A review of biomimetic research for erosion wear resistance

[1]  T. Sınmazçelik,et al.  Effects of 3D printed surface texture on erosive wear , 2020 .

[2]  M. Chavali,et al.  Compounding and the mechanical properties of catla fish scales reinforced-polypropylene composite–from biowaste to biomaterial , 2020, Advanced Composite Materials.

[3]  Dongsheng Zhang,et al.  Enamel-inspired materials design achieving balance of high stiffness and large energy dissipation. , 2020, Journal of the mechanical behavior of biomedical materials.

[4]  L. Vergani,et al.  Squeeze-winding: A new manufacturing route for biomimetic fiber-reinforced structures , 2020 .

[5]  Yong-Wei Zhang,et al.  Numerical investigation of erosion characteristics of multiple-particle impact on ductile material with patterned surfaces , 2020 .

[6]  Xiaodong Wu,et al.  Bioinspired Nacre-like GO-based bulk with easy scale-up process and outstanding mechanical properties , 2020 .

[7]  Sahar Salehi,et al.  Spider Silk for Tissue Engineering Applications , 2020, Molecules.

[8]  G. Lu,et al.  A review of recent research on bio-inspired structures and materials for energy absorption applications , 2020 .

[9]  W. Yue,et al.  Effect of hydration on mechanical characteristics of pangolin scales , 2020, Journal of Materials Science.

[10]  B. Gangil,et al.  Influence of dolomite on mechanical, physical and erosive wear properties of natural-synthetic fiber reinforced epoxy composites , 2019, Materials Research Express.

[11]  A. P. Anaraki,et al.  Erosion Due to Solid Particle Impact on the Turbine Blade: Experiment and Simulation , 2019, Journal of Failure Analysis and Prevention.

[12]  G. Lu,et al.  Energy absorption of muscle-inspired hierarchical structure: Experimental investigation , 2019, Composite Structures.

[13]  Youhong Sun,et al.  A Bionic Study on the Anti-erosion Mechanism of Laudakia stoliczkana: Experimental and Numerical Aspects , 2019, Journal of Bionic Engineering.

[14]  S. Thirumalai Kumaran,et al.  Use of waste copper slag filled jute fiber reinforced composites for effective erosion prevention , 2019 .

[15]  M. Ghazali,et al.  Erosion resistance of laser textured plasma-sprayed Al2o3-13%Tio2 coatings on mild steel , 2019, Wear.

[16]  Saranjit Singh,et al.  Investigation of erosion behaviour of an iron-mud filled glass-fibre epoxy hybrid composite , 2019, Bulletin of Materials Science.

[17]  M. Gupta,et al.  Enhancement in erosion wear resistance of sisal composites by eco-friendly treatment and coating , 2019, Materials Research Express.

[18]  Si-wei Zhang,et al.  Advances in the application of biomimetic surface engineering in the oil and gas industry , 2019, Friction.

[19]  A. Levy,et al.  On the relationship between erosion, energy dissipation and particle size , 2019, Wear.

[20]  Yunqing Gu,et al.  Study on solid–liquid two-phase flow characteristics of centrifugal pump impeller with non-smooth surface , 2019, Advances in Mechanical Engineering.

[21]  Tongxi Yu,et al.  Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb , 2019, International Journal of Impact Engineering.

[22]  G. Ebenezer,et al.  Solid particle erosion studies on fibre composite with egg shell as filler materials , 2019, International Journal of Surface Science and Engineering.

[23]  Yong-Wei Zhang,et al.  Finite element analysis of anti-erosion characteristics of material with patterned surface impacted by particles , 2019, Powder Technology.

[24]  Sukriti Yadav,et al.  A critical evaluation of tribological interaction for restorative materials in dentistry , 2018, International Journal of Polymeric Materials and Polymeric Biomaterials.

[25]  Marc-Olivier Coppens,et al.  Re-designing materials for biomedical applications: from biomimicry to nature-inspired chemical engineering , 2018, Philosophical Transactions of the Royal Society A.

