Cast Iron Machine Tool Body Analysis: The Theoretical and Experimental Approach

The paper presents theoretical and experimental modal analysis of the machine tool lathe body made of cast iron. Modal analysis is commonly used in practice as a technique for determining the dynamic properties of objects. The aim of the work was to compare the theoretically obtained results with experimental research. The modal analyses both theoretical and experimental were conducted in frequency domain in range from 0 to 1600 Hz. Results from theoretical modal analysis were highly convergent with experimental studies. This verification of theoretical model with experimental results gave justified basis to conduct the research based on verified model. The model could be subsequently applied to perform simulations of the analyzed body behavior in the conditions which were not examined experimentally. On this basis, the conclusions about dynamic behavior of the analyzed object were formulated.

[1]  Young Pil Park,et al.  MODAL CHARACTERISTIC ANALYSIS OF THE APR1400 NUCLEAR REACTOR INTERNALS FOR SEISMIC ANALYSIS , 2014 .

[2]  C. Brutti,et al.  Modal shape identification of large structure exposed to wind excitation by operational modal analysis technique , 2013 .

[3]  Hee-Chang Eun,et al.  Finite element modal analysis and vibration-waveforms in health inspection of old bridges , 2014 .

[4]  Mitsuyasu Matsuo,et al.  High-speed test of thermal effects for a machine-tool structure based on modal analysis , 1986 .

[5]  Bin Li,et al.  Estimation of CNC machine–tool dynamic parameters based on random cutting excitation through operational modal analysis , 2013 .

[6]  Y. M. Huang,et al.  Predicting dynamic behaviours of a whole machine tool structure based on computer-aided engineering , 2003 .

[7]  A Study on Modal Parameters of Cylindrical Grinding Machine Structure through Experimental Test and FEM , 2013 .

[8]  Pascal Ray,et al.  Modal identification of spindle-tool unit in high-speed machining , 2011 .

[9]  J. Skočilas,et al.  A Combined Numerical and Modal Analysis on Vertical Vibration Response of Railway Vehicle , 2014 .

[10]  Mehran Mahboubkhah,et al.  Modal analysis of the vertical moving table of 4-DOF parallel machine tool by FEM and experimental test , 2017 .

[11]  Victor Songmene,et al.  Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis , 2009 .

[12]  Jean-Loïc Le Carrou,et al.  Operational modal analysis applied to the concert harp , 2015 .

[13]  Christian Brecher,et al.  Experimental modal analysis using a tracking interferometer , 2014 .

[14]  Saeed Ziaei-Rad,et al.  Vibration modeling and modification of cutting platform in a harvest combine by means of operational modal analysis (OMA) , 2013 .

[15]  Mehran Mahboubkhah,et al.  Modal Analysis of the Milling Machine Structure through FEM and Experimental Test , 2011 .

[16]  Aitzol Lamikiz,et al.  Machine Tools for High Performance Machining , 2009 .