Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance

[1]  F. P. Glasser,et al.  Chemically-bonded cementitious materials based on metakaolin , 1992 .

[2]  C. Dobson,et al.  The characterization of hardened alkali-activated blast-furnace slag pastes and the nature of the calcium silicate hydrate (C-S-H) phase , 1994 .

[3]  J. Davidovits High-Alkali Cements for 21st Century Concretes , 1994, "SP-144: Concrete Technology: Past, Present, and Future".

[4]  J.S.J. van Deventer,et al.  The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications☆ , 1997 .

[5]  K. MacKenzie,et al.  Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers , 2000 .

[6]  B. Vijaya Rangan,et al.  ON THE DEVELOPMENT OF FLY ASH-BASED GEOPOLYMER CONCRETE , 2004 .

[7]  J. Deventer,et al.  The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation , 2005 .

[8]  J. Deventer,et al.  Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results , 2005 .

[9]  Ángel Palomo,et al.  Alkali–aggregate reaction in activated fly ash systems , 2007 .

[10]  V. Sirivivatnanon,et al.  Workability and strength of coarse high calcium fly ash geopolymer , 2007 .

[11]  Sifeng Liu,et al.  Influence of Slag as Additive on Compressive Strength of Fly Ash-Based Geopolymer , 2007 .

[12]  Fernando Pacheco-Torgal,et al.  Alkali-activated binders: A review. Part 2. About materials and binders manufacture , 2008 .

[13]  Kwesi Sagoe-Crentsil,et al.  Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures , 2008 .

[14]  Prinya Chindaprasirt,et al.  Workability and strength of lignite bottom ash geopolymer mortar. , 2009, Journal of hazardous materials.

[15]  P. Chindaprasirt,et al.  Comparative study on the characteristics of fly ash and bottom ash geopolymers. , 2009, Waste management.

[16]  Wen-fang Zhou,et al.  Effect of activator and curing mode on fly ash-based geopolymers , 2009 .

[17]  Jay G. Sanjayan,et al.  Effect of elevated temperatures on geopolymer paste, mortar and concrete , 2010 .

[18]  Raijiwala D.B,et al.  GEOPOLYMER CONCRETE: A CONCRETE OF NEXT DECADE , 2010 .

[19]  Erich D. Rodríguez,et al.  Mechanical and thermal characterisation of geopolymers based on silicate-activated metakaolin/slag blends , 2011, Journal of Materials Science.

[20]  Mohd Mustafa Al Bakri Abdullah,et al.  Optimization of Alkaline Activator/Fly ASH Ratio on the Compressive Strength of Manufacturing Fly ASH-BASED Geopolymer , 2011 .

[21]  Abdullah Mohd Mustafa Al-Bakri,et al.  The processing, characterization, and properties of fly ash based geopolymer concrete , 2012 .

[22]  Performance and energy calculation on a green cementitious material composed of coal refuse , 2014, Clean Technologies and Environmental Policy.

[23]  J. Provis,et al.  Advances in understanding alkali-activated materials , 2015 .

[24]  John L. Provis,et al.  Alkali-activated materials , 2018, Cement and Concrete Research.