论文信息 - Developments and Trends in Monitoring and Control of Machining Processes

Developments and Trends in Monitoring and Control of Machining Processes

corresponding equipment, software and strategies are considered as well as the reasons for the limited success of some of the existing systems in use. Furtnermore, the requirements of future monitoring and ccntrol systems are worked out. Therefore a systematic analysis of present and future sytems and their components is made. Finally, the function of machining process planning and its influence on the performance and the reliability of the process is discussed.

G. Chryssolouris | I. Inasaki | R. Komanduri | B. Lindstrom

[1] K. Okamura,et al. Monitoring of Dressing and Grinding Processes with Acoustic Emission Signals , 1985 .

[2] Steven Robert Hayashi,et al. Effects of Tool Geometry on Acoustic Emission Intensity , 1988 .

[3] A. Galip Ulsoy,et al. Tool Wear and Breakage Detection Using a Process Model , 1986 .

[4] F Giusti,et al. On-Line Sensing of Flank and Crater Wear of Cutting Tools , 1987 .

[5] Andrew Kusiak. Knowledge-Based Systems in Manufacturing , 1989 .

[6] Steven Robert Hayashi,et al. Tool Break Detection by Monitoring Ultrasonic Vibrations , 1988 .

[7] B. P. Bogert,et al. The quefrency analysis of time series for echoes : cepstrum, pseudo-autocovariance, cross-cepstrum and saphe cracking , 1963 .

[8] Ichiro Inasaki,et al. Monitoring System for Cutting Tool Failure Using an Acoustic Emission Sensor : Vibration, Control Engineering, Engineering for Industry , 1987 .

[9] Hans Kurt Tönshoff,et al. Optimization of Internal Grinding by Microcomputer-Based Force Control , 1986 .

[10] C. Y. Jiang,et al. In-Process Monitoring of Tool Wear Stage by the Frequency Band-Energy Method , 1987 .