CCCs off-axial orientation sensitivity analysis in hole pin-bearing failure via hierarchical multiscale simulation framework

[1]  A. Ravindran,et al.  A review of the structural factors which control compression in carbon fibres and their composites , 2022, Composite Structures.

[2]  F. Taheri‐Behrooz,et al.  Phenomenological Constitutive Modeling of the Non-Linear Loading-Unloading Response of UD Fiber-Reinforced Polymers , 2022, Composite Structures.

[3]  Weihan Wang,et al.  An insight into the mechanical behavior of adhesively bonded plain-woven-composite joints using multiscale modeling , 2022, International Journal of Mechanical Sciences.

[4]  M. Heidari-Rarani,et al.  Three-dimensional progressive damage and failure analysis of double-lap composite bolted joints under quasi-static tensile loading , 2022, Composite Structures.

[5]  G. Voyiadjis,et al.  A new anisotropic elasto-plastic-damage model for quasi-brittle materials using strain energy equivalence , 2021, Mechanics of Materials.

[6]  R. S. Choudhry,et al.  Multiscale damage modelling of 3D woven composites under static and impact loads , 2021, Composites Part A: Applied Science and Manufacturing.

[7]  Hamed Abdoli,et al.  The effect of electrical discharge machining parameters on the surface quality of 3D woven carbon/carbon composite , 2021, Materials Today: Proceedings.

[8]  G. Fang,et al.  Damage analysis of shear pre-deformed 3D angle-interlock woven composites using experiment and non-orthogonal finite element model , 2021, Composites Communications.

[9]  Libin Zhao,et al.  Uncertainty evaluation for bearing fatigue property of CFRP double-lap, single-bolt joints , 2021, Chinese Journal of Aeronautics.

[10]  M. Sheikhzadeh,et al.  Intralayer hybridization of triaxially braided composite lamina using carbon and basalt fibers: Experimental and numerical study , 2021, Composite Structures.

[11]  Z. Shan,et al.  A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction , 2021 .

[12]  Hejun Li,et al.  Three-dimensional pore-scale study of the directional heat transfer in a high thermal conductivity carbon/carbon composite protection system , 2021 .

[13]  F. Taheri‐Behrooz,et al.  A new constitutive model to predict effective elastic properties of plain weave fabric composites , 2021 .

[14]  Xudong Hu,et al.  Off-axial angle sensitivity of 3D orthogonal woven composite failure behavior subjected to in-plane compressive loading , 2020 .

[15]  Xiaoguang Yang,et al.  A multi-scale stochastic model for damage analysis and performance dispersion study of a 2.5D fiber-reinforced ceramic matrix composites , 2020 .

[16]  Z. Qi,et al.  An experimental investigation on interfacial behavior and preload response of composite bolted interference-fit joints under assembly and thermal conditions , 2020 .

[17]  I. Tsukrov,et al.  Predicting the overall response of an orthogonal 3D woven composite using simulated and tomography-derived geometry , 2020 .

[18]  A. Ghosh,et al.  Thermo-mechanical modeling of C/C 3D orthogonal and angle interlock woven fabric composites in high temperature environment , 2020 .

[19]  Han Yan,et al.  Multiscale modeling and failure analysis of an 8-harness satin woven composite , 2020, Composite Structures.

[20]  Jaehoon Kim,et al.  Study on bearing strength and failure mode of a carbon-epoxy composite laminate for designing bolted joint structures , 2020 .

[21]  B. Liu,et al.  Internal three-dimensional strain evolution of the failure process for short carbon fiber composite through in situ synchrotron radiation X-ray computed tomography , 2020 .

[22]  A. Mazaheri,et al.  Strength prediction of woven composite rings using progressive damage modeling , 2020 .

[23]  Pravendra Kumar,et al.  Experimental Analysis of Electrical Discharge Drilling (EDD) of Carbon-Carbon Composite , 2020 .

[24]  G. Vignoles,et al.  Modeling of the non-linear mechanical and thermomechanical behavior of 3D carbon/carbon composites based on internal interfaces , 2019 .

[25]  F. Trochu,et al.  Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling , 2019, Composites Part A: Applied Science and Manufacturing.

[26]  Licheng Guo,et al.  A progressive damage model for three-dimensional woven composites under ballistic impact loading , 2019, Engineering Research Express.

[27]  Yves Chemisky,et al.  Fully coupled thermo-viscoplastic analysis of composite structures by means of multi-scale three-dimensional finite element computations , 2019, International Journal of Solids and Structures.

[28]  P. Camanho,et al.  Mesoscale modelling of damage in half-hole pin bearing composite laminate specimens , 2019, Composite Structures.

[29]  S. S. Samareh-Mousavi,et al.  A nonlinear FE analysis to model progressive fatigue damage of cross-ply laminates under pin-loaded conditions , 2019, International Journal of Fatigue.

[30]  E. Pourahmadi,et al.  A 3D RVE model with periodic boundary conditions to estimate mechanical properties of composites , 2019 .

[31]  Xudong Hu,et al.  Numerical investigation on the effect of tow tension on the geometry of three-dimensional orthogonally woven fabric , 2019, Textile Research Journal.

[32]  Xiaoguang Yang,et al.  The effect of off-axis angles on the mesoscale deformation response and failure behavior of an orthotropic textile carbon-epoxy composite , 2018, Composite Structures.

