Numerical study of the impact of windblown sand particles on a high-speed train

Abstract This study develops an approach to evaluate the effect of particle impacts on the motion of high-speed trains in a sand-laden flow. For this purpose, external routines were implemented to extend the Discrete Phase Model (DPM) of the commercial simulation code ANSYS Fluent. Although the aerodynamics is an established concern in the design of high-speed trains, relatively few studies investigate the response of trains to demanding environments such as deserts. Several of the derived problems include potential effects on the aerodynamic performance or the wear of materials. Simulations with different values for the particle diameter, particle load and coefficient of restitution were performed. The analysis of the leading vehicle shows a greater impact probability on the train nose with small impact angles and high velocities on the sides, leading to a more pronounced wear of the surface. A logarithmic dependency of the drag coefficient with the particle diameter was also revealed, and a force reduction of 10% for each 0.2 decrease in the coefficient of restitution was noted. The results of the simulations confirm the feasibility of the presented methodology.

[1]  John Sheridan,et al.  Wind tunnel analysis of the slipstream and wake of a high-speed train , 2014 .

[2]  J. Meseguer,et al.  On the effects of windbreaks on the aerodynamic loads over parabolic solar troughs , 2014 .

[3]  R Gawthorpe.  PRESSURE EFFECTS IN RAILWAY TUNNELS , 2000 .

[4]  Sinisa Krajnovic,et al.  LES study of the influence of the nose shape and yaw angles on flow structures around trains , 2010 .

[5]  Dan S. Henningson,et al.  Flow structures around a high-speed train extracted using Proper Orthogonal Decomposition and Dynamic Mode Decomposition , 2012 .

[6]  A Schetz,et al.  AERODYNAMICS OF HIGH-SPEED TRAINS , 2003 .

[7]  Javier García,et al.  Study of the flow between the train underbody and the ballast track , 2011 .

[8]  Weihong Qian,et al.  Variations of the Dust Storm in China and its Climatic Control , 2002 .

[9]  John A. Gillies,et al.  Dust concentrations and particle-size characteristics of an intense dust haze event: Inland Delta Region, Mali, West Africa , 1996 .

[10]  Stefan Heinrich,et al.  Energy absorption during compression and impact of dry elastic-plastic spherical granules , 2010 .

[11]  James R. Valentine,et al.  A Lagrangian-Eulerian scheme for flow around an airfoil in rain , 1995 .

[12]  Christopher Baker,et al.  The calculation of train slipstreams using large-eddy simulation , 2014 .

[13]  Mikael Sima,et al.  Full-scale measurement and analysis of train slipstreams and wakes. Part 1: Ensemble averages , 2014 .

[14]  Martin Schober,et al.  Slipstream Velocities Induced by Trains , 2006 .

[15]  G. Kuwabara,et al.  Restitution Coefficient in a Collision between Two Spheres , 1987 .

[16]  Prachi Middha,et al.  Collisions between particles in multiphase flows: Focus on contact mechanics and heat conduction , 2014 .

[17]  Daniele Rocchi,et al.  Aerodynamic behaviour investigation of the new EMUV250 train to cross wind , 2010 .

[18]  Nobuo Sugimoto,et al.  Spatial and temporal variations of dust concentrations in the Gobi Desert of Mongolia , 2011 .

[19]  Toshiaki Setoguchi,et al.  Aerodynamics of high-speed railway train , 2002 .

[20]  Christopher Baker,et al.  A review of train aerodynamics Part 2 – Applications , 2014, The Aeronautical Journal (1968).

[21]  Christine M. Hrenya,et al.  Comparison of soft-sphere models to measurements of collision properties during normal impacts , 2005 .

[22]  John R. Pugh,et al.  Investigation of the parameters important in the measurement of small particle impact forces , 2015 .

[23]  David Soper,et al.  Detached-eddy simulation of the slipstream of an operational freight train , 2014 .

[24]  Christopher Baker,et al.  The flow around high speed trains , 2010 .

[25]  Yung-Yen Ko,et al.  Field measurements of aerodynamic pressures in tunnels induced by high speed trains , 2012 .

[26]  Andrew Quinn,et al.  Gusts caused by high-speed trains in confined spaces and tunnels , 2013 .

[27]  Qingyan Chen,et al.  Comparison of the Eulerian and Lagrangian methods for predicting particle transport in enclosed spaces , 2007 .

[28]  Mathias Wintzer,et al.  Adjoint-Based Adaptive Mesh Refinement for Complex Geometries , 2008 .

[29]  Tomas W. Muld.  Slipstream and Flow Structures in the Near Wake of High-Speed Trains , 2012 .

[30]  Zhibao Dong,et al.  Experimental investigation of the concentration profile of a blowing sand cloud , 2004 .

[31]  G. Jing,et al.  Ballast Flying Mechanism and Sensitivity Factors Analysis , 2012 .

[32]  M. Sommerfeld,et al.  Multiphase Flows with Droplets and Particles , 2011 .

[33]  Olivier Simonin,et al.  Comparison between Lagrangian and mesoscopic Eulerian modelling approaches for inertial particles suspended in decaying isotropic turbulence , 2008, J. Comput. Phys..

[34]  Christopher Baker,et al.  A review of train aerodynamics Part 1 – Fundamentals , 2014, The Aeronautical Journal (1968).

[35]  Tiedo Tinga,et al.  Investigating the influence of sand particle properties on abrasive wear behaviour , 2012 .

[36]  Hong-bing Xiong,et al.  Numerical study on the aerodynamic performance and safe running of high-speed trains in sandstorms , 2011 .