Life Cycle Costing in Sustainability Assessment—A Case Study of Remanufactured Alternators

Sustainability is on the international agenda, and is a driver for industry in international competition. Sustainability encompasses the three pillars: environment, society and economy. To prevent shifting of burden, the whole life cycle needs to be taken into account. For the environmental dimension of sustainability, life cycle assessment (LCA) has been practiced for a while and is a standardized method. A life cycle approach for the social and economic pillars of sustainability needs to be further developed. This paper investigates the application of life cycle costing (LCC) as part of a wider sustainability assessment where also social life cycle assessment (SLCA) and LCA are combined. LCA-type LCC is applied on a case study of remanufactured alternators. Remanufacturing of automobile parts is a fast growing important business with large potential for cost and resource savings. Three design alternatives for the alternator and three locations for the remanufacturing plant are evaluated. The remanufacturer perspective and the user perspective are investigated. The results for the LCA-type LCC show that the largest cost for the remanufacturer is the new parts replacing old warn parts. However, the user cost, and therein especially, cost for fuel used for the alternator’s power production dominates and should be the focus for further improvement. In conducting the case study, it was revealed that the connection between the LCA-type LCC results and the economic dimension of sustainability needs to be further investigated and defined. For this purpose, areas of protection for life cycle sustainability assessment and LCA-type LCC in particular need further development.

[1]  Aldo Roberto Ometto,et al.  Ecodesign methods focused on remanufacturing , 2010 .

[2]  Peggy Zwolinski,et al.  Remanufacturing strategies to support product design and redesign , 2008 .

[3]  Hong-Chao Zhang,et al.  Remanufacturing Engineering Literature Overview and Future Research Needs , 2011 .

[4]  Jens Warsen,et al.  Comparative Life Cycle Assessment of Remanufacturing and New Manufacturing of a Manual Transmission , 2011 .

[5]  Timo Ala-Risku,et al.  Life cycle costing: a review of published case studies , 2008 .

[6]  Caroline Freund,et al.  Trading on Time , 2006, The Review of Economics and Statistics.

[7]  N. Warburg,et al.  Obtaining environmental benefits by application of electronic systems-automotive LCA case study: starter generator vs. conventional system , 2002, Conference Record 2002 IEEE International Symposium on Electronics and the Environment (Cat. No.02CH37273).

[8]  Günther Seliger,et al.  Automated Image Based Recognition of Manual Work Steps in the Remanufacturing of Alternators , 2011 .

[9]  Y. Asiedu,et al.  Product life cycle cost analysis: State of the art review , 1998 .

[10]  Rolf Steinhilper,et al.  Management des Produktlebenslaufs , 2009 .

[11]  Johan Östlin,et al.  Product life-cycle implications for remanufacturing strategies , 2009 .

[12]  S. Al-Athel,et al.  Report of the World Commission on Environment and Development: "Our Common Future" , 1987 .

[13]  Erwin M. Schau,et al.  Towards Life Cycle Sustainability Assessment , 2010 .

[14]  Luís Bragança,et al.  Building Sustainability Assessment , 2010 .

[15]  David Hunkeler,et al.  Introduction: History of Life Cycle Costing, Its Categorization, and Its Basic Framework , 2008 .

[16]  Ingrid Bouwer Utne,et al.  Life cycle cost (LCC) as a tool for improving sustainability in the Norwegian fishing fleet , 2009 .

[17]  Diana J. Bendz.  Electronics and the Environment , 1998, Computer.

[18]  Walter Klöpffer,et al.  Life-Cycle Based Sustainability Assessment of Products , 2008 .

[19]  Patricia Capdevielle.  International Comparisons of Hourly Compensation Costs , 1989 .

[20]  Walter Kl√∂pffer.  Outlook Role of Environmental Life Cycle Costing in Sustainability Assessment , 2008 .

[21]  Caroline Freund,et al.  Trading on Time , 2006 .

[22]  Armin Fügenschuh,et al.  Scenario Technique with Integer Programming for Sustainability in Manufacturing , 2010, Heinz Nixdorf Symposium.

[23]  H. Daly,et al.  Natural Capital and Sustainable Development , 1992 .

[24]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[25]  Michael Zwicky Hauschild,et al.  From Life Cycle Assessment to Sustainable Production: Status and Perspectives , 2005 .

[26]  M. Hauschild,et al.  A Framework for Social Life Cycle Impact Assessment (10 pp) , 2006 .

[27]  武彦 福島.  持続可能性(Sustainability)の要件 , 2006 .

[28]  Gjalt Huppes,et al.  Modeling for Life Cycle Costing , 2008 .

[29]  M. Finkbeiner,et al.  The anthropogenic stock extended abiotic depletion potential (AADP) as a new parameterisation to model the depletion of abiotic resources , 2011 .

[30]  David Hunkeler,et al.  Environmental Life Cycle Costing , 2008 .

[31]  Christoph Koffler,et al.  On the calculation of fuel savings through lightweight design in automotive life cycle assessments , 2009 .

[32]  Mitsutaka Matsumoto,et al.  Business frameworks for sustainable society: a case study on reuse industries in Japan , 2009 .

[33]  Balbir S. Dhillon.  Life Cycle Costing: Techniques, Models and Applications , 1989 .

[34]  Rolf Steinhilper,et al.  Kfz-Ersatzteilversorgung durch Austauschteileproduktion (Remanufacturing) von mechatronischen Baugruppen spart Rohstoffe und Energie , 2006 .

[35]  Cecilia Haskins,et al.  A framework for environmental analyses of fish food production systems based on systems engineering principles , 2010, Syst. Eng..

[36]  Andreas Ciroth,et al.  Is LCC relevant in a sustainability assessment? , 2011 .

[37]  G. Seliger,et al.  Characteristics of the automotive remanufacturing enterprise with an economic and environmental evaluation of alternator products , 2009 .

[38]  Göran Finnveden,et al.  Best available practice regarding impact categories and category indicators in life cycle impact assessment , 1999 .

[39]  G. Keoleian,et al.  The Value of Remanufactured Engines: Life‐Cycle Environmental and Economic Perspectives , 2004 .

[40]  Ruud H. Teunter,et al.  Optimal core acquisition and remanufacturing policies under uncertain core quality fractions , 2011, Eur. J. Oper. Res..

[41]  E. Sundin,et al.  Analysis of service selling and design for remanufacturing , 2000, Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment (Cat. No.00CH37082).

[42]  Almut Beate Heinrich,et al.  Ökobilanz (LCA) – Ein Leitfaden für Ausbildung und Beruf von Walter Klöpffer und Birgit Grahl , 2009 .

[43]  C. A. McMahon,et al.  Development of design for remanufacturing guidelines to support sustainable manufacturing , 2006 .

[44]  Walter Klöpffer,et al.  Life-Cycle based methods for sustainable product development , 2003 .

[45]  Berit Goldstein,et al.  Livscykelkostnader : Till vilken nytta för miljön och plånboken? , 2010 .

[46]  Shaligram Pokharel,et al.  Pricing used products for remanufacturing , 2009, Eur. J. Oper. Res..

[47]  Rainer Friedrich,et al.  Application of the impact pathway analysis in the context of LCA , 1998 .

[48]  Harold Bright Maynard,et al.  Methods-time measurement , 1948 .

[49]  Joann E D’Esposito.  Bureau of Labor Statistics Web Site , 2000 .