[26]  Daniel A. McAdams,et al.  The Characterization of Biological Organization, Abstraction, and Novelty in Biomimetic Design , 2018, Designs.

[27]  V. Singh,et al.  Experimental Analysis on Carbon Residuum Transformed Epoxy Resin: Chicken Feather Fiber Hybrid Composite , 2018, Polymer Composites.

[28]  Minhao Zhu,et al.  Effect of abrasive particle hardness on interface response and impact wear behavior of TC17 titanium alloy , 2018, Materials Research Express.

[29]  H. A. Sherif,et al.  Analysis of elastic and plastic impact models , 2018, Wear.

[30]  V. Kuokkala,et al.  Slurry erosion of steel – Review of tests, mechanisms and materials , 2018, Wear.

[31]  Piyush Gupta,et al.  Erosive wear reduction for safe and reliable pneumatic conveying systems: review and future directions , 2018, Life Cycle Reliability and Safety Engineering.

[32]  H. Tsang,et al.  Impact energy absorption of bio-inspired tubular sections with structural hierarchy , 2018, Composite Structures.

[33]  Ho-Young Kim,et al.  Anti-erosive mechanism of a grooved surface against impact of particle-laden flow , 2018, Wear.

[34]  A. Levy,et al.  Energy absorption by the particle and the surface during impact , 2018 .

[35]  A. Tekinay,et al.  Protective therapeutic effects of peptide nanofiber and hyaluronic acid hybrid membrane in in vivo osteoarthritis model. , 2018, Acta biomaterialia.

[36]  M. Uthayakumar,et al.  Influence of filler on erosion behavior of polymer composites: A comprehensive review , 2018 .

[37]  Franck J Vernerey,et al.  Armours for soft bodies: how far can bioinspiration take us? , 2018, Bioinspiration & biomimetics.

[38]  M. K. Pandit,et al.  Study of Solid Particle Erosion Wear Behavior of Bamboo Fiber Reinforced Polymer Composite with Cenosphere Filler , 2018 .

[39]  A. Satapathy,et al.  Erosion wear response of epoxy composites filled with steel industry slag and sludge particles: A comparative study , 2018 .

[40]  Yu Fu,et al.  PHP‐based collaborative education and management system for water hydraulic laboratory , 2018, Comput. Appl. Eng. Educ..

[41]  S. Ojha,et al.  Effects of Environmental Conditions on Erosion Wear of Eggshell Particulate Epoxy Composites , 2018, Silicon.

[42]  Dingena L. Schott,et al.  Bionic design methodology for wear reduction of bulk solids handling equipment , 2017 .

[43]  H. Wagner,et al.  The turtle carapace as an optimized multi-scale biological composite armor - A review. , 2017, Journal of the mechanical behavior of biomedical materials.

[44]  Junqiu Zhang,et al.  The Ingenious Structure of Scorpion Armor Inspires Sand-Resistant Surfaces , 2017, Tribology Letters.

[45]  J. Mohanty.  Investigation on solid particle erosion behavior of date palm leaf fiber- reinforced polyvinyl pyrrolidone composites , 2017 .

[46]  Shichao Niu,et al.  The effect of the micro-structures on the scorpion surface for improving the anti-erosion performance , 2017 .

[47]  Quanli Li,et al.  In vivo remineralization of dentin using an agarose hydrogel biomimetic mineralization system , 2017, Scientific Reports.

[48]  Yu Tian,et al.  Gas–Solid Erosive Wear of Biomimetic Pattern Surface Inspired from Plant , 2017 .

[49]  Xungai Wang,et al.  Body armour materials: from steel to contemporary biomimetic systems , 2016 .

[50]  Hisham A. Abdel-Aal,et al.  Functional surfaces for tribological applications: inspiration and design , 2016 .

[51]  M. Alsaadi,et al.  A comparative study on industrial waste fillers affecting mechanical properties of polymer-matrix composites , 2016 .

