Effect of additives on the performance and morphology of copoly (phthalazinone ether sulfone) UF membrane

[1]  Abdulhalim Shah Maulud,et al.  Effect of varying solvents compositions on morphology and gas permeation properties on membranes ble , 2011 .

[2]  A. Ismail,et al.  Effect of additives concentration on the surface properties and performance of PVDF ultrafiltration membranes for refinery produced wastewater treatment , 2011 .

[3]  X. Jian,et al.  Preparation and characterization of thermally stable poly(piperazine amide)/PPBES composite nanofiltration membrane , 2011 .

[4]  Yutian Wang,et al.  Preparation and characterization of novel copoly (phthalazinone ether sulfone) ultrafiltration membranes with excellent thermal stability , 2010 .

[5]  A. Ismail,et al.  Morphology and permeation properties of polysulfone membranes for gas separation: Effects of non-solvent additives and co-solvent , 2010 .

[6]  X. Jian,et al.  Effects of dope compositions on the structure and performance of PPES hollow fiber ultrafiltration membranes , 2009 .

[7]  M. Ulbricht,et al.  Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives , 2009 .

[8]  Wei Zhao,et al.  Fabrication of antifouling polyethersulfone ultrafiltration membranes using Pluronic F127 as both surface modifier and pore-forming agent , 2008 .

[9]  D. T. Liang,et al.  Effect of additives on the fabrication of poly (vinylidene fluoride-co-hexafluropropylene) (PVDF-HFP) asymmetric microporous hollow fiber membranes , 2008 .

[10]  A. Ghoshal,et al.  Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive , 2008 .

[11]  Ahmad Fauzi Ismail,et al.  Effect of additive contents on the performances and structural properties of asymmetric polyethersulfone (PES) nanofiltration membranes , 2007 .

[12]  X. Jian,et al.  Preparation of novel PPES-B UF membrane with good thermal stability: The effect of additives on membrane performance and cross-section morphology , 2006 .

[13]  Zhansheng Li,et al.  Investigation of the dynamics of poly(ether sulfone) membrane formation by immersion precipitation , 2005 .

[14]  Ying Dai,et al.  Preparation of sulfonated poly(phthalazinone ether sulfone ketone) composite nanofiltration membrane , 2005 .

[15]  M. Gonçalves,et al.  Asymmetric polysulfone and polyethersulfone membranes: effects of thermodynamic conditions during formation on their performance , 2000 .

[16]  C. A. Smolders,et al.  MASS TRANSFER AND THERMODYNAMICS DURING IMMERSION PRECIPITATION FOR A TWO-POLYMER SYSTEM : EVALUATION WITH THE SYSTEM PES-PVP-NMP-WATER , 1994 .

[17]  A. Bottino,et al.  Preparation of ultrafiltration membranes. State of the art , 1990 .

[18]  Marcel Mulder,et al.  Basic Principles of Membrane Technology , 1991 .