model for the hot-pressing of MDF , 2003, Wood Science and Technology.
[6] O. Maslosh,et al. Influence of Process Factors on the Structure of Urea-Formaldehyde Resin , 2003 .
[7] Alkiviadis S. Paipetis,et al. Use of NIR for structural characterization of urea–formaldehyde resins , 2003 .
[8] S. M. Lee,et al. Examination of selected synthesis and room‐temperature storage parameters for wood adhesive‐type urea–formaldehyde resins by 13C‐NMR spectroscopy. V , 2001 .
[9] Moon G. Kim. Examination of selected synthesis parameters for typical wood adhesive-type urea–formaldehyde resins by 13C-NMR spectroscopy. II , 2000 .
[10] A. Krutov,et al. Relativistic properties of spin and pion electromagnetic structure , 1999 .
[11] T. Pehk,et al. Study of the structural changes in urea‐formaldehyde condensates during synthesis , 1999 .
[12] A. Pizzi,et al. Uron and uron–urea-formaldehyde resins , 1999 .
[13] Moon G. Kim. Examination of selected synthesis parameters for typical wood adhesive‐type urea–formaldehyde resins by 13C NMR spectroscopy. I , 1999 .
[14] A. Pizzi. On the correlation equations of liquid and solid 13C‐NMR, thermomechanical analysis, Tg, and network strength in polycondensation resins , 1999 .
[15] A. S. Hay,et al. M.A.L.D.I.-T.O.F. mass spectrometry characterization of 4-alkyl substituted phenol-formaldehyde novalac type resins , 1997 .
[16] J. Valenzuela,et al. Theory and Practice of the Preparation of Low Formaldehyde Emission UF Adhesives , 1994 .
[17] A. Pizzi,et al. Wood‐induced catalytic activation of PF adhesives autopolymerization vs. PF/wood covalent bonding , 1994 .
[18] G. Maciel,et al. NMR study of the stabilities of urea–formaldehyde resin components toward hydrolytic treatments , 1994 .
[19] G. E. Myers,et al. Behavior of Amine-Modified Urea-Formaldehyde-Bonded Wood Joints at low Formaldehyde/ Urea Molar Ratios , 1994 .
[20] S. Yin. Caractérisation par analyses thermiques de la polycondensation d'adhésifs aminoplastes et du durcissement de composites modèles bois-adhésif , 1994 .
[21] C. Hse,et al. Effects of Reaction pH on Properties and Performance of Urea-Formaldehyde Resins , 1994 .
[22] P. Hendra,et al. The Raman spectra of polymers , 1993 .
[23] Catherine Martin-Biegalke. Dégradation par l'eau et la chaleur des résines urée-formol , 1993 .
[24] Amitesh Kumar,et al. Modeling of polymerization of urea and formaldehyde using functional group approach , 1990 .
[25] S. Jada. Solid-State 13C-NMR Studies of Uncured Urea-Formaldehyde Resins , 1990 .
[26] Moon G. Kim,et al. Quantitative carbon-13 NMR study of urea-formaldehyde resins in relation to the formaldehyde emission levels , 1990 .
[27] M. Dunky,et al. Untersuchung der molmassenverteilung von harnstoff‐formaldehyd‐leimharzen durch GPC gekoppelt mit lichtstreuung , 1990 .
[28] G. E. Myers,et al. Formaldehyde Liberation and Cure Behavior of Urea-Formaldehyde Resins , 1990 .
[29] A. Dunker,et al. The Chemical Structure of UF Resins , 1986 .
[30] G. E. Myers,et al. Raman spectroscopy of urea–formaldehyde resins and model compounds , 1984 .
[31] D. Braun,et al. Model compounds for the urea‐formaldehyde condensation. 1. Methylenediurea , 1983 .
[32] G. E. Myers,et al. Carbon-13 NMR studies of solid urea-formaldehyde resins using cross polarization and magic-angle spinning , 1983 .
[33] G. E. Myers. Investigation of urea–formaldehyde polymer cure by infrared , 1981 .
[34] S. Katuščák,et al. Kinetics of polycondensation of urea with formaldehyde. Molecular weight distribution, average molecular weight, and polydispersity parameters , 1981 .
[35] A. R. Cooper,et al. Urea–formaldehyde reaction system. An experimental investigation , 1980 .
[36] B. Tomita,et al. Urea-formaldehyde resins. III. Constitutional characterization by 13C fourier transform NMR spectroscopy , 1978 .
[37] J. Ebdon,et al. Characterization of urea-formaldehyde adducts and resins by 13C-n.m.r. spectroscopy , 1977 .
[38] P. Steiner,et al. Catalytic, Exothermic Reactions of Urea-Formaldehyde Resin , 1975 .
[39] B. Thorell,et al. On the Reaction between Urea and Formaldehyde in Neutral and Alkaline Solutions. VI. Experimental Studies of the Activation Energy and the Heat of Reaction. , 1956 .
[40] J. D. Jonge,et al. Kinetics of the formation of methylene linkages in solutions of urea and formaldehyde , 2010 .
[41] H. Kadowaki. NEW COMPOUNDS OF UREA-FORMALDEHYDE CONDENSATION PRODUCTS , 1936 .