Performance Assessment of Tilt-Up Big-Box Buildings Subjected to Extreme Hazards: Tornadoes and Earthquakes

AbstractThis paper investigates the response of tilt-up (referred to as “big-box”) buildings subjected to two extreme hazards to which they have been observed to be susceptible—high winds (tornadoe...

[1]  Dimitrios Vamvatsikos,et al.  Incremental dynamic analysis , 2002 .

[2]  Mahen Mahendran,et al.  Cyclic Pull-out Strength of Steel Roof and Wall Cladding Systems , 1998 .

[3]  D. Darwin,et al.  Statistical Analysis of the Mechanical Properties and Weight of Reinforcing Bars , 2004 .

[4]  Zekeriya Polat,et al.  Fragility analysis of mid-rise R/C frame buildings , 2006 .

[5]  Wayne Stewart,et al.  The seismic design of plywood sheathed shear walls. , 1987 .

[6]  Teoman T Peköz.  Design of Cold-formed Steel Screw Connections , 1990 .

[7]  Paolo Gardoni,et al.  Seismic vulnerability assessment of tilt-up concrete structures , 2015 .

[8]  Robert G. Sexsmith,et al.  Behavior of Embedded Steel Connectors in Concrete Tilt-up Panels , 1998 .

[9]  조효남,et al.  Load & Resistance Factor Design - AISC , Manual of Steel Construction , 2nd Edition - , 1995 .

[10]  John W. Lawson,et al.  Concrete Slender Wall Design - Back to the Future , 2010 .

[11]  Bruce R. Ellingwood,et al.  Performance-Based Engineering of Wood Frame Housing: Fragility Analysis Methodology , 2002 .

[12]  E. Miranda,et al.  Probabilistic estimation of residual drift demands for seismic assessment of multi-story framed buildings , 2010 .

[13]  Murray J. Morrison,et al.  Discussion of “Tornado-Induced Wind Loads on a Low-Rise Building” by F. L. Haan Jr., Vasanth Kumar Balaramudu, and P. P. Sarkar , 2011 .

[14]  Partha P. Sarkar,et al.  Tornado-induced wind loads on a low-rise building , 2010 .

[15]  David O. Prevatt,et al.  An estimate of tornado loads on a wood-frame building using database-assisted design methodology , 2015 .

[16]  John W. van de Lindt,et al.  Tornado Risk Analysis for Residential Wood-Frame Roof Damage across the United States , 2016 .

[17]  Jack P. Moehle,et al.  "BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-11) AND COMMENTARY" , 2011 .

[18]  Fred L. Haan,et al.  Transient Loads on Buildings in Microburst and Tornado Winds , 2006 .

[19]  John R. Hayes,et al.  Seismic Evaluation of Low-Rise Reinforced Masonry Buildings with Flexible Diaphragms: I. Seismic and Quasi-Static Testing , 2004 .

[20]  Andre Filiatrault,et al.  NUMERICAL FRAMEWORK FOR SEISMIC COLLAPSE ASSESSMENT OF RIGID WALL-FLEXIBLE DIAPHRAGM STRUCTURES , 2014 .

[21]  R. O. Hamburger,et al.  The Whittier Narrows, California Earthquake of October 1, 1987—Performance of Tilt-up Buildings , 1988 .

[22]  Rakesh Gupta,et al.  Dual-Objective-Based Tornado Design Philosophy , 2013 .

[23]  Robert Tremblay,et al.  Behavior of Roof Deck Diaphragms under Quasistatic Cyclic Loading , 2003 .

[24]  Andre Filiatrault,et al.  Distributed Yielding Concept for Improved Seismic Collapse Performance of Rigid Wall-Flexible Diaphragm Buildings , 2016 .

[25]  Mark Mahan,et al.  Statistical Analysis of Concrete Compressive Strengths for California Highway Bridges , 2014 .

[26]  John R. Hayes,et al.  Seismic Evaluation of Low-Rise Reinforced Masonry Buildings with Flexible Diaphragms: II. Analytical Modeling , 2004 .

[27]  N. Null.  Minimum Design Loads for Buildings and Other Structures , 2003 .

[28]  Takeshi Ishihara,et al.  Study of the effects of translation and roughness on tornado-like vortices by large-eddy simulations , 2016 .

[29]  John W. van de Lindt,et al.  Tornado fragility and risk assessment of an archetype masonry school building , 2016 .

[30]  Jun Hee Kim,et al.  Fragility Assessment of Light-Frame Wood Construction Subjected to Wind and Earthquake Hazards , 2004 .

[31]  Gian Paolo Cimellaro,et al.  Multidimensional Performance Limit State for Hazard Fragility Functions , 2011 .

[32]  Bruce R. Ellingwood,et al.  Probability Based Load Criteria: Load Factors and Load Combinations , 1982 .

[33]  Yukio Tamura,et al.  Ground roughness effects on internal pressure characteristics for buildings exposed to tornado-like flow , 2013 .

[34]  M. C. Cuéllar-Azcárate,et al.  Earthen masonry dwelling structures for extreme wind loads , 2015 .

[35]  Bruce R. Ellingwood,et al.  Probability-based codified design: past accomplishments and future challenges , 1994 .

[36]  Jack W. Baker,et al.  Incorporating modeling uncertainties in the assessment of seismic collapse risk of buildings , 2009 .

[37]  Paolo Gardoni,et al.  Probabilistic Demand Models and Fragility Curves for Reinforced Concrete Frames , 2006 .

[38]  Desiderio Maldonado.  Analysis of tilt-up building design and industry standard practices in tornado-prone regions , 2013 .

[39]  Andre Filiatrault,et al.  Buildings with Rigid Walls and Flexible Roof Diaphragms. I: Evaluation of Current U.S. Seismic Provisions , 2016 .

[40]  R. Panneer Selvam,et al.  Computer Modeling of Tornado Forces on a Cubic Building Using Large Eddy Simulation , 2003 .

[41]  Roger A. LaBoube,et al.  BEHAVIOR OF ARC SPOT WELD CONNECTIONS IN TENSION , 1993 .

[42]  Andre Filiatrault,et al.  Buildings with Rigid Walls and Flexible Roof Diaphragms. II: Evaluation of a New Seismic Design Approach Based on Distributed Diaphragm Yielding , 2016 .

[43]  S. R. Uma,et al.  Comparison of main-shock and aftershock fragility curves developed for New Zealand and US buildings , 2011 .