The Piezoelectric Phenomenon in Energy Harvesting Scenarios: A Theoretical Study of Viable Applications in Unbalanced Rotor Systems

The present paper deals with the promising energy harvesting applications of a composite piezoelectric metal support that is properly designed for the rotor of a mechanical system. The aim is to determine whether the vibrational power coming from the static residual imbalance, which is generally considered to be an undesired and useless side-effect of the rotation, can be converted into electric power and then stored to be used in other applications. The analysis, starting from the Jeffcott rotor model and the piezoelectric constitutive equations, has been carried out by developing an approximated linear model of a piezoelectric support, in order to theoretically evaluate the performance and the feasibility of the proposed system. The accuracy of the exploited analytical model has been validated for both static and dynamic operations by 3D Ansys® Mechanical APDL. Finally, a MatLab®/Simulink® model has been built to simulate the electric behavior of the piezoelectric material, and to estimate the power that it is possible to extract via an alternative/direct current converter (AC/DC converter). The numerical results achieved confirm the effectiveness of the proposed energy-harvesting system.

[1]  Seung-Bok Choi,et al.  A Novel Piezoelectric Energy Harvester Using a Multi-Stepped Beam with Rectangular Cavities , 2018, Applied Sciences.

[2]  Wei Li,et al.  High-Speed Low-Friction Piezoelectric Motors Based On Centrifugal Force , 2017, IEEE Transactions on Industrial Electronics.

[3]  Yang Kuang,et al.  Energy harvesting during human walking to power a wireless sensor node , 2017 .

[4]  A. Tourlidakis,et al.  A Practical application of energy harvesting based on piezoelectric technology for charging portable electronic devices , 2017 .

[5]  Dong Min Kim,et al.  Piezoelectric materials for high performance energy harvesting devices , 2016, 2016 Pan Pacific Microelectronics Symposium (Pan Pacific).

[6]  M. F. Abd Malek,et al.  Power harvesting using dual transformations of piezoelectricity and magnetism: A review , 2015, 2015 IEEE Student Conference on Research and Development (SCOReD).

[7]  Alperen Toprak,et al.  Piezoelectric energy harvesting: State-of-the-art and challenges , 2014 .

[8]  Carolina M. A. Lopes,et al.  A review of piezoelectrical energy harvesting and applications , 2014, 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE).

[9]  A. Tiwari,et al.  Evaluation of piezoelectric material properties for a higher power output from energy harvesters with insight into material selection using a coupled piezoelectric-circuit-finite element method , 2013, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  Jaehwan Kim,et al.  Design, Fabrication, and Evaluation of Stepper Motors Based on the Piezoelectric Torsional Actuator , 2013, IEEE/ASME Transactions on Mechatronics.

[11]  A. Romani,et al.  Joint Modeling of Piezoelectric Transducers and Power Conversion Circuits for Energy Harvesting Applications , 2013, IEEE Sensors Journal.

[12]  Yin Wang,et al.  Study on design and experimental of a piezoelectric linear motor using columnar actuator , 2011, 2011 Symposium on Piezoelectricity, Acoustic Waves and Device Applications (SPAWDA).

[13]  P. Srinivasan,et al.  Optimal Materials Selection for Bimaterial Piezoelectric Microactuators , 2008, Journal of Microelectromechanical Systems.

[14]  T. Higuchi,et al.  Linear Step Motor Based on Magnetic Force Control Using Composite of Magnetostrictive and Piezoelectric Materials , 2007, IEEE Transactions on Magnetics.

[15]  N. Setter,et al.  Analytical modeling of the variation in apparent d/sub 33/ piezoelectric coefficient measured by the direct quasistatic method as a function of sample aspect ratio , 2004, 14th IEEE International Symposium on Applications of Ferroelectrics, 2004. ISAF-04. 2004.

[16]  N. Setter,et al.  The effect of boundary conditions and sample aspect ratio on apparent d/sub 33/ piezoelectric coefficient determined by direct quasistatic method , 2004, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[17]  Ronald S. Fearing,et al.  Development of PZT and PZN-PT based unimorph actuators for micromechanical flapping mechanisms , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[18]  W. P. Mason.  First and second order equations for piezoelectric crystals expressed in tensor form , 1947 .