Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells

The open-circuit voltage (VOC) of bulk-heterojunction solar cells based on [6,6]-phenyl C61-butyric acid methyl ester (PCBM) as electron acceptor and poly[2-methoxy-5(3′,7′-dimethyloctyloxy)-p-phenylene vinylene] (OC1C10-PPV) as an electron donor has been investigated. In contrast to the present understanding, it is now demonstrated that for non-ohmic contacts the experimental VOC is determined by the work function difference of the electrodes. A total variation of more than 0.5 V of the VOC was observed by variation of the negative electrode (cathode) work function. For ohmic contacts the VOC is governed by the LUMO and HOMO levels of the acceptor and donor, respectively, which pin the Fermi levels of the cathode and anode. The band bending created by accumulated charges at an ohmic contact produce a considerable loss in VOC of 0.2 V at room temperature. The experimentally observed voltage loss in VOC of 0.38 V due to the presence of ohmic contacts at both interfaces strongly limits the maximum open-circ...

[1]  J. G. Simmons,et al.  Space‐Charge Effects on Emission‐Limited Current Flow in Insulators , 1967 .

[2]  J. Simmons.  Theory of metallic contacts on high resistivity solids—I. Shallow traps , 1971 .

[3]  A. J. Heeger,et al.  Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene , 1992, Science.

[4]  H. Bässler.  Charge Transport in Disordered Organic Photoconductors a Monte Carlo Simulation Study , 1993 .

[5]  G. Malliaras,et al.  Photovoltaic measurement of the built-in potential in organic light emitting diodes and photodiodes , 1998 .

[6]  H. Bässler,et al.  CURRENT INJECTION FROM A METAL TO A DISORDERED HOPPING SYSTEM. II. COMPARISON BETWEEN ANALYTIC THEORY AND SIMULATION , 1999 .

[7]  C. Brabec,et al.  Origin of the Open Circuit Voltage of Plastic Solar Cells , 2001 .

[8]  Yang Yang,et al.  Solvation-Induced Morphology Effects on the Performance of Polymer-Based Photovoltaic Devices , 2001 .

[9]  C. Brabec,et al.  Plastic Solar Cells , 2001 .

[10]  P. Blom,et al.  Temperature dependence of the charge injection in poly-dialkoxy-p-phenylene vinylene , 2001 .

[11]  C. Brabec,et al.  2.5% efficient organic plastic solar cells , 2001 .

[12]  Christoph J. Brabec,et al.  Temperature dependence for the photovoltaic device parameters of polymer-fullerene solar cells under operating conditions , 2001 .

[13]  Richard H. Friend,et al.  Photovoltaic Performance and Morphology of Polyfluorene Blends: A Combined Microscopic and Photovoltaic Investigation , 2001 .

[14]  C. Brabec,et al.  Effect of LiF/metal electrodes on the performance of plastic solar cells , 2002 .

[15]  G. Hadziioannou,et al.  On interface dipole layers between C60 and Ag or Au , 2002 .

[16]  Richard H. Friend,et al.  The origin of the open-circuit voltage in polyfluorene-based photovoltaic devices , 2002 .

[17]  Mm Martijn Wienk,et al.  Electron Transport in a Methanofullerene , 2003 .