Development of eutectic high entropy alloy by addition of W to CoCrFeNi HEA
暂无分享,去创建一个
[1] P. Grant,et al. X-ray Imaging of Alloy Solidification: Crystal Formation, Growth, Instability and Defects , 2022, Materials.
[2] K. Yaqoob,et al. Systematic Development of Eutectic High Entropy Alloys by Thermodynamic Modeling and Experimentation: An Example of the CoCrFeNi-Mo System , 2021, Metals.
[3] Xingwang Cheng,et al. Microstructures and mechanical properties of CoCrFeNiHfx high-entropy alloys , 2020 .
[4] Hyoung-Seop Kim,et al. High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties , 2020 .
[5] S. Mukherjee,et al. Small-scale mechanical behavior of a eutectic high entropy alloy , 2020, Scientific Reports.
[6] J. Oliveira,et al. A Short Review on Welding and Joining of High Entropy Alloys , 2020 .
[7] A. Shafiei. Design of Eutectic High Entropy Alloys in Al–Co–Cr–Fe–Ni System , 2020, Metals and Materials International.
[8] Yong Yang,et al. Hierarchical Eutectic Structure Enabling Superior Fracture Toughness and Superb Strength in CoCrFeNiNb0.5 Eutectic High Entropy Alloy at Room Temperature , 2018, Advanced Engineering Materials.
[9] P. Liaw,et al. Effects of Constituent Elements and Fabrication Methods on Mechanical Behavior of High-Entropy Alloys: A Review , 2018, Metallurgical and Materials Transactions A.
[10] L. X. Zhang,et al. Precipitation-hardened high entropy alloys with excellent tensile properties , 2018, Materials Science and Engineering: A.
[11] D. Choudhuri,et al. Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing , 2018, Acta Materialia.
[12] L. X. Zhang,et al. A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties , 2018 .
[13] B. S. Murty,et al. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys , 2018 .
[14] N. Stepanov,et al. Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy , 2017 .
[15] Sheng Guo,et al. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range , 2017 .
[16] Ashok Kumar,et al. Analysis of Si addition on phase formation in AlCoCrCuFeNiSix high entropy alloys , 2017 .
[17] Sheng Guo,et al. Phase selection rules for cast high entropy alloys: an overview , 2015 .
[18] E. George,et al. Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries , 2014 .
[19] L. Battezzati,et al. Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems , 2014 .
[20] K. Dahmen,et al. Microstructures and properties of high-entropy alloys , 2014 .
[21] F. Samuel,et al. A Review on the Heat Treatment of Al-Si-Cu/Mg Casting Alloys , 2012 .
[22] Hong-Xiao Li,et al. Thermodynamic assessment of Co-Cr-W ternary system , 2011 .
[23] J. Cieślak,et al. Sigma-Phase in Fe-Cr and Fe-V Alloy Systems and its Physical Properties , 2011, 1105.2179.
[24] Yong Du,et al. Phase Equilibria and Thermodynamic Properties in the Fe-Cr System , 2010 .
[25] J. Tien,et al. High temperature reaction zone growth in tungsten fiber reinforced superalloy composites: Part I. Application of the moving boundary equations , 1989 .
[26] J. Newkirk,et al. Phase equilibria in the Co-Cr-W system with special emphasis on the R-phase , 1972 .
[27] I. Yermolenko,et al. Refractory metals influence on the properties of Fe-Co-Mo(W) electrolytic alloys , 2019, Materials Today: Proceedings.
[28] L. Cornish,et al. Cobalt – Iron – Tungsten , 2010 .