Preparation and Performance of Plasma/Polymer Composite Coatings on Magnesium Alloy
暂无分享,去创建一个
M. Medraj | H. Bakhsheshi‐Rad | E. Hamzah | M. Daroonparvar | A. Shah | M. Kasiri-Asgarani | S. Bagheriyan | H. R. Bakhsheshi‐Rad
[1] A. Ismail,et al. Microstructural, mechanical properties and corrosion behavior of plasma sprayed NiCrAlY/nano-YSZ duplex coating on Mg-1.2Ca-3Zn alloy , 2015 .
[2] A. Ismail,et al. Synthesis and corrosion behavior of a hybrid bioceramic-biopolymer coating on biodegradable Mg alloy for orthopaedic implants , 2015 .
[3] M. Medraj,et al. Corrosion and mechanical performance of double-layered nano-Al/PCL coating on Mg-Ca-Bi alloy , 2015 .
[4] H. Bakhsheshi‐Rad,et al. The Mechanical Properties and Corrosion Behavior of Double-Layered Nano Hydroxyapatite-Polymer Coating on Mg-Ca Alloy , 2015, Journal of Materials Engineering and Performance.
[5] H. Bakhsheshi‐Rad,et al. The role of bismuth on the microstructure and corrosion behavior of ternary Mg–1.2Ca–xBi alloys for biomedical applications , 2015 .
[6] L. Pagnotta,et al. Microstructural, mechanical and tribological properties of nanostructured YSZ coatings produced with different APS process parameters , 2015 .
[7] N. Yusof,et al. Improvement of Corrosion Resistance of Binary Mg-Ca Alloys Using Duplex Aluminum-Chromium Coatings , 2015, Journal of Materials Engineering and Performance.
[8] Ming Liu,et al. Corrosion characterization of micro-arc oxidization composite electrophoretic coating on AZ31B magnesium alloy , 2015 .
[9] Xiuzhou Lin,et al. Fabrication and corrosion resistance of a hydrophobic micro-arc oxidation coating on AZ31 Mg alloy , 2015 .
[10] B. S. Boroujeny. DESIGN AND INVESTIGATION OF TIO2 –SIO2 THIN FILMS ON AISI 316L STAINLESS STEEL FOR TRIBOLOGICAL PROPERTIES AND CORROSION PROTECTION , 2015 .
[11] M. Staiger,et al. The Mechanical Properties and Corrosion Behavior of Quaternary Mg-6Zn-0.8Mn-xCa Alloys , 2015, Journal of Materials Engineering and Performance.
[12] N. Yusof,et al. Microstructural characterization and corrosion resistance evaluation of nanostructured Al and Al/AlCr coated Mg–Zn–Ce–La alloy , 2014 .
[13] M. Nazoktabar,et al. Investigation of three steps of hot corrosion process in Y2O3 stabilized ZrO2 coatings including nano zones , 2014 .
[14] Lida Shen,et al. Microstructural characterization of Al2O3–13 wt.% TiO2 ceramic coatings prepared by squash presetting laser cladding on GH4169 superalloy , 2014 .
[15] Yi-Nan Zhang,et al. Critical assessment and thermodynamic modeling of Mg–Ca–Zn system supported by key experiments , 2014 .
[16] S. Gnedenkov,et al. Composite polymer-containing protective coatings on magnesium alloy MA8 , 2014 .
[17] M. Zamri,et al. Effects of Mn Additions on the Structure, Mechanical Properties, and Corrosion Behavior of Cu-Al-Ni Shape Memory Alloys , 2014, Journal of Materials Engineering and Performance.
[18] C. Tseng,et al. The structures, electrochemical and cell performance of titania films formed on titanium by micro-arc oxidation , 2014 .
[19] J. Pan,et al. Influence of polyaniline and ceria nanoparticle additives on corrosion protection of a UV-cure coating on carbon steel , 2014 .
[20] Z. Xin,et al. Polybenzoxazine/SiO2 nanocomposite coatings for corrosion protection of mild steel , 2014 .
