A comparison between a new visual method of colour matching by intraoral camera and conventional visual and spectrometric methods.

OBJECTIVES The objective of this study was to evaluate the new colour-matching Sopro Shade concept of the Sopro 717(®) intraoral camera (assisted visual evaluation method) by comparing it with the Vita 3DMaster(®) shade guide under the True Shade(®) lamp and the Vita Easyshade(®) spectrophotometric method. METHODS The basic colour of the maxillary right central incisor and canine of 38 participants was determined by three examiners then repeated the next day using the three evaluation methods. Two examiners were experienced clinicians and one was a Sopro intraoral camera engineer. The Vita 3D-Master shade guide was used with all three colour-matching methods. Kendall's tau-b correlation coefficients between the different series of tooth-colour evaluations were computed and two-tailed t-tests for paired samples were applied. RESULTS Regardless of the tooth examined, significant intra-examiner agreement (p < 0.05) occurred between the visual and the assisted visual methods. Inter-examiner reliability was higher for canines than for central incisors, for all three methods. When comparing the two visual assessments with the spectrophotometric one, Kendall's tau-b correlation coefficients were lower. When comparing the two visual methods, significant agreement (p < 0.05) was found for both canines and central incisors. CONCLUSIONS Within the limitations of this study, the Sopro Shade concept of the Sopro 717 intraoral camera is a reliable assistance to visual colour assessment compared with conventional visual methods. The reproducibility and reliability of all methods and examiners' measurements for canines were generally higher than those for central incisors. The possible clinical impact of the lower level of agreement between the two visual methods (conventional and assisted) compared with spectrophotometry should be studied further.

[1]  I. Aartman,et al.  Color coverage of a newly developed system for color determination and reproduction in dentistry. , 2010, Journal of dentistry.

[2]  C. Hämmerle,et al.  Visual and Spectrophotometric Shade Analysis of Human Teeth , 2002, Journal of dental research.

[3]  D J Horn,et al.  Sphere spectrophotometer versus human evaluation of tooth shade. , 1998, Journal of endodontics.

[4]  W D Culpepper,et al.  A comparative study of shade-matching procedures. , 1970, The Journal of prosthetic dentistry.

[5]  L. Miller,et al.  Shade selection. , 1994, Journal of esthetic dentistry.

[6]  Sproull Rc Color matching in dentistry. I. The three-dimensional nature of color. , 1973 .

[7]  R. C. Sproull,et al.  Color matching in dentistry. Part I. The three-dimensional nature of color , 1973 .

[8]  J R Shapiro,et al.  Color management. , 1994, Current opinion in cosmetic dentistry.

[9]  R J Goodkind,et al.  Use of a fiber-optic colorimeter for in vivo color measurements of 2830 anterior teeth. , 1987, The Journal of prosthetic dentistry.

[10]  J D Preston,et al.  Current status of shade selection and color matching. , 1985, Quintessence international.

[11]  Q. Li,et al.  Spectrophotometric comparison of translucent composites and natural enamel. , 2010, Journal of dentistry.

[12]  B. Moss,et al.  In vivo measurement of colour changes in natural teeth. , 2000, Journal of oral rehabilitation.

[13]  L. Miller Esthetic Dentistry Development Program , 1994 .

[14]  Jun Sk,et al.  Shade matching and communication in conjunction with segmental porcelain buildup. , 1999 .

[15]  R. J. Goodkind,et al.  Shade color discrimination by men and women. , 1991, The Journal of prosthetic dentistry.

[16]  R J Goodkind,et al.  Three-dimensional color coordinates of natural teeth compared with three shade guides. , 1990, The Journal of prosthetic dentistry.

[17]  Allyson A Barrett,et al.  Visual and instrumental agreement in dental shade selection: three distinct observer populations and shade matching protocols. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[18]  T P van der Burgt,et al.  A New Method for Matching Tooth Colors with Color Standards , 1985, Journal of dental research.

[19]  R. J. Goodkind,et al.  A comparison of Chromascan and spectrophotometric color measurements of 100 natural teeth. , 1985, The Journal of prosthetic dentistry.

[20]  S R Okubo,et al.  Evaluation of visual and instrument shade matching. , 1998, The Journal of prosthetic dentistry.

[21]  Stephen J Chu,et al.  Dental color matching instruments and systems. Review of clinical and research aspects. , 2010, Journal of dentistry.

[22]  R. D. Douglas,et al.  Acceptability of shade differences in metal ceramic crowns. , 1998, The Journal of prosthetic dentistry.

[23]  R. C. Sproull,et al.  Color matching in dentistry. Part II. Practical applications of the organization of color. 1973. , 1973, The Journal of prosthetic dentistry.

[24]  C. Sim,et al.  Human-eye versus computerized color matching. , 1999, Operative dentistry.

[25]  Holger A Jakstat,et al.  Toothguide Trainer tests with color vision deficiency simulation monitor. , 2010, Journal of dentistry.

[26]  I. Marlow,et al.  The measurement of tooth whiteness by image analysis and spectrophotometry: a comparison. , 2005, Journal of oral rehabilitation.

[27]  R. Paravina Evaluation of a newly developed visual shade-matching apparatus. , 2002, The International journal of prosthodontics.

[28]  Avishai Sadan,et al.  Comparison of the shade matching ability of dental students using two light sources. , 2006, The Journal of prosthetic dentistry.

[29]  Yong-Keun Lee,et al.  Influence of illuminants on the color distribution of shade guides. , 2006, The Journal of prosthetic dentistry.

[30]  G. Goldstein,et al.  Repeatability of a specially designed intraoral colorimeter. , 1993, The Journal of prosthetic dentistry.

[31]  B. Yılmaz,et al.  Comparison of visual shade determination and an intra-oral dental colourimeter. , 2008, Journal of oral rehabilitation.

[32]  Irene Schmidtmann,et al.  Four color-measuring devices compared with a spectrophotometric reference system. , 2010, Journal of dentistry.

[33]  R. J. Goodkind,et al.  Effects of opaque and porcelain surface texture on the color of ceramometal restorations. , 1981, The Journal of prosthetic dentistry.

[34]  R R Seghi,et al.  Effects of Instrument-measuring Geometry on Colorimetric Assessments of Dental Porcelains , 1990, Journal of dental research.

[35]  R J Goodkind,et al.  Spectrophotometric study of the relationship between body porcelain color and applied metallic oxide pigments. , 1985, The Journal of prosthetic dentistry.

[36]  Avishai Sadan,et al.  Shade-matching abilities of dental laboratory technicians using a commercial light source. , 2009, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[37]  T P van der Burgt,et al.  A comparison of new and conventional methods for quantification of tooth color. , 1990, The Journal of prosthetic dentistry.

[38]  Eugene Hittelman,et al.  The repeatability of an intraoral dental colorimeter. , 2002, The Journal of prosthetic dentistry.

[39]  M. Schmitter,et al.  Interexaminer reliability in clinical measurement of L*C*h* values of anterior teeth using a spectrophotometer. , 2007, International Journal of Prosthodontics.

[40]  G. W. Snedecor Statistical Methods , 1964 .

[41]  Ihab A Hammad,et al.  Intrarater repeatability of shade selections with two shade guides. , 2003, The Journal of prosthetic dentistry.

[42]  Y. Au,et al.  Human-eye versus computerized color matching. , 1999 .

[43]  L Miller,et al.  Organizing color in dentistry. , 1987, Journal of the American Dental Association.

[44]  R Lakowski,et al.  Instrumental colour measurement of vital and extracted human teeth. , 1981, Journal of oral rehabilitation.