Dynamic characteristics and fast load following of 5-kW class tubular solid oxide fuel cell/micro-gas turbine hybrid systems

SUMMARY Combining solid oxide fuel cell and gas turbine (SOFC/GT) system is a promising concept for future clean and efficient power generation. An SOFC/GT system exploits the complementary features of the two power plants, where the GT recuperates the energy in the SOFC exhaust stream and thereby boosts the overall system efficiency. Through model-based transient analysis, however, it is shown that the intricate coupling dynamics make the transient load following very challenging. The purpose of this study is to examine the load-following capability of 5-kW class SOFC/micro-GT hybrid systems in two different configurations: single-shaft and dual-shaft GT designs. An optimal load-following operation scheme, aimed at achieving a proper trade-off between high steady-state efficiency and fast transient response is developed through model-based dynamic analysis and optimization. Simulation results are reported to illustrate the effectiveness of the proposed optimal scheme. Copyright © 2013 John Wiley & Sons, Ltd.

[1]  J. R. McDonald,et al.  An integrated SOFC plant dynamic model for power systems simulation , 2000 .

[2]  Handa Xi.  Dynamic modeling and control of planar SOFC power systems. , 2007 .

[3]  Mario L. Ferrari,et al.  Hybrid Simulation Facility Based on Commercial 100 kWe Micro Gas Turbine , 2009 .

[4]  Rory A. Roberts,et al.  Dynamic Simulation of a Pressurized 220kW Solid Oxide Fuel-Cell–Gas-Turbine Hybrid System: Modeled Performance Compared to Measured Results , 2006 .

[5]  Lars Sjunnesson,et al.  Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generation , 2000 .

[6]  E. Riensche,et al.  Methane/steam reforming kinetics for solid oxide fuel cells , 1994 .

[7]  Christoph Stiller,et al.  Safe Dynamic Operation of a Simple SOFC/GT Hybrid System , 2006 .

[8]  Jing Sun,et al.  Comparative performance assessment of 5kW-Class Solid Oxide Fuel cell engines integrated with single/dual-spool turbochargers , 2011, Proceedings of the 2011 American Control Conference.

[9]  David Tucker,et al.  Evaluation of Hybrid Fuel Cell Turbine System Startup With Compressor Bleed , 2005 .

[10]  R. G. Colclaser,et al.  Transient modeling and simulation of a tubular solid oxide fuel cell , 1999 .

[11]  Jack Brouwer,et al.  Control design of an atmospheric solid oxide fuel cell/gas turbine hybrid system: Variable versus fixed speed gas turbine operation , 2006 .

[12]  Ennio Macchi,et al.  Thermodynamic analysis of advanced power cycles based upon solid oxide fuel cells, gas turbines and rankine bottoming cycles , 1998 .

[13]  Christian Wächter,et al.  Dynamic Model of a Pressurized SOFC/Gas Turbine Hybrid Power Plant for the Development of Control Concepts , 2006 .

[14]  K. Kendall,et al.  High temperature solid oxide fuel cells : fundamentals, design and applicatons , 2003 .

[15]  Vasilios Tsourapas,et al.  Control Analysis of Integrated Fuel Cell Systems with Energy Recuperation Devices. , 2007 .

[16]  Olav Bolland,et al.  Finite-volume modeling and hybrid-cycle performance of planar and tubular solid oxide fuel cells , 2005 .

[17]  Manfred Aigner,et al.  Steady State Analysis of a SOFC/GT Hybrid Power Plant Test Rig , 2008 .

[18]  Herb Dobbs,et al.  Performance Evaluation of Solid Oxide Fuel Cell Engines Integrated With Single/Dual-Spool Turbochargers , 2011 .

[19]  C. Adjiman,et al.  Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance , 2004 .