Machine learning for extending capability of mechanical characterization to improve springback prediction of a quenching and partitioning steel

[1]  T. Balan,et al.  An Experimental and Modelling Study of Cyclic Tension-Compression Behavior of Aa7075-T6 Under Electrically-Assisted Condition , 2022, SSRN Electronic Journal.

[2]  Y. Lou,et al.  Characterization of kinematic and distortional hardening by cyclic twin-bridge shear tests for sheet metal with inverse engineering approach , 2022, Mechanics of Materials.

[3]  J. Min,et al.  Experimental characterization and modeling of complex anisotropic hardening in quenching and partitioning (Q&P) steel subject to biaxial non-proportional loadings , 2022, International Journal of Plasticity.

[4]  J. Min,et al.  Application of Laser Deposition to Mechanical Characterization of Advanced High Strength Steels Subject to Non-Proportional Loading , 2022, Experimental Mechanics.

[5]  Y. Lou,et al.  Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy , 2022, Journal of Materials Processing Technology.

[6]  W. Muhammad,et al.  A new ANN based crystal plasticity model for FCC materials and its application to non-monotonic strain paths , 2021, International Journal of Plasticity.

[7]  J. Min,et al.  Evolving asymmetric yield surfaces of quenching and partitioning steels: Characterization and modeling , 2021 .

[8]  J. Yoon,et al.  Machine learning-based constitutive model for J2- plasticity , 2021, International Journal of Plasticity.

[9]  J. Min,et al.  A non-quadratic pressure-sensitive constitutive model under non-associated flow rule with anisotropic hardening: Modeling and validation , 2020 .

[10]  Akinori Yamanaka,et al.  Deep neural network approach to estimate biaxial stress-strain curves of sheet metals , 2020 .

[11]  Julian N. Heidenreich,et al.  On the potential of recurrent neural networks for modeling path dependent plasticity , 2020 .

[12]  J. Min,et al.  Effect of tension-compression testing strategy on kinematic model calibration and springback simulation of advanced high strength steels , 2020, International Journal of Material Forming.

[13]  Yulong Lei,et al.  Design of Constant-Speed Control Method for Water Medium Hydraulic Retarders Based on Neural Network PID , 2020 .

[14]  M. Wang,et al.  Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate , 2020 .

[15]  J. Min,et al.  Effect of constitutive model on springback prediction of MP980 and AA6022-T4 , 2020, International Journal of Material Forming.

[16]  M Mozaffar,et al.  Deep learning predicts path-dependent plasticity , 2019, Proceedings of the National Academy of Sciences.

[17]  Usman Ali,et al.  Application of artificial neural networks in micromechanics for polycrystalline metals , 2019, International Journal of Plasticity.

[18]  L. Hector,et al.  Crystal plasticity modeling of 3rd generation multi-phase AHSS with martensitic transformation , 2019, International Journal of Plasticity.

[19]  Christian C. Roth,et al.  Machine-learning based temperature- and rate-dependent plasticity model: Application to analysis of fracture experiments on DP steel , 2019, International Journal of Plasticity.

[20]  Bin Gu,et al.  The deformation induced martensitic transformation and mechanical behavior of quenching and partitioning steels under complex loading process , 2018 .

[21]  G. R. Johnson,et al.  A CONSTITUTIVE MODEL AND DATA FOR METALS SUBJECTED TO LARGE STRAINS, HIGH STRAIN RATES AND HIGH TEMPERATURES , 2018 .

[22]  Bernard Rolfe,et al.  Applying a new constitutive model to analyse the springback behaviour of titanium in bending and roll forming , 2017 .

[23]  F. Barlat,et al.  Constitutive modeling for path-dependent behavior and its influence on twist springback , 2017 .

[24]  H. Huh,et al.  Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates , 2016 .

[25]  Frédéric Barlat,et al.  Constitutive and friction modeling for accurate springback analysis of advanced high strength steel sheets , 2015 .

[26]  Myoung-Gyu Lee,et al.  Advanced Issues in springback , 2013 .

[27]  Alexander Brosius,et al.  A cyclic twin bridge shear test for the identification of kinematic hardening parameters , 2012 .

[28]  J. Dongun Kim,et al.  Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels , 2012 .

[29]  H. Huh,et al.  Tension/compression test of auto-body steel sheets with the variation of the pre-strain and the strain rate , 2011 .

[30]  Kjell Mattiasson,et al.  On the modelling of the bending–unbending behaviour for accurate springback predictions , 2009 .

[31]  Kwansoo Chung,et al.  Experimental and numerical investigation of combined isotropic-kinematic hardening behavior of sheet metals , 2009 .

[32]  Luís Menezes,et al.  Study on the influence of work-hardening modeling in springback prediction , 2007 .

[33]  Cristian Teodosiu,et al.  Simple shear tests: Experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains , 2006 .

[34]  Frédéric Barlat,et al.  Continuous, large strain, tension/compression testing of sheet material , 2005 .

[35]  Paul Kang-Hoh Phua,et al.  Parallel nonlinear optimization techniques for training neural networks , 2003, IEEE Trans. Neural Networks.

[36]  F. Barlat,et al.  Plane stress yield function for aluminum alloy sheets—part 1: theory , 2003 .

[37]  Fusahito Yoshida,et al.  Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain , 2002 .

[38]  Fusahito Yoshida,et al.  A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation , 2002 .

[39]  J. K. Lee,et al.  Finite element analysis of the three-point bending of sheet metals , 2002 .

[40]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[41]  R. Mises.  Mechanik der festen Körper im plastisch- deformablen Zustand , 1913 .