The integration of design and control: IMC control and robustness

This paper discusses the problem of integrating the process and control design steps for a chemical process. The cost function to be optimized includes capital cost, operating cost and a cost due to variability in the controlled variable. A distillation column was selected as a case study and a single input single output (SISO) controller was used. A First Order Plus Dead Time (FOPDT) model was assumed to represent the process where the dynamic parameters were estimated as functions of process design variables. A robust internal model control (IMC) controller was designed based on a nominal linear model assuming model error to account for process nonlinearity. The optimum column design and the closed loop time constant which resulted in the lowest objective function cost were determined. The proposed method was compared to the traditional one where the design and control steps are performed separately in a sequential fashion. The optimization results show that the integration of column design and control in one step leads to savings up to 42% compared to the traditional method.

[1]  Efstratios N. Pistikopoulos,et al.  Optimal design of dynamic systems under uncertainty , 1996 .

[2]  Christodoulos A. Floudas,et al.  Analyzing the interaction of design and control—1. A multiobjective framework and application to binary distillation synthesis , 1994 .

[3]  Efstratios N. Pistikopoulos,et al.  Simultaneous Design and Control Optimization under Uncertainty in Reaction / Separation Systems , 2002 .

[4]  Efstratios N. Pistikopoulos,et al.  The interactions of design and control: double-effect distillation , 2000 .

[5]  Daniel R. Lewin,et al.  A simple tool for disturbance resiliency diagnosis and feedforward control design , 1996 .

[6]  Peter L. Lee.  Nonlinear Process Control , 1993 .

[7]  David M. Himmelblau,et al.  Integration of Flexibility and Control in Process Design , 1994 .

[8]  Efstratios N. Pistikopoulos,et al.  Optimal design and control of a high-purity industrial distillation system , 2001 .

[9]  Evanghelos Zafiriou,et al.  Robust process control , 1987 .

[10]  Efstratios N. Pistikopoulos,et al.  Simultaneous design and control optimisation under uncertainty , 2000 .

[11]  John E. Rijnsdorp,et al.  Early Integration of Process and Control Design , 1992 .

[12]  Efstratios N. Pistikopoulos,et al.  The interactions of design control and operability in reactive distillation systems , 2002 .

[13]  Efstratios N. Pistikopoulos,et al.  The interactions of design, control and operability in reactive distillation systems , 2001 .

[14]  John D. Perkins,et al.  OPTIMIZATION AS A TOOL FOR DESIGN/CONTROL INTEGRATION , 1994 .

[15]  A. M. Blanco,et al.  Interaction between process design and process operability of chemical processes: an eigenvalue optimization approach , 2003, Comput. Chem. Eng..

[16]  Manfred Morari,et al.  Internal model control and process uncertainty: mapping uncertainty regions for SISO controller design , 1986 .