A sub-nanometric three-axis surface encoder with short-period planar gratings for stage motion measurement

Abstract A three-axis surface encoder was developed for stage motion measurement with sub-nanometric resolutions. The surface encoder was composed of a scale XY planar grating with X- and Y-directional periodic grating structures and an optical sensor head for reading the grating structures. A reference XY planar grating, which had the same periodic structures as those of the scale XY grating, was employed in the optical reading head. Four sets of interference signals, which were generated by superimposition of the X and Y-directional ±1 order diffracted beams from the two gratings, were employed for evaluation of the X-, Y- and Z-directional displacements of the optical sensor head with respect to the scale grating. The X- and Y-directional periodic structures of the gratings directly acted as the scale graduations for the X- and Y-directional displacement measurements, while the wavelength of the laser beam acted as the graduation period for the Z-directional displacement measurement. X- and Y-directional rectangular structures with a short period of 1 μm were designed and fabricated by the light lithography based on two beams interference for improvement of the resolutions of the surface encoder for X- and Y-directional position measurement. An optical sensor head was designed and constructed for reading the short period gratings. Experiments were carried out to confirm the basic performances of the three-axis surface encoder.

[1]  Yuichi Okazaki,et al.  Precision nano-fabrication and evaluation of a large area sinusoidal grid surface for a surface encoder , 2003 .

[2]  Lifeng Li,et al.  New formulation of the Fourier modal method for crossed surface-relief gratings , 1997 .

[3]  John A. Kramar,et al.  Nanometre resolution metrology with the Molecular Measuring Machine , 2005 .

[4]  Yoon Keun Kwak,et al.  A linear air bearing stage with active magnetic preloads for ultraprecise straight motion , 2010 .

[5]  Zhengchun Du,et al.  Research on Error Modelling and Identification of 3 Axis NC Machine Tools Based on Cross Grid Encoder Measurement , 2006 .

[6]  Alan Campbell.  Measurement of lathe Z-slide straightness and parallelism using a flat land , 1995 .

[7]  Stuart T. Smith,et al.  Design evaluation of a single-axis precision controlled positioning stage , 2009 .

[8]  Lee Tong Heng,et al.  Precision Motion Control , 2001 .

[9]  S. Mekid,et al.  Conceptual design and study of high precision translational stages: application to an optical delay line , 1997 .

[10]  K. Fan,et al.  A 6-degree-of-freedom measurement system for the accuracy of X-Y stages , 2000 .

[11]  Yoshikazu Arai,et al.  Design and construction of a two-degree-of-freedom linear encoder for nanometric measurement of stage position and straightness , 2010 .

[12]  David L. Trumper,et al.  The long-range scanning stage: a novel platform for scanned-probe microscopy , 2000 .

[13]  Wei Gao,et al.  A Three-axis Displacement Sensor with Nanometric Resolution , 2007 .

[14]  Wei Gao,et al.  Measurement and compensation of error motions of a diamond turning machine , 2007 .

[15]  Shuichi Dejima,et al.  A surface motor-driven planar motion stage integrated with an XYθZ surface encoder for precision positioning , 2004 .

[16]  Hayato Yoshioka,et al.  A newly developed three-dimensional profile scanner with nanometer spatial resolution , 2010 .

[17]  Huzefa Shakir,et al.  Design and precision construction of novel magnetic-levitation-based multi-axis nanoscale positioning systems , 2007 .

[18]  Wei Gao,et al.  Position and out-of-straightness measurement of a precision linear air-bearing stage by using a two-degree-of-freedom linear encoder , 2010 .

[19]  Bin Fang,et al.  Experimental analysis and simulation of nonlinear microscopic behavior of ball screw mechanism for ultra-precision positioning , 2011 .

[20]  A. Weckenmann,et al.  Probing Systems in Dimensional Metrology , 2004 .

[21]  Lijiang Zeng,et al.  Fabrication of optical mosaic gratings: a self-referencing alignment method. , 2011, Optics express.

[22]  Sheng-Hua Lu,et al.  High resolution planar encoder by retro-reflection , 2005 .

[23]  Chien-Hung Liu,et al.  Design and control of a long-traveling nano-positioning stage , 2010 .

[24]  Tilo Pfeifer,et al.  Scales vs. laser interferometers performance and comparison of two measuring systems , 1993 .

[25]  Arnold Teimel,et al.  Technology and applications of grating interferometers in high-precision measurement , 1992 .

[26]  Andrew B. Kahng,et al.  A power-constrained MPU roadmap for the International Technology Roadmap for Semiconductors (ITRS) , 2009, 2009 International SoC Design Conference (ISOCC).

[27]  Wei Ph. D. Gao.  Precision Nanometrology: Sensors and Measuring Systems for Nanomanufacturing , 2010 .

[28]  Lijiang Zeng,et al.  Fabrication of optical mosaic gratings with phase and attitude adjustments employing latent fringes and a red-wavelength dual-beam interferometer. , 2009, Optics express.

[29]  Yoshikazu Arai,et al.  Measurement of multi-degree-of-freedom error motions of a precision linear air-bearing stage , 2006 .