[52]  A. Gribok,et al.  Framework for Structural Online Health Monitoring of Aging and Degradation of Secondary Systems due to some Aspects of Erosion , 2016 .

[53]  N. Miyazaki.  Solid particle erosion of composite materials: A critical review , 2016 .

[54]  A Bührig-Polaczek,et al.  Biomimetic cellular metals—using hierarchical structuring for energy absorption , 2016, Bioinspiration & biomimetics.

[55]  Wang Zhiyuan,et al.  Study of a Bionic Anti-Erosion Blade in a Double Suction Centrifugal Pump , 2016 .

[56]  Zhihui Zhang,et al.  Bionic Coupling of Hardness Gradient to Surface Texture for Improved Anti-wear Properties , 2016 .

[57]  Pradeep L. Menezes,et al.  State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world , 2016 .

[58]  A. Patnaik,et al.  Numerical Simulation and Experimental Validation of Granite Powder Filled Jute Epoxy Composite for Slurry Jet Erosive Wear , 2016 .

[59]  S. K. Acharya,et al.  Mechanical and tribological performance of Luffa cylindrica fibre-reinforced epoxy composite. , 2015 .

[60]  Robert Sinko,et al.  The role of mechanics in biological and bio-inspired systems , 2015, Nature Communications.

[61]  S. Gorb,et al.  UV-NIL fabricated bio-inspired inlays for injection molding to influence the friction behavior of ceramic surfaces , 2015 .

[62]  Chun Wei,et al.  Mechanical and Wear Properties of Sisal Fiber Cellulose Microcrystal Reinforced Unsaturated Polyester Composites , 2015 .

[63]  A. Satapathy,et al.  Study on mechanical and erosion wear performance of granite filled glass-epoxy hybrid composites , 2015 .

[64]  J. Kadkhodapour,et al.  Mechanism of Foreign Object Damage and Investigating Effect of Particle Parameters on Erosion Rate of a Rough Surface Using Experimental and Numerical Methods , 2015, Journal of Failure Analysis and Prevention.

[65]  H. Wagner,et al.  Biological armors under impact—effect of keratin coating, and synthetic bio-inspired analogues , 2015, Bioinspiration & Biomimetics.

[66]  A. P. Anaraki,et al.  Simulation of Erosion by Particle Impact on a Rough Surface , 2014, Journal of Failure Analysis and Prevention.

[67]  R. Ritchie,et al.  Bioinspired structural materials. , 2014, Nature Materials.

[68]  M. Jawaid,et al.  Effect of coir fiber loading on mechanical and morphological properties of oil palm fibers reinforced polypropylene composites , 2014 .

[69]  Pankaj P. Gohil,et al.  Coalesced effect of cavitation and silt erosion in hydro turbines—A review , 2014 .

[70]  Francois Barthelat,et al.  Fabrication, testing and modeling of a new flexible armor inspired from natural fish scales and osteoderms , 2014, Bioinspiration & biomimetics.

[71]  P. Reddy,et al.  EXPERIMENTAL STUDY OF BEHAVIOUR OF POULTRY FEATHER FIBER - A REINFORCING MATERIAL FOR COMPOSITES , 2014 .

[72]  T. Narayanan,et al.  Why Muscle is an Efficient Shock Absorber , 2014, PloS one.

[73]  Quanli Li,et al.  Agarose hydrogel biomimetic mineralization model for the regeneration of enamel prismlike tissue. , 2014, ACS applied materials & interfaces.

[74]  K. Budinski.  Solid Particle Erosion , 2013 .

[75]  C. Pechmann,et al.  Policy and Research Related to Consumer Rebates: A Comprehensive Review , 2013 .

[76]  Francois Barthelat,et al.  Puncture resistance of the scaled skin from striped bass: collective mechanisms and inspiration for new flexible armor designs. , 2013, Journal of the mechanical behavior of biomedical materials.