[33]  K. Zhou,et al.  Experimental and numerical investigation on mechanical behaviors of woven fabric composites under off-axial loading , 2018, International Journal of Mechanical Sciences.

[34]  S. M. Hasheminia,et al.  Failure load prediction of composite bolted joint with clamping force , 2018 .

[35]  H. Moghaddam,et al.  Nonlinear numerical analysis of the V-notched rail shear test specimen , 2018 .

[36]  H. Bakhshan,et al.  Characteristic length determination of notched woven composites , 2018 .

[37]  D. Hui,et al.  Recent advances in carbon-fiber-reinforced thermoplastic composites: A review , 2017, Composites Part B: Engineering.

[38]  Ahmad Reza Ghasemi,et al.  Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects , 2017 .

[39]  Antonios Kontsos,et al.  Investigation of the Z-binder role in progressive damage of 3D woven composites , 2017 .

[40]  J. Leng,et al.  Quantitative and qualitative analyses of mechanical behavior and dimensional stability of styrene-based shape memory composites , 2017 .

[41]  F. Irisarri,et al.  Experimental characterization of the bearing behavior of 3D woven composites , 2017 .

[42]  C. McCarthy,et al.  Bearing damage characteristics of fibre-reinforced countersunk composite bolted joints subjected to quasi-static shear loading , 2017 .

[43]  Chenglong Hu,et al.  Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review , 2017 .

[44]  Yves Chemisky,et al.  Periodic homogenization for fully coupled thermomechanical modeling of dissipative generalized standard materials , 2016 .

[45]  Baozhong Sun,et al.  Multi-scale structure modeling of damage behaviors of 3D orthogonal woven composite materials subject to quasi-static and high strain rate compressions , 2016 .

[46]  Roberto Lopez-Anido,et al.  Progressive failure analysis of three-dimensional woven carbon composites in single-bolt, double-shear bearing , 2016 .

[47]  A. Chrysanthou,et al.  A review of the catalytic oxidation of carbon–carbon composite aircraft brakes , 2015 .

[48]  R. Lopez-Anido,et al.  Behavior of three-dimensional woven carbon composites in single-bolt bearing , 2015 .

[49]  António R. Melro,et al.  Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I – Constitutive modelling , 2013 .

[50]  Sebastian Heimbs,et al.  Static and dynamic failure behaviour of bolted joints in carbon fibre composites , 2013 .

[51]  M. Shokrieh,et al.  Finite element modeling of mode I delamination growth in laminated DCB specimens with R-curve effects , 2013 .

[52]  A. Airoldi,et al.  Identification of material parameters for modelling delamination in the presence of fibre bridging , 2012 .

[53]  Nicholas G. Tsouvalis,et al.  Experimental and numerical investigation of Mode II fracture in fibrous reinforced composites , 2011 .

[54]  Xiaoguang Yang,et al.  Application of a high thermal conductivity C/C composite in a heat-redistribution thermal protection system , 2010 .

[55]  Srinivasa D. Thoppul,et al.  Mechanics of mechanically fastened joints in polymer–matrix composite structures – A review , 2009 .

[56]  Stephen R Hallett,et al.  Cohesive zone length in numerical simulations of composite delamination , 2008 .

[57]  Ireneusz Lapczyk,et al.  Progressive damage modeling in fiber-reinforced materials , 2007 .

[58]  Guy Gendron,et al.  Analysis of bolted joints in composite laminates: Strains and bearing stiffness predictions , 2007 .

[59]  A. Morais,et al.  Application of the effective crack method to mode I and mode II interlaminar fracture of carbon/epoxy unidirectional laminates , 2007 .

[60]  W. Kuo,et al.  Effect of weaving processes on compressive behavior of 3D woven composites , 2007 .

[61]  Y. Takao,et al.  Effects of Temperature on the Bearing Strength of CF/Epoxy Pinned Joints , 2007 .

[62]  Lorenzo Iannucci,et al.  An energy based damage mechanics approach to modelling impact onto woven composite materials-Part I: Numerical models , 2006 .

[63]  G. Alfano.  On the influence of the shape of the interface law on the application of cohesive-zone models , 2006 .

[64]  Xinwei Wang,et al.  On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites , 2006 .

[65]  Takashi Ishikawa,et al.  Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation) , 2005 .

[66]  Takashi Ishikawa,et al.  Bearing strength and failure behavior of bolted composite joints (part II: modeling and simulation) , 2005 .

[67]  Masayuki Nakada,et al.  Accelerated Testing for Long-term Durability of FRP Laminates for Marine Use , 2004 .

[68]  Stefan Hallström,et al.  Bearing strength of carbon fibre/epoxy laminates: effects of bolt-hole clearance , 2004 .

[69]  F. Ellyin,et al.  A unified periodical boundary conditions for representative volume elements of composites and applications , 2003 .

[70]  Masaru Zako,et al.  Finite element analysis of damaged woven fabric composite materials , 2003 .

[71]  Javier Segurado,et al.  A numerical approximation to the elastic properties of sphere-reinforced composites , 2002 .

[72]  Joakim Schön,et al.  Coefficient of friction of composite delamination surfaces , 2000 .

[73]  F. L. Matthews,et al.  A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates , 1999 .

[74]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[75]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[76]  J. Whitney,et al.  Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations , 1974 .