[21] Raheleh Ahmadi-Pidani,et al. Comparison of hot corrosion behaviors of plasma-sprayed nanostructured and conventional YSZ thermal barrier coatings exposure to molten vanadium pentoxide and sodium sulfate , 2014 .
[22] R. Shoja-Razavi,et al. The influence of laser treatment on thermal shock resistance of plasma-sprayed nanostructured yttria stabilized zirconia thermal barrier coatings , 2014 .
[23] R. A. Antunes,et al. Corrosion Performance of Anodized AZ91D Magnesium Alloy: Effect of the Anodizing Potential on the Film Structure and Corrosion Behavior , 2014, Journal of Materials Engineering and Performance.
[24] R. Razavi,et al. Spray drying of nanometric SYSZ powders to obtain plasma sprayable nanostructured granules , 2013 .
[25] Zhi-shui Yu,et al. Microstructure evolution of laser remelted Al2O3–13 wt.%TiO2 coatings , 2013 .
[26] D. Guo,et al. Coaxial laser cladding of Al2O3-13%TiO2 powders on Ti-6Al-4 V alloy , 2013 .
[27] S. Lamaka,et al. Plasma anodized ZE41 magnesium alloy sealed with hybrid epoxy-silane coating , 2013 .
[28] Xizhi Fan,et al. Investigation of the bond coats for thermal barrier coatings on Mg alloy , 2013 .
[29] Funan Chen,et al. Corrosion Behavior of AZ91D Magnesium Alloy in Three Different Physiological Environments , 2013, Journal of Materials Engineering and Performance.
[30] P. Chu,et al. The effect of interlayer on corrosion resistance of ceramic coating/Mg alloy substrate in simulated physiological environment , 2012 .
[31] Mohammed Rafiq Abdul Kadir,et al. Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys , 2012 .
[32] C. Peng,et al. Corrosion Behavior of Magnesium Alloy AP65 in 3.5% Sodium Chloride Solution , 2012, Journal of Materials Engineering and Performance.
[33] Xizhi Fan,et al. Preparation and Characterization of 8YSZ Thermal Barrier Coatings on Rare Earth-Magnesium Alloy , 2011 .
[34] H. Wong,et al. A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants. , 2010, Biomaterials.
[35] K. Unocic,et al. Characterization of the alumina scale formed on a commercial MCrAlYHfSi coating , 2010 .
[36] M. Lebourg,et al. Characterization of calcium phosphate layers grown on polycaprolactone for tissue engineering purposes , 2010 .
[37] Hyoun‐Ee Kim,et al. Nanostructured poly(epsilon-caprolactone)-silica xerogel fibrous membrane for guided bone regeneration. , 2010, Acta biomaterialia.
[38] Keith D K Luk,et al. A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants. , 2010, Biomaterials.
[39] Chonggui Li,et al. Toughening and strengthening mechanism of plasma sprayed nanostructured Al2O3–13 wt.%TiO2 coatings , 2009 .
[40] Tao Zhang,et al. Microstructure, spallation and corrosion of plasma sprayed Al2O3–13%TiO2 coatings , 2009 .
[41] Tao Zhang,et al. Sliding wear and electrochemical corrosion behavior of plasma sprayed nanocomposite Al2O3-13%TiO2 coatings , 2009 .
[42] Lida Shen,et al. Microstructural characteristics and formation mechanism of Al2O3–13 wt.% TiO2 coatings plasma-sprayed with nanostructured agglomerated powders , 2009 .
[43] Basil R. Marple,et al. Thermal Spray Coatings Engineered from Nanostructured Ceramic Agglomerated Powders for Structural, Thermal Barrier and Biomedical Applications: A Review , 2007 .
[44] E. Ghali,et al. General and localized corrosion of magnesium alloys: A critical review , 2004 .
[45] L. Shaw,et al. Indentation fracture behavior of plasma-sprayed nanostructured Al2O3-13wt.%TiO2 coatings , 2003 .