Linearly Sensitive and Flexible Pressure Sensor Based on Porous Carbon Nanotube/Polydimethylsiloxane Composite Structure

We developed a simple, low-cost process to fabricate a flexible pressure sensor with linear sensitivity by using a porous carbon nanotube (CNT)/polydimethylsiloxane (PDMS) composite structure (CPCS). The working principle of this pressure sensor is based on the change in electrical resistance caused by the contact/non-contact of the CNT tip on the surface of the pores under pressure. The mechanical and electrical properties of the CPCSs could be quantitatively controlled by adjusting the concentration of CNTs. The fabricated flexible pressure sensor showed linear sensitivity and excellent performance with regard to repeatability, hysteresis, and reliability. Furthermore, we showed that the sensor could be applied for human motion detection, even when attached to curved surfaces.

[1]  Zefeng Chen,et al.  Flexible Piezoelectric-Induced Pressure Sensors for Static Measurements Based on Nanowires/Graphene Heterostructures. , 2017, ACS nano.

[2]  Shuhong Yu,et al.  A Flexible and Highly Pressure‐Sensitive Graphene–Polyurethane Sponge Based on Fractured Microstructure Design , 2013, Advanced materials.

[3]  F. Huo,et al.  Microstructured graphene arrays for highly sensitive flexible tactile sensors. , 2014, Small.

[4]  Dong Wang,et al.  Facile Fabrication of Conductive Graphene/Polyurethane Foam Composite and Its Application on Flexible Piezo-Resistive Sensors , 2019, Polymers.

[5]  Donghwan Kim,et al.  Wearable piezoresistive strain sensor based on graphene-coated three-dimensional micro-porous PDMS sponge , 2019, Micro and Nano Systems Letters.

[6]  Ji Hoon Kim,et al.  Reverse‐Micelle‐Induced Porous Pressure‐Sensitive Rubber for Wearable Human–Machine Interfaces , 2014, Advanced materials.

[7]  Conor J. Walsh,et al.  A Highly Sensitive Capacitive‐Based Soft Pressure Sensor Based on a Conductive Fabric and a Microporous Dielectric Layer , 2018 .

[8]  Jin-Woo Han,et al.  Flexible, compressible, hydrophobic, floatable, and conductive carbon nanotube-polymer sponge , 2013 .

[9]  Sanboh Lee,et al.  Superhydrophobic and superoleophilic properties of graphene-based sponges fabricated using a facile dip coating method , 2012 .

[10]  Jin-Woo Choi,et al.  An embedded PDMS nanocomposite strain sensor toward biomedical applications , 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[11]  E. Capria,et al.  Percolation of single-walled carbon nanotubes in ceramic matrix nanocomposites , 2004 .

[12]  Zhong Lin Wang,et al.  Recent Progress in Electronic Skin , 2015, Advanced science.

[13]  Bin Yu,et al.  Highly responsive flexible strain sensor using polystyrene nanoparticle doped reduced graphene oxide for human health monitoring , 2018, Carbon.

[14]  Kyo Sang Choi,et al.  A novel means of fabricating microporous structures for the dielectric layers of capacitive pressure sensor , 2017 .

[15]  Tao Jiang,et al.  Fully Packaged Self‐Powered Triboelectric Pressure Sensor Using Hemispheres‐Array , 2016 .

[16]  F. Xuan,et al.  Flexible pressure sensor using carbon nanotube-wrapped polydimethylsiloxane microspheres for tactile sensing , 2018, Sensors and Actuators A: Physical.

[17]  Bin Yu,et al.  Highly sensitive flexible tactile sensors based on microstructured multiwall carbon nanotube arrays , 2017 .

[18]  Benjamin C. K. Tee,et al.  An electrically and mechanically self-healing composite with pressure- and flexion-sensitive properties for electronic skin applications. , 2012, Nature nanotechnology.

[19]  R. Dauskardt,et al.  An ultra-sensitive resistive pressure sensor based on hollow-sphere microstructure induced elasticity in conducting polymer film , 2014, Nature Communications.

[20]  Chunya Wang,et al.  Carbonized Cotton Fabric for High‐Performance Wearable Strain Sensors , 2017 .

[21]  K. Friedrich,et al.  Evaluation and visualization of the percolating networks in multi-wall carbon nanotube/epoxy composites , 2009 .

[22]  Chih-Feng Wang,et al.  Robust superhydrophobic/superoleophilic sponge for effective continuous absorption and expulsion of oil pollutants from water. , 2013, ACS applied materials & interfaces.

[23]  Hang Zhao,et al.  Highly sensitive piezo-resistive graphite nanoplatelet-carbon nanotube hybrids/polydimethylsilicone composites with improved conductive network construction. , 2015, ACS applied materials & interfaces.

[24]  Wen Liu,et al.  A transparent single-friction-surface triboelectric generator and self-powered touch sensor , 2013 .

[25]  Zhenan Bao,et al.  Pursuing prosthetic electronic skin. , 2016, Nature materials.

[26]  Dusan Losic,et al.  Selective adsorption of oil–water mixtures using polydimethylsiloxane (PDMS)–graphene sponges , 2015 .

[27]  Luhai Li,et al.  Printed and Flexible Capacitive Pressure Sensor with Carbon Nanotubes based Composite Dielectric Layer , 2019, Micromachines.

[28]  Qiang Gao,et al.  Flexible tactile sensor using the reversible deformation of poly(3-hexylthiophene) nanofiber assemblies. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[29]  Malgorzata Jakubowska,et al.  Screen-Printed Resistive Pressure Sensors Containing Graphene Nanoplatelets and Carbon Nanotubes , 2014, Sensors.

[30]  Haixia Zhang,et al.  Highly Compressible Integrated Supercapacitor-Piezoresistance-Sensor System with CNT-PDMS Sponge for Health Monitoring. , 2017, Small.

[31]  Benjamin C. K. Tee,et al.  Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers. , 2010, Nature materials.

[32]  I. Park,et al.  Highly Sensitive and Wearable Liquid Metal‐Based Pressure Sensor for Health Monitoring Applications: Integration of a 3D‐Printed Microbump Array with the Microchannel , 2019, Advanced healthcare materials.

[33]  F. Scarpa,et al.  Carbon Nano-ink Coated Open Cell Polyurethane Foam with Micro-architectured Multilayer Skeleton for Damping Applications , 2016 .