Optimization of passive control performance for different hard disk drives subjected to shock excitation

Laptop personal computers (LPCs) and their components are vulnerable devices in harsh mechanical environments. One of the most sensitive components of LPCs is hard disk drive (HDD) which needs to be protected against damages attributable to shock and vibration in order to have better magnetic read/write performance. In the present work, a LPC and its HDD are modeled as two degrees of freedom system and the nonlinear optimization method is employed to perform a passive control through minimizing peak of HDD absolute acceleration caused by a base shock excitation. The presented shock excitation is considered as half-sine pulse of acceleration. In addition, eleven inequality constraints are defined based on geometrical limitations and allowable intervals of lumped modal parameters. The target of the optimization is to reach optimum modal parameters of rubber mounts and rubber feet as design variables and subsequently propose new characteristics of rubber mounts and rubber feet to be manufactured for the HDD protection against shock excitation. The genetic algorithm and the modified constrained steepest descent algorithm are employed in order to solve the nonlinear optimization problem for three widely-used commercial cases of HDD. Finally, the results of both optimization methods are compared to make sure about their accuracy.

[1]  Seyed Rashid Alavi,et al.  Experimental investigation on thermal performance of natural draft wet cooling towers employing an innovative wind-creator setup , 2016 .

[2]  No-Cheol Park,et al.  Shock and vibration isolation of laptop hard disk drive using rubber mount , 2012 .

[3]  C. Harris,et al.  Harris' Shock and Vibration Handbook , 1976 .

[4]  Fook Fah Yap,et al.  Design and Analysis of Shock and Random Vibration Isolation of Operating Hard Disk Drive in Harsh Environment , 2009 .

[5]  R. Clough,et al.  Dynamics Of Structures , 1975 .

[6]  John H. Holland,et al.  Adaptation in Natural and Artificial Systems: An Introductory Analysis with Applications to Biology, Control, and Artificial Intelligence , 1992 .

[7]  Seyed Rashid Alavi,et al.  Thermal performance of natural draft wet cooling towers under cross-wind conditions based on experimental data and regression analysis , 2016, 2016 6th Conference on Thermal Power Plants (CTPP).

[8]  Saeed Ziaei-Rad,et al.  A new approach to design safe-supported HDD against random excitation by using optimization of rubbers spatial parameters , 2017 .

[9]  Yoshihiro Ueno,et al.  New type latch for hard disk drive , 2007 .

[10]  Singiresu S. Rao.  Engineering Optimization : Theory and Practice , 2010 .

[11]  Fook Fah Yap,et al.  A more efficient approach for investigation of effect of various HDD components on the shock tolerance , 2007 .

[12]  Frank E. Talke,et al.  Dynamic response of 1-in. form factor disk drives to external shock and vibration loads , 2007 .

[13]  Fook Fah Yap,et al.  Design and analysis of vibration isolation systems for hard disk drives , 2006 .

[14]  Seungchul Lim.  FINITE ELEMENT ANALYSIS OF FLEXURAL VIBRATIONS IN HARD DISK DRIVE SPINDLE SYSTEMS , 2000 .

[15]  Jasbir S. Arora,et al.  Introduction to Optimum Design , 1988 .

[16]  V. P. Agrawal,et al.  Vibration and noise analysis of computer hard disk drives , 2006 .

[17]  Saeed Ziaei-Rad,et al.  Improving the read/write performance of hard disk drives under external excitation sources based on multi-objective optimization , 2017 .

[18]  A. Paykani,et al.  Optimization of suspension system of off-road vehicle for vehicle performance improvement , 2013 .

[19]  Seyed Rashid Alavi,et al.  Experimental investigation on performance enhancement of forced draft wet cooling towers with special emphasis on the role of stage numbers , 2016 .

[20]  Melanie Mitchell,et al.  An introduction to genetic algorithms , 1996 .

[21]  A. Sedaghat,et al.  Experimental study on improving operating conditions of wet cooling towers using various rib numbers of packing , 2016 .

[22]  Frank E. Talke,et al.  Experimental and numerical investigation of shock response in 3.5 and 2.5 in. form factor hard disk drives , 2006 .