[77]  Na Zhang,et al.  Thickness effect on particle erosion resistance of thermoplastic polyurethane coating on steel substrate , 2013 .

[78]  Michael Casey,et al.  Experimental investigation of droplet size influence on low pressure steam turbine blade erosion , 2013 .

[79]  R. Kovacevic,et al.  Finite element modeling of solid particle erosion in AISI 4140 steel and nickel–tungsten carbide composite material produced by the laser-based powder deposition process , 2013 .

[80]  H. Wagner,et al.  Micro-structure and mechanical properties of the turtle carapace as a biological composite shield. , 2013, Acta biomaterialia.

[81]  Christine Ortiz,et al.  Mechanics of composite elasmoid fish scale assemblies and their bioinspired analogues. , 2013, Journal of the mechanical behavior of biomedical materials.

[82]  Wen Yang,et al.  Natural Flexible Dermal Armor , 2013, Advanced materials.

[83]  D. Hu,et al.  Friction enhancement in concertina locomotion of snakes , 2012, Journal of The Royal Society Interface.

[84]  A. Satapathy,et al.  Prediction and Simulation of Erosion Wear Behavior of Glass-Epoxy Composites Filled with Blast Furnace Slag , 2012 .

[85]  A. Satapathy,et al.  Study on mechanical and tribo-performance of rice-husk filled glass–epoxy hybrid composites , 2012 .

[86]  S. Müftü,et al.  Simulation and analysis of the impact of micron-scale particles onto a rough surface , 2012 .

[87]  Ole Gunnar Dahlhaug,et al.  Empirical modelling of sediment erosion in Francis turbines , 2012 .

[88]  Jin Tong,et al.  Abrasive wear of embossed surfaces with convex domes , 2012 .

[89]  Y. Yang,et al.  3D ingrowth of bovine articular chondrocytes in biodegradable cryogel scaffolds for cartilage tissue engineering , 2011, Journal of tissue engineering and regenerative medicine.

[90]  C. T. Stayton.  Biomechanics on the half shell: functional performance influences patterns of morphological variation in the emydid turtle carapace. , 2011, Zoology.

[91]  G. Plaza,et al.  Polymeric fibers with tunable properties: Lessons from spider silk , 2011 .

[92]  Amar Patnaik,et al.  Effect of Different Parameters on Mechanical and Erosion Wear Behavior of Bamboo Fiber Reinforced Epoxy Composites , 2011 .

[93]  L. Jones,et al.  Low angle scouring erosion behaviour of elastomeric materials , 2011 .

[94]  W. Yue,et al.  Dependence of wear behaviors of hardmetal YG8B on coarse abrasive types and their slurry concentrations , 2011 .

[95]  U. Şen,et al.  Slurry erosion behaviors of basalt filled low density polyethylene composites , 2011 .

[96]  Lei Jiang,et al.  Bio-inspired design of multiscale structures for function integration , 2011 .

[97]  A. Kuo,et al.  Human walking isn't all hard work: evidence of soft tissue contributions to energy dissipation and return , 2010, Journal of Experimental Biology.

[98]  Thomas Speck,et al.  Pummelos as Concept Generators for Biomimetically Inspired Low Weight Structures with Excellent Damping Properties , 2010 .

[99]  Zhiwu Han,et al.  Anti-Erosion Function in Animals and its Biomimetic Application , 2010 .

[100]  Francois Barthelat,et al.  On the mechanics of fishscale structures , 2010 .

[101]  A. Patnaik,et al.  Erosive Wear Performance Analysis of Jute-Epoxy-SiC Hybrid Composites , 2010 .

[102]  A. Satapathy,et al.  A comparative study on erosion characteristics of red mud filled bamboo–epoxy and glass–epoxy composites , 2010 .

[103]  S. K. Acharya,et al.  Solid particle erosion of Bagasse fiber reinforced epoxy composite , 2010 .

[104]  Marek Balazinski,et al.  Impact stress absorption and load spreading in multi-layered erosion-resistant coatings , 2010 .

[105]  N. Barkoula,et al.  Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: A review , 2010 .

[106]  J F V Vincent,et al.  Biomimetics — a review , 2009, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[107]  M. Horstemeyer,et al.  A study on the structure and mechanical behavior of the Terrapene carolina carapace: A pathway to design bio-inspired synthetic composites , 2009 .

[108]  A. Patnaik,et al.  A study on processing, characterization and erosion behavior of fish (Labeo-rohita) scale filled epoxy matrix composites , 2009 .

[109]  N. Hanagata,et al.  Elemental distribution analysis of type I collagen fibrils in tilapia fish scale with energy-filtered transmission electron microscope. , 2009, Micron.

[110]  Jasmine A. Nirody,et al.  The mechanics of slithering locomotion , 2009, Proceedings of the National Academy of Sciences.

[111]  Thomas Scheibel,et al.  Spider silk: from soluble protein to extraordinary fiber. , 2009, Angewandte Chemie.

[112]  M. Balazinski,et al.  Predictive tools for the design of erosion resistant coatings , 2008 .

[113]  R. P. Saini,et al.  A review on silt erosion in hydro turbines , 2008 .

[114]  M. Balazinski,et al.  Design of hard coating architecture for the optimization of erosion resistance , 2008 .

[115]  M. Boyce,et al.  Materials design principles of ancient fish armour. , 2008, Nature materials.

[116]  M. Yazdani-Pedram,et al.  Eggshell, a new bio-filler for polypropylene composites , 2007 .

[117]  L. Dalla Valle,et al.  Hard (Beta-)keratins in the epidermis of reptiles: composition, sequence, and molecular organization. , 2007, Journal of proteome research.

[118]  M. Husain,et al.  Preparation and characterization of polyether-based polyurethane dolomite composite , 2007 .

[119]  A. Gürses,et al.  Adsorptive removal of phosphate from aqueous solutions using raw and calcinated dolomite. , 2006, Journal of hazardous materials.

[120]  John D Currey,et al.  How Well Are Bones Designed to Resist Fracture? , 2003, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[121]  W. Sawyer,et al.  A study on the friction and wear behavior of PTFE filled with alumina nanoparticles , 2003 .

[122]  R. Owen-Smith,et al.  Megaherbivores: The Influence of Very Large Body Size on Ecology , 1990 .

[123]  Akdogan Gulsen,et al.  Biotribology of Cartilage Wear in Knee and Hip Joints Review of Recent Developments , 2018 .

[124]  S. More,et al.  Recent Research Status on Erosion Wear – An Overview , 2017 .

[125]  David Felix,et al.  Experimental Investigation On Suspended Sediment, Hydro-Abrasive Erosion And Efficiency Reductions Of Coated Pelton Turbines , 2017 .

[126]  H. Akil,et al.  Tribological Characteristics of Green Biocomposites , 2017 .

[127]  Hongwei Zhou,et al.  Bionic surface design of cemented carbide drill bit , 2016 .

[128]  R. Bhatnagar,et al.  A Review on Composition and Properties of Bagasse Fibers , 2015 .

[129]  S. K. Acharya,et al.  A comparative investigation of bio waste filler (wood apple‐coconut) reinforced polymer composites , 2014 .

[130]  A. Satapathy,et al.  Erosion Wear Performance Analysis of Polyester-GF-Granite Hybrid Composites using the Taguchi Method , 2012 .

[131]  A. Satapathy,et al.  Polymer composites reinforced with short fibers obtained from poultry feathers , 2007 .

[132]  Zhendong,et al.  Research progress in gecko locomotion and biomimetic gecko-robots , 2007 .

[133]  A. Sinatora,et al.  Effect of hard second phase on cavitation erosion of Fe-Cr-Ni-C alloys , 2005 .

[134]  J. Bitter.  A study of erosion phenomena part I , 1963 .