Study on the mechanical performance and interface damage of CRTS II slab track with debonding repairment

[1]  Kai Wei,et al.  Influence of cement asphalt mortar debonding on the damage distribution and mechanical responses of CRTS I prefabricated slab , 2020 .

[2]  Xiaopei Cai,et al.  Study on the interlayer debonding and its effects on the mechanical properties of CRTS II slab track based on viscoelastic theory , 2019, Construction and Building Materials.

[3]  M. Aydin,et al.  The investigation of mechanical properties of a structural adhesive via digital image correlation (DIC) technic , 2019, Composites Part B: Engineering.

[4]  A. A. Shuaibu,et al.  Experimental study on evolution of mechanical properties of CRTS III ballastless slab track under fatigue load , 2019, Construction and Building Materials.

[5]  S. Rajan,et al.  Enhancing the predictive capabilities of a composite plasticity model using cohesive zone modeling , 2019, Composites Part A: Applied Science and Manufacturing.

[6]  Kai Wei,et al.  Mechanical property deterioration of the prefabricated concrete slab in mixed passenger and freight railway tracks , 2019, Construction and Building Materials.

[7]  Xiaopei Cai,et al.  Arching mechanism of the slab joints in CRTSII slab track under high temperature conditions , 2019, Engineering Failure Analysis.

[8]  Q.M. Yu,et al.  Analysis of interface delamination in thermal barrier coating system with axisymmetric structure based on corresponding normal and tangential stresses , 2019, Surface and Coatings Technology.

[9]  Chengbiao Cai,et al.  Mechanical property and damage evolution of concrete interface of ballastless track in high-speed railway: Experiment and simulation , 2018, Construction and Building Materials.

[10]  Liang Gao,et al.  Effect of daily changing temperature on the curling behavior and interface stress of slab track in construction stage , 2018, Construction and Building Materials.

[11]  Dan Liu,et al.  Experimental Study on Bond Performances of Track Slab and Mortar Based on DIC Technology , 2018 .

[12]  Chunfa Zhao,et al.  Interface damage analysis of CA mortar layer of the CRTS II ballastless slab track under temperature gradient loads , 2017 .

[13]  Xiaoyu Jiang,et al.  Damage mechanism of slab track under the coupling effects of train load and water , 2016 .

[14]  ChingSeong Tan,et al.  A Review of Surface Deformation and Strain Measurement Using Two-Dimensional Digital Image Correlation , 2016 .

[15]  Li Xiao,et al.  Criteria for repairing damages of CA mortar for prefabricated framework-type slab track , 2016 .

[16]  Sheng-yang Zhu,et al.  Interface damage and its effect on vibrations of slab track under temperature and vehicle dynamic loads , 2014 .

[17]  G. Paulino,et al.  Cohesive Zone Models: A Critical Review of Traction-Separation Relationships Across Fracture Surfaces , 2011 .

[18]  J. L. Högberg,et al.  Constitutive behaviour of mixed mode loaded adhesive layer , 2007 .

[19]  Ulf Stigh,et al.  Specimen proposals for mixed mode testing of adhesive layer , 2006 .

[20]  Jialai Wang,et al.  Cohesive zone model of intermediate crack-induced debonding of FRP-plated concrete beam , 2006 .

[21]  G. Alfano.  On the influence of the shape of the interface law on the application of cohesive-zone models , 2006 .

[22]  P. Camanho,et al.